CNC tekinimo staklės

VDF Boehringer DUS 1000 ti

Būklė: geras (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 28820005482, X ašies eiga: 1 000 mm, Y ašies eiga: 800 mm, Z ašies eigos atstumas: 500 mm, X ašies padavimo greitis: 50 m/min, Y ašies padavimo greitis: 50 m/min, padavimo greitis Z ašis: 50 m/min, greitas poslinkis X ašimi: 50 m/min, greitas poslinkis Y ašis: 50 m/min, greitasis eiga Z ašyje: 50 m/min, Įranga: dokumentacija / vadovas, Dear Sir or Madam, We are selling a DMC 100 V hi-dyn machining center in good condition. Itjdovx N Shepfx Aggen Unfortunately, the year of manufacture is not documented in writing, but we assume it is from 2001. Please refer to the attached images for further details. We are, of course, available at any time to answer any questions you may have. The machine can be inspected under power by appointment. Collection with a suitable truck is to be organized by the buyer. Dismantling and removal of the machine can be carried out either by the buyer or by us (at an additional cost of €1,500).

Gamybos metai: 1993, būklė: paruoštas naudoti (naudotas), Centų aukštis: 280 mm, atstumas tarp centrų: 2000 mm, tekinimo skersmuo virš lovio/slankiklio: 570 mm/365 mm, veleno anga: 62 mm, apsukos: 2500 aps./min., didžiausias ruošinio svoris: 1000 kg, lovos plotis: 360 mm. Staklių matmenys X/Y/Z: apie 4000 mm/2250 mm/2000 mm, svoris: apie 5500 kg, valdymas: Siemens. Galima apžiūra vietoje. Iodoxq Eyujpfx Aggetn

Būklė: geras (naudotas), bendras svoris: 13 000 kg, bendras plotis: 2 200 mm, bendras ilgis: 8 000 mm, bendras aukštis: 3 300 mm, BOLDRINI RIBO 20HY/4000 – Flanšavimo ir kalotės formavimo mašina Gamintojas: BOLDRINI (Italija) Modelis: RIBO 20HY/4000 Tipas: Hidraulinė flanšavimo ir kalotės formavimo mašina Maks. ruošinio skersmuo: 4 000 mm Pritaikymo sritis: Katilų dugnų, slėginių indų dugnų ir rezervuarų dugnų gamyba. Iodpfjzil H Esx Aggjtn Mašinos ilgis: 8 000 mm Mašinos plotis: 2 200 mm Mašinos aukštis: 3 300 mm Svoris: 13 000 kg Atkreipkite dėmesį: Šiame puslapyje pateikta informacija buvo surinkta pagal mūsų geriausias žinias ir, jei įmanoma, iš gamintojo. Informacija yra pateikta sąžiningai, tačiau tikslumas negarantuojamas. Tai nėra pasiūlymas ar sutartinės sąlygos. Rekomenduojame patikrinti visą svarbią informaciją.

Būklė: naudotas, Gamybos metai: 2004, Technical details: x-travel: 1500 mm y-travel: 1000 mm z-travel: 1000 mm CNC control: TNC 530 Spindle operating hours: not yet known Milling spindle speed range: 1: 30 to 930 and 2: 930 to 4000 / stepless rpm Tool holder: horizontal/vertical: SK 50 (DIN 69871/DIN 69872 Type A) Spindle torque: 1000 Nm Spindle head swivels left and right: 90° Feed rate: 1 - 6000 mm/min Feed force: 30 kN Rapid traverse: 15 m/min Number of tools: 1 pc. Clamping surface table L x W: 1600 x 800 mm Table load capacity: 40 kN Operating voltage: 400 V / 50 Hz Total power requirement: 42 kW Machine weight approx.: 15.2 t Compressed air: 6.3 bar Machine dimensions approx. L x W x H: 3.1 x 4.7 x 2.6 m Dimensions: coolant filter: 1.9 x 1.6 x 1.4 m Required floor space approx. L x W: 38.5 m² Applications: Milling, drilling, thread cutting, boring with direct encoded linear measuring systems the guides for all three axes are flat slideways Itjdpfx Agou Nc Rijgsn milling head position controlled +/-90° internal coolant supply (IKZ) and external cooling milling spindle rated drive power 22 kW with integrated hydraulic unit up to 100 bar operating pressure with coolant system, high pressure pump 60 bar (internal cooling), nominal flow 20 l/min, and low pressure pump 4 bar (external cooling), as well as spray gun compact belt filter RESY REBER SYSTEMATIC GmbH, Type KBF 452/710 hinged belt chip conveyor DGS, Type SSF 600 P50, year 2004 Accessories: Measuring probe SK40 Reference tool SK40 Milling head SEMPUCO

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Overhauled: 2024 Year of manufacture: 1994–2000 Saw blade: 560 mm Motor power: 6.5 / 8.0 kW Speed: 1500/3000 rpm Cutting speed: 2100 – 4200 m/min Saw height adjustment: electronic Working range square max.: 170x170 mm Working range flat max.: 300x150 mm Working range round max.: 200 mm Saw feed: 0 – 40 mm/s, continuously adjustable Itsdeuiy Hrjpfx Aggjn Cut length: 5–950 mm (9999 mm with multiple stroke) Feed rate max.: 500 mm/s Weight: approx. 1900 kg Dimensions LxWxH: 2200 mm x 2700 mm x 1950 mm After the retrofit, the machine is in a like-new condition, both technically and visually. Thanks to its equipment and construction, the machine can be used very efficiently for a wide range of applications. The programmed HMI control ensures simple and highly profitable operation of the system. The soundproof cabin minimizes noise emissions. The machine is fully overhauled in-house according to customer requirements. Among others, the following components are renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operator interface - Replacement of ball screw - Replacement of servo motor and servo drive - New electrical components - New pneumatic lines - New pneumatic components - Overhaul and/or replacement of all pneumatic cylinders - Renewal of valve island - Optimization of extraction performance - Overhaul of minimum quantity lubrication system - Replacement of general wear parts - Overhaul of the cabin Additionally, the machine is equipped with: - Soundproof cabin - Kerf extension (for high-quality cut surfaces without return marks) - Fully electronic height adjustment Warranty: Unless otherwise agreed, we provide a 6-month warranty on all overhauled or replaced parts. Labor time and wear parts are excluded from the warranty. Optional equipment: - Mass clamping system for parallel sawing of multiple workpieces - Flat magazine for automatic feed of up to 6 m long bar stock - Roller conveyors for bar stock - Reinforced motor 18.0 kW (frequency-controlled) - Delivery and installation at your site - Training of your personnel

Gamybos metai: 2014, būklė: reikia remonto (naudotas), Funkcionalumas: visiškai funkcionalus, The machine has been out of use for several years, therefore it requires maintenance before being put into operation, which will be the responsibility of the purchaser. Iedpjtu U Ebefx Aggotn

Gamybos metai: 1997, būklė: labai geros būklės (naudotas), A used, very well-maintained cold circular saw from EISELE, equipped with a 370 mm circular saw blade, infinitely adjustable hydro-pneumatic feed, pneumatic material clamping, coolant system, and documentation. Speed: 17/34 rpm Cutting capacity: Itjdpfx Aokfp D Teggon - Round 90°/45° right, left / 30° right: 130/130/105 mm - Square 90°/45° right, left / 30° right: 120x120/100x100/90x90 mm - Rectangular 90°/45° right, left / 30° right: 200x100/140x100/100x100 mm Pneumatic connection: 7 bar Working height: 900 mm Machine dimensions (W x D x H): 865 x 1332 x 2175 mm Weight: 460 kg For further technical details, please refer to the PDF document. Technical data and dimensions: subject to errors and change without notice.

Būklė: naudotas, Gamybos metai: 1966, Max. pulling force 5 t, maximum stroke 850 mm, maximum cutting speed 12 m/min, maximum return speed 25 m/min, clamping surface 410x575 mm, slot width 3 - 90 mm, drilling diameter 13 - 500 mm, workpiece weight: 6000 kg, depth of machine base below floor 1,400 mm. Itjdpfxocm Elnj Aggon

Būklė: geras (naudotas), Gamybos metai: 2011, Ref. No.: 10598 Iedpfox Hn D Rex Aggstn Manufacturer: HELLER Model: MC 2000 Year of manufacture: 2011 Control type: CNC control Controller: Siemens 840 D sl Location: Halberstadt Country of origin: Germany Machine No.: 50XXXX X-axis travel: 800 mm Y-axis travel: 800 mm Z-axis travel: 1000 mm Working spindle torque (at 25% DC): 242 Nm Tool holder: SK 40 Number of tool stations in magazine: 54 Tool magazine equipped with: 80 pcs. Spindle speed: 10,000 rpm Main spindle drive power: 17 kW High-pressure pump: 50 bar Main spindle speed range: 10,000 rpm Number of pallets: 2 Pallet size (LxW): 630 x 500 mm Machine weight approx.: 13,000 kg Spindle hours: 7,000 h Operating hours: 14,000 h Set-up stations: 4 x 90° Hydraulic pressure: 200 bar Additional information: - Machine has been measured - Geometry is in excellent (1A) condition - Spindle runs somewhat rough - Clamping towers and tool holders included - 2 additional clamping towers - 2 spare pallets - 2-axis servo tool changer - Scraper conveyor for dry machining - Cold light in work area - Central cooling unit for motor spindle and electrical cabinet - Operator panel at the set-up station - NC-controlled rotary table - Clamping hydraulics Machine can be inspected under power by arrangement.

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2024, Completely overhauled: 2024 Control system: Siemens S7 PLC Saw blade max: 500 mm Motor power: 4.0 kW Saw blade feed: 0–40 mm/s, steplessly adjustable Saw blade height adjustment: electronic Working range, square at 90° max.: 130 x 130 mm Working range, flat at 90° max.: 190 x 130 mm Working range, round at 90° max.: 170 mm The machine has been completely overhauled in our facility and is in like-new condition. Among other things, the following components have been renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operator interface - Conversion to servo-controlled pusher - New electrical components - New pneumatic lines - New pneumatic components - Retrofit to valve manifold - Optimized extraction performance - New minimum quantity lubrication system - Replacement of general wear parts - Refurbishing of the enclosure In addition, the machine features: Ijdpfeuiy Ngjx Aggotn - Minimum quantity lubrication - Splitter extension (for high-quality cut surfaces without drag marks) - Loading magazine for gentle handling of painted/anodized surfaces - Scrap piece ejection in the pusher - Foldable scrap piece tray Options: - Magazine width: 3,000 mm - Pusher length: 6,000 mm - Pusher length: 8,000 mm - Reinforced motor: 5.5 kW - Multiple clamping device for parallel sawing of several workpieces - Online support connection - Delivery and installation at your site - Training for your staff