Pramoninis robotas

Universal Robots UR5-CB3.1

Būklė: paruoštas naudoti (naudotas), Funkcionalumas: ribota funkcionalumas, disko skersmuo: 525 mm, Weight approx. 1,900 kg Dimensions (LxWxH) approx. 1,800x1,500x2,200 mm Working disc diameter: 525 mm Maximum disc ring width: 175 mm Maximum workpiece dimension: 170 mm Working disc speed: 45/70/90/140 rpm Main drive power: 4.0 kW Nwsdpoh Invrsfx Abzsh Connection: 400V/50Hz Emergency stop switch Conventional control with operator panel Fully-featured lapping machine, conventional control

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, Naudotas CNC tekinimo-frezavimo centras Nwodpfx Aoy D Tz Njbzoh Pagrindinis ir priešinis velenas C ašis Y ašis Papildomi techniniai duomenys bus pridėti.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2022, veikimo valandos: 3 728 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 0040001634C, tekėjimo ilgis: 500 mm, tekėjimo skersmuo: 240 mm, ašies variklio galia: 1 400 W, veleno greitis (min.): 5 000 aps./min, veleno greitis (maks.): 6 000 aps./min, veleno skylė: 170 mm, X ašies eiga: 210 mm, Y ašies eiga: 525 mm, Z ašies eigos atstumas: 525 mm, greitas poslinkis X ašimi: 30 m/min, greitas poslinkis Y ašis: 22 m/min, greitasis eiga Z ašyje: 30 m/min, sukimo momentas: 171 192 Nm, padavimo jėga X ašis: 3 N, DMG MORI CTX Alpha 500 pagaminta 2022 metais. Šis universalus tekinimo centras turi Siemens valdiklį ir LNZ Quick load servo 80S2. Svoris: 4 300 kg. Nwedpfxeyz S T Se Abzsh Dėl išsamesnės informacijos apie šį įrenginį susisiekite su mumis.

Būklė: paruoštas naudoti (naudotas), An automated tube bending system with two Wafios bending heads and a Kuka twist robot is available. 1) Wafios RB20 bending head, bending direction: left and right, max. total tool height: 78 mm, bending capacity: 360 Nm, bending speed: 560°/s, bending radius: 57 mm, repeat accuracy for bending, rotation, and feed: +/-0.05 mm. 2) Kuka KR 16-2 KRC 2 robot, axes: 6, payload: 16 kg, max. reach: 1611 mm, repeat accuracy: +/-0.05 mm, weight: approx. 235 kg. Including overhead magazine, Kuka control cabinet, discharge conveyor, safety fence, mobile control panel, docking station, and work table. Documentation available. An on-site inspection is possible. Nodpowwlkiofx Abzswh

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, HYPERTURN 665 MCplus - B-PowerMill Multi-axis CNC turning center with automatic tool changer, Y-axis and B-axis, designed for complete machining of turned and milled components. Integrated spindle motors (ISM) on both main and counter spindles with thermocompensation system (liquid-cooled). Drive power: Main spindle - 29 kW Sub spindle - 22 kW Speed range: Main spindle: 0-5,000 rpm Sub spindle: 0-7,000 rpm Spindle connection (DIN 55026): Main spindle: KK 6 (bar capacity 65 mm) Sub spindle: KK 6 Y-axis: Travel range +/- 50 mm The Y-axis is constructed in such a way that the resulting cutting forces are distributed over two axes, providing extremely high rigidity for all machining operations. Njdpfxexz Ab Rj Abzowh B-PowerMill: For the machining of angular surfaces and bores, a motorized milling spindle with a 24-position tool magazine is integrated into the upper slide system. The swivel range of 210° can be infinitely adjusted and interpolated. Preloaded roller guides on all linear axes, digital drive system, integrated spindle encoder, state-of-the-art SINUMERIK 840D control including: * Hollow clamping cylinder incl. draw tube * Parts ejector and flushing through the sub spindle * 12-position radial VDI 30 turret with directional logic for up to 12 driven tool stations! Swivel speed adjustable with feed override. Performance data: Max. 6.7 kW at 2,650 rpm Constant torque 25 Nm Speed range 0-5,000 rpm - C-axis for both main and sub spindle - TRANSMIT software for easy C-axis programming * Finished parts removal device * Sinumerik 840D * Chip conveyor with programmable discharge height of 1200 mm ("hinged belt" type) * Coolant system integrated into chip conveyor 1 High-pressure pump 14 bar 1 High-pressure pump 14 bar incl. 20 µm fine filter 2 Flush pumps 3.7 bar * Electrical cabinet air-conditioning unit * Electrostatic oil mist separator * Hydraulic unit * Machine work light * Interface for foot switch * Documentation Including: - Handwheel - PC keyboard - Network interface - Tool monitoring - Turned part window - Cleaning gun - Signal lamp Year of manufacture: 2008 Machine No.: R7AW0401

Būklė: labai geros būklės (naudotas), Gamybos metai: 2019, veikimo valandos: 403 h, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 1 200 mm, veleno skylė: 120 mm, valdiklio modelis: Siemens 840 Dsl, Įranga: dokumentacija / vadovas, Technical Data: Turning length: 1200 mm Chuck diameter: 350 mm Traverse stroke X axis (up/down): 200 mm Traverse stroke Y axis: 210 mm (+130/-80) Traverse stroke Z axis: 1200 mm Maximum rapid traverse speed W/X/Y/Z (m/min): 45/40/40/46 Ball screw diameter W/X/Y/Z (mm): 40/40/40/40 Profile rail guide B/X/Y/Z (mm): 45/45/45/55 Tool swing diameter: 700 mm Maximum distance between centers: 1200 mm Main spindle / sub-spindle: Spindle bearing diameter: 120 mm / 160 mm Spindle bore: 65 / 105 mm Spindle hole diameter: 80 / 120 mm Spindle flange / spindle nose DIN 55026: A6 / A8 Drive power 100% duty cycle: 22 kW / 67.4 kW Drive power 40% duty cycle: 24 kW / 80 kW Nominal speed: 1400 rpm Max. speed: 5,700 rpm Torque 100% duty cycle: 150 Nm / 585 Nm Torque 40% duty cycle: 191 Nm / 795 Nm C-axis resolution: 0.001 degree Both turrets: Tool holder: VDI 40 Max. speed (rpm): 6,000 (torque drive), 12,000 (speed drive) Max. drive power (kW): 28.5 (torque drive), 23.5 (speed drive) Max. torque (25% duty cycle, Nm): 85 (torque drive), 56 (speed drive) Dimensions: 4,500 x 2,500 x 2,500 mm Weight approx. 16,000 kg Nedpfx Abevw Upcjzswh Control: Siemens 840 Dsl

Būklė: geras (naudotas), Gamybos metai: 1982, Funkcionalumas: visiškai funkcionalus, Equipment: 1 pincers feed (right) 1 two-point eccentric press 90 kN 3 standard slide units Nwodpfetqf Iqsx Abzjh 1 narrow slide unit 1 control shaft Working range: Wire diameter: 0.5 - 4.0 mm Strip width: up to 60 mm Feed length: up to 270 mm Capacity: up to 350 cycles/min

Būklė: naudotas, Gamybos metai: 2017, valdiklių gamintojas: Siemens, valdiklio modelis: 840Dsl, Description: Main Spindle: Technology: Motor spindle Nwjdpjy A U Izsfx Abzsh Speed: 4,000 rpm Power (max.): 29 kW Torque (max.): 250 Nm Bar capacity: 76 mm Counter Spindle: Technology: Motor spindle Speed: 5,000 rpm Power (max.): 29 kW Torque (max.): 250 Nm Parts ejector: Pneumatic Z-axis travel: 800 mm Tool Turret I (X/Y/Z): Technology: 12-station turret Tool holder: VDI30 Driven tool capacity: 5,000 rpm, 6.7 kW, 25 Nm Traverse paths in X/Y/Z: 260/100/800 mm Rapid traverse in X/Y/Z: 30/12/30 m/min Tool Turret II (X/Z): Technology: 12-station turret Tool holder: VDI30 Driven tool capacity: 5,000 rpm, 6.7 kW, 25 Nm Traverse paths in X/Z: 210/800 mm Rapid traverse in X/Z: 30 m/min Equipment/Accessories: Chip management: Chip conveyor Coolant management: High-pressure coolant system with paper band filter, 40 bar Raw material feed I: Robot interface prepared Raw material feed II: Bar loader interface prepared Finished part discharge: Workpiece pick-up device with conveyor belt Oil mist extraction: Interface prepared Tool holders: Various fixed and driven holders Additional equipment: Automatic working area door, rinse gun

Būklė: labai geros būklės (naudotas), Gamybos metai: 2007, tekėjimo ilgis: 744 mm, tekėjimo skersmuo: 430 mm, veleno greitis (maks.): 5 000 aps./min, veleno skylė: 65 mm, Control: CNC path control with 10.4" TFT color display Siemens Sinumerik 840 D powerline TECHNICAL DATA Swing diameter * Over bed: 600 mm * Over cross slide: 500 mm Distance between main spindle and sub-spindle: 975 mm Maximum turning diameter: 430 mm Maximum turning length: 744 mm Maximum bar diameter: 65 mm Maximum workpiece size with sub-spindle: ø 200 x 200 mm Main spindle Drive power: 29 kW Speed range: 0 – 5000 rpm Maximum bar capacity: 65 mm Maximum chuck size: 200 mm C-axis *Resolution: 0.001° Sub-spindle Drive power (100/40% DC): 17/22 kW Speed range: 0 – 7000 rpm Maximum chuck size: 200 mm Travel (Z-axis): 750 mm C-axis *Resolution: 0.001° Upper tool turret Disc-type turret with directional logic Number of stations: 12 Driven stations: 12 Toolholder DIN 69880: VDI 30 Drive power: 6.7 kW Speed range: 0-4000 rpm Travel range * X-axis: 270 mm * Z-axis: 750 mm * Y-axis: + 50 mm Lower tool turret Disc-type turret with directional logic Number of stations: 12 Driven stations: 12 Toolholder DIN 69880: VDI 30 Drive power: 6.7 kW Speed range: 0-4000 rpm Travel range * X-axis: 205 mm * Z-axis: 750 mm EQUIPMENT/ACCESSORIES  Full enclosure, electrically interlocked, with sliding doors and machine light  Bar feeder IEMCA Master 890 MP (left side) for bar length 3300 mm Including: guide channel, centering device, axial displacement  Thermal compensation systems for integrated spindle motors (liquid cooled)  Hollow clamping cylinder with draw tube for main spindle  Solid clamping cylinder with draw rod for sub-spindle  C-axes for main spindle and sub-spindle  Transmit software for easy C-axis programming  Y-axis on the upper turret (distribution of cutting forces over 2 axes, resulting in extremely high rigidity)  Drive units in both upper and lower turrets  Parts ejector and flushing through the sub-spindle  Parts catcher device for finished workpieces Max. finished part: ø 65 x 200 mm Max. finished part weight: 4.5 kg  Conveyor belt for removing finished parts from machine  Turret steady rest including VDI 30 base holder, centrally controlled via coolant supply (14 bar) in the tool turret Diameter range: 10 – 70 mm Njdpfxsyx U His Abzjwh  Coolant system with 2 high-pressure pumps (14 bar each) and 2 flushing pumps (3.7 bar each)  Cleaning gun for cleaning clamping devices, covers, and the entire work area with coolant  Swarf conveyor (hinged belt) in extended design for gantry system; suitable for: long steel chips, chip nests, stringy chips, dry and wet machining  Electronic oil mist separator 800 – 1000 m³/h  Automatic central oil lubrication for guideways and ball screws  Grease lubrication for main and sub-spindle  Foot switch for actuating clamping devices  HAINBUCH collet chuck size 65 for main spindle, without stop (without collets)  HAINBUCH collet chuck size 65 for sub-spindle, with stop type 100 (without collets)  3-color alarm lamp (red, green, white)  Serial interface  Mounting elements  Documentation

Būklė: labai geros būklės (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, BIHLER P-CNC 3E control system for BIHLER GRM 80E, consisting of: control cabinet complete with SIEMENS SIMODRIVE, SIEMENS motor 1PH6137-4NB 40-Z Njdpfx Abotqdb Rezowh