Plokščių ir plokščių apdorojimas

UWM UWM 100

Sąlyga: naujas, Cutting capacity at 90 degrees: round 255 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangular 300 x 180 mm Saw band length: 2,765 x 27 x 0.9 mm Table height: 950 mm Band speed: 18 – 110 m/min Total power requirement: 1.5 kW Machine weight approx. 0.42 t Space requirement approx. 1.23 x 1.7 x 1.75 m SPECIAL OFFER PRICE!!! Double-mitre metal band saw, frequency inverter, hydraulic semi-automatic GBS 250 Super HA-I Easy - Mitre cuts left 60° and right 45° - Material height sensor (automatic cut start detection) - One-piece cast frame and gearbox; exceptionally quiet and low-vibration cutting - Hydraulic vice, laterally adjustable - Guided, high-quality industrial bearings - Robust vice and machine casting Nljdofgyh Uepfx Aduei - Large machine bed - Machine base with tool compartment and chip drawer - Cut monitoring via ammeter - Feed pressure regulator - Support roller (material infeed side) - Ball-bearing rotary table Semi-automatic operation: 1. Clamp material 2. Start saw 3. Fast lowering to material edge, or for series cutting, cut immediately 4. Saw blade stops 5. Raise frame just above the material 6. Open vice

Sąlyga: naujas, Cutting Range: - Round 0°: 170 mm - Square 0°: 150 x 150 mm - Flat 0°: 150 x 190 mm - Round 45°: 125 mm - Square 45°: 95 x 120 mm Working height: 870 mm Cutting speeds: 40 / 80 m/min Saw blade: 2080 x 20 x 0.9 mm Coolant pump: 100 W Saw motor: 0.75 kW Connection: 400 V Dimensions (L x W x H, approx.): 1340 x 810 x 1320 mm Weight, approx.: 146 kg Features: - Saw bow swivels up to 45° - Equipped with two blade speeds for optimal adjustment to the workpiece - Ideal for cutting pipes, profiles, and solid materials made of stainless steel, iron, etc. - Generously sized saw arm for low-vibration operation - Hydraulic lowering of the saw arm via hydraulic cylinder - Low-noise operation thanks to robust design - Automatic shut-off at end of cut via micro limit switch - Quick-release vice for easy and fast clamping of workpieces - Precise, adjustable blade guides for optimal cutting results - Coolant system with pump - Includes base frame - CE/IEC compliant, German documentation and German service Scope of Delivery: - Bi-metal saw blade 2080 x 20 x 0.9 mm, 6/10 TPI - Blade tension adjustable via pressure gauge - Quick-release vice Njdpfsilk H Tjx Adujli - Material stop - Coolant system with pump - Hydraulic lowering cylinder - Motor protection switch - Automatic cut-off at end of cut - Base frame

Sąlyga: naujas, Gamybos metai: 2025, For sawing, for example, stainless steel, tool steel, hollow profiles, and solid materials Two-pole drive motor enables band speeds of 30 and 65 m/min Saw blade tension is monitored electromechanically via a microswitch When raising the saw arm, the lowering cylinder locks in the upper position via the solenoid valve—no additional locking on the cylinder required Saw arm inclined by 25°, resulting in longer blade service life Precise and robust blade guides with adjustable carbide plates After completion of the cutting process, the saw band stops automatically in the lower end position Saw arm lowering by gravity or manually Infinitely variable, constant saw arm lowering speed via hydraulic cylinder Dimensions and weights Length approx. 1200 mm Width/depth approx. 650 mm Height approx. 1800 mm Weight approx. 270 kg Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Machine data Saw band speed(s): 30 / 65 m/min Speed settings: 2 Saw band length: 2450 mm Saw band width: 27 mm Saw band thickness: 0.9 mm Material feed Material feed table height: 925 mm Nsdpfx Aeg U Uv Rsdujli Cutting capacities 0° round (tube): 220 mm 0° round (solid material): 120 mm 0° rectangular horizontal (hollow profile): 230 x 150 mm 0° bundle (tube): 230 x 120 mm -45° round (tube): 160 mm -45° round (solid material): 85 mm -45° rectangular horizontal (hollow profile): 160 x 90 mm -60° round (tube): 90 mm -60° round (solid material): 55 mm -60° rectangular horizontal (hollow profile): 90 x 90 mm Art. No.: 3680001 Location: Ex stock 54634 Bitburg - Immediately available -

Sąlyga: naujas, Motor power: 1.2 kW, 50Hz/400V Throat opening: Blade dimensions: 2450 x 27 x 0.9 mm Weight: 240 kg Cutting speed: 35 + 70 m/min Cutting capacity 0°: 220 / 210 x 150 / 230 x 185 mm Cutting capacity 45° right: Cutting capacity 45° left: 150 / 150 x 150 / 150 x 210 mm Cutting capacity 60° right: Cutting capacity 60° left: 90 / 90 x 90 / 90 x 100 mm Nledpfx Adjgrlapouei Description: The Zimmer Z241/R is a gravity-feed mitre saw for cuts from 0° to 60° to the left. After the cut, the machine stops automatically via a safety limit switch. The feed rate can be infinitely adjusted via the hydraulic system. Raising the saw arm after the cut can be done to any position; the saw arm remains locked in the desired position. The Z241/R comes equipped with: - Hydraulic cylinder - Coolant pump - Eccentric clamp - Base frame - Saw blade - 400V plug (16A) The machine is delivered fully assembled and ready for immediate operation. Footprint: 870 x 1550 x 1740 mm Working height: 915 mm Other configurations available on request.

Sąlyga: naujas, - Capacity: 160 tons - Cylinder stroke: 400 mm - Working width: 1,100 mm - Movable cylinder - Electrically or manually operated - Pressure gauge - Emergency stop Nljdpfxjg Sr Rps Aduoi - 400V

Sąlyga: naujas, Cutting capacity at 90 degrees: round 240 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangular 165 x 310 mm Saw blade length: 2725 x 27 x 0.9 mm Table height: 890 mm Band speed: 35 / 70 m/min Total power requirement: 1.1 kW Machine weight: approx. 0.35 t Dimensions (LxWxH): 1.7 x 0.75 x 1.8 m The Z252/DG is equipped with the following features: - Hydraulic cylinder - Coolant pump - Eccentric vice - Base frame - Saw blade - 400V plug (16A) Nljdpfohpktvox Aduoi The machine is delivered fully assembled and ready for immediate operation.

Sąlyga: naujas, Techniniai duomenys: Talpa: 160 t Įrengimo aukštis: 1100 mm Darbinė zona, maks.: 1100 x 350 mm Stūmoklio eiga: 400 mm Njdpfxsk Nz Nts Adueli Eigos greitis: 6,2 mm/s Atbulinės eigos greitis: 6,8 mm/s Variklio galia: 5,5 kW Plotis: 1640 mm Gylis: 1000 mm Aukštis: 2550 mm Svoris, apie: 1300 kg Įranga: - Šoninis perstumiama cilindras su krumpline pavara, krumpliaračiu ir rankiniu ratu - Erdvi darbo zona - Aukščio reguliuojamas stalas - Standi, suvirinto plieno konstrukcija - Manometras - Slėgio tikslus reguliavimas - Papildomas rankinis siurblys Atraminiai prizmai galimi už papildomą kainą.

Sąlyga: naujas, Saw blade --- 2925 x 27 x 0.9 mm Sawing speed --- variable 20 ~ 80 m/min Motor --- 400V - 2.2 kW Weight --- 495 kg Cutting capacity 90° --- 270 mm / 260 x 320 mm Cutting capacity 60° --- 140 mm / 140 x 140 mm Nlsdpfoga Tzuox Adusi Cutting capacity 45° --- 230 mm / 220 x 220 mm Cutting capacity -45° --- 200 mm / 220 x 150 mm INCLUDES Saw blade Workpiece stop Base cabinet Manometer for saw blade tension Saw blade guide with carbide inserts Quick-release vice Coolant pump Hydraulic cylinder Motor protection switch Automatic cut-off

Sąlyga: naujas, Cutting diameter: 220 mm Saw band length: 2450 mm Cutting width: 250 mm Cutting speed: 40 / 80 m/min Saw band dimensions: 2450 x 27 x 0.9 mm Cutting capacity at 60° round: 100 mm Cutting capacity at 60° square: 90 mm Njdpfx Ajlb I A Sjdusli Cutting capacity at 60° flat: 90 x 90 mm Cutting capacity at 45° round: 160 mm Cutting capacity at 45° rectangular: 160 x 110 mm Cutting capacity at 90° rectangular: 250 x 190 mm Total power requirement: 0.75 / 1.1 kW Table height: 925 mm Machine weight: approx. 218 kg Space requirement: approx. 1300 x 700 x 1530 mm