Ultragarsinė valymo sistema

Ultraschallreinigungsanlage BR-300 BR-300-M

Gamybos metai: 2020, Sąlyga: naujas, DESCRIPTION The so-called half-water is produced in the demineralised water station using ion exchange technology. The station consists of 3 columns: - Strongly acidic cation exchanger in the sodium cycle, - Strongly basic anion exchanger operating in the chloride cycle, Hnjdofz Nakjpfx Af Ijg - Carbon filter Our RDI-2 / RDI-4 demineralisation stations are equipped with fully automatic control heads. The columns are made of AISI316L stainless steel.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2016, Cleaning System Type W 60 C Machine body, internal piping system, control cabinet, and wash basket made of stainless steel Combination unit – rotary table washer with removable turning device and small parts basket - Basket diameter (rotary table wash basket): 600 mm - Usable internal height: 370 mm - Basket load (rotary table wash basket): 100 kg Hnjdpfx Afsq Ewgko Ijg - Usable internal height: 530 mm - Small parts basket dimensions: 375 x 220 x 200 mm Mesh size: 12 mm - Basket load (small parts basket): 20 kg Fully stainless steel construction Pump(s) and external piping/fittings designed for operation with liquids of up to 1.3 density via reinforced pump with frequency converter Chip/particle filter with tank cover plate ECO rinsing unit (reduced rinse water loss) for minimal water consumption Water supply via the operator’s mains connection with machine-integrated hot water supply Hot air drying 1 x 4 kW Oil skimmer Discharge/purge system with stainless steel pump and piping

Sąlyga: naudotas, Walther Trowal Circular Trough Vibratory Finishing Machine, Model CLS-230 Ref. No. 05.833/00 Year of manufacture: 1969 Trough diameter: 1100 mm Overall trough height: approx. 650 mm Process container / gross volume: max. 230 liters Usable volume: approx. 115 liters Speed: 1100 to 1800 rpm, infinitely variable Motor power: 7.5 kW Electrical connection: 400 Volt, 50 Hz - Operating time can be set manually or via timer - Infinitely variable motor speed via variator drive - Manually adjustable eccentric balance weights - Trough with polyurethane lining (lining partially damaged/worn) - Sound-insulated lid - Manual separation flap Hnedpfx Ajfqpxisf Ijg - Built-in screen separation device after the separation flap - Liquid connection - Material discharge opening: 180 x 150 mm - Control cabinet for wall mounting - Baffle cover with perforated screen Space requirement with base (L x W x H): 1800 x 1750 x 1700 mm Net weight: approx. 1800 kg Good condition Function description: Workpieces and abrasive media are set in motion by the generated vibration and circulated extremely gently. The continuous relative movement between the workpieces and abrasive media results in deburring and surface finishing of the workpieces.

Sąlyga: naudotas, Gamybos metai: 2002, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Space requirement approx. 3.6 / 3.5 m Photos show identical machine with centre height 225 mm Base machine: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding head UR with T1-T2-T3 Hnsdpfx Afouxfucs Iog Standard equipment: - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - B-axis infinitely variable, high-resolution - Marposs measuring system for tool measurement - Active longitudinal positioning - GAP control on T1 and T2 by ELASO, contactless integration in the control interface - Semi-automatic balancing by ELASO, integrated in the control interface - Tailstock with manual retraction - Workpiece spindle head MK5 with short taper mount DIN 55026 - Internal grinding attachment, belt driven Options available at extra cost: - New high-precision workpiece spindle head with torque drive - Internal grinding attachment for high-frequency spindles, 120 mm diameter - HF internal grinding spindle Fischer MFM-1224/42/31 D-21 - HF spindle with HSK interface, 24,000 rpm with integrated GAP sensor (lead time applies) - CNC-controlled C-axis - Non-circular (polygon) grinding - Hydrostatic lead screw in X - New hydrostatic unit with only 1 pump and accumulator for improved energy efficiency - Monitoring of water content in the hydrostatic system - Extraction system Further options available on request Mechanical overhaul: - Complete machine overhauled in accordance with Kellenberger test protocol - New easy-maintenance enclosure - New paintwork Electrical overhaul: - New, modern CNC CYLINDRICAL GRINDER CONTROL with BEMA grinding interface - Newly built control cabinet - New drive technology - Replacement of all electrical wiring, pressure switches, etc. - New absolute glass scales in X and Z axes - New absolute rotary encoder (for B-axis) Control system: The grinding software consists of a basic license and various optional modules depending on the machine’s equipment. Basic software features: - External and internal oscillation grinding - External and internal plunge grinding - External and internal face oscillation grinding - External and internal face plunge grinding - External and internal cylindrical oscillation grinding - External and internal radius grinding, radius dressed on the wheel - Semi-automatic oscillation grinding - Workpiece zero setting - Wheel zero setting - Measurement of dressing diamonds - 2 form diamonds - 1 form diamond or dressing roll (dressing roll required) - Form roll (dressing roll required) - 3 flat dressing units - Corrections - Z-position measurement (probe required) - GAP contact (touching device required) OPTIONS available at extra cost: Profile plunge grinding software: - External and internal profile plunge grinding with profile wheel Profile grinding software: - External and internal profile grinding with straight wheel Thread grinding software: - Single- and multi-start external and internal thread grinding with profile dressed on the wheel - Dressing of single- and multi-rib wheels - Flank angle freely selectable Trapezoidal thread grinding software: - Additional dressing of trapezoidal threads possible External and internal non-round plunge grinding: - External and internal non-round oscillation grinding Non-round grinding software: Precondition for non-round grinding is equipping the workpiece spindle with a high-resolution rotary encoder to enable operation as a C-axis. The non-round...

Sąlyga: geras (naudotas), Gamybos metai: 1992, mašinos/transporto priemonės numeris: 5164, Offer 23148 Technical Data: - With hydraulic clamping and feed device - Cutting range round: 320 mm - square: 300 x 300 mm - Max. cutting length per single stroke: up to 400 mm - Multiple feed up to: 10 x 400 mm - Saw blade dimensions: 3660 x 25 x 0.9 mm - Cutting speed steplessly adjustable: 20 - 100 rpm - Feed rate hydraulically steplessly adjustable Hodpsq Evn Eofx Af Iong - Coolant system - Material support height: 720 mm - Saw blade drive: - Motor: 400 V / 2.5 kW - Space requirements approx.: W 1950 x H 1250 x D 1500 mm - Weight approx.: 1000 kg

Sąlyga: labai geros būklės (naudotas), Desktop Metal 3D Printer Complete System We offer you a Desktop Metal 3D printer complete system. 3D Metal Printer Studio System from Desktop Metal Complete System: 3D Printer + Debinding Machine + Sintering Furnace Manufacturer: Desktop Metal Hnjdpsk Hz Nqsfx Af Iog Model: Desktop Metal Studio System Operating Condition: Used (Good) Year of Manufacture: 2019 Desktop Metal Studio System includes: 1.1 Desktop Metal Studio 3D Printer Bound Metal Deposition (BMD) Technology Specifications: - Printable Materials: Metal - Technology: FDM - Application: Industrial - Other Features: Suitable for office use - X-Axis Travel: 30 cm (12 in) - Y-Axis Travel: 20 cm (8 in) - Z-Axis Travel: 20 cm (8 in) Description: Unlike laser-based systems that selectively melt metal powder, this printer extrudes bound metal rods—similar to an FDM printer. This eliminates the safety requirements often associated with metal 3D printing and enables new features such as the use of closed-cell infills for lightweight yet strong parts. 1.2 Desktop Metal Studio Debinder (Delamination Machine) - Fully automatic debinding - Cleaning tank: 17.4 L (in process) / 22.5 L (storage) Description: The Debinder prepares green parts for sintering by dissolving the primary binder. With a low-emission design, it requires no external ventilation and is safe for office environments. Automatic liquid distillation and recycling means no refilling is required between cycles. 1.3 Desktop Metal Studio Sintering Furnace - Hybrid technology (microwave & conventional heating elements) - Build Volume: 305 x 205 x 205 mm - Carbon casing - Gas supply: 2 x 900 L gas bottles - Heating power: 20 kW Specifications: - Function: Sintering - Configuration: Chamber - Heat source: Gas - Other Features: High-temperature, automatic operation - Maximum temperature: 1,400°C (2,552°F) Description: Fully automated and designed to fit through an office door, the furnace provides industrial-grade sintering in an office-friendly package. Built-in, material-specific temperature profiles ensure uniform heating and cooling without the residual stresses often found in laser-based systems. Condition: Used Scope of delivery: (See images) (Subject to technical changes and errors; all information is non-binding!) For further questions, we are happy to assist you by phone.

Sąlyga: naudotas, Gamybos metai: 1999, Technical Details: X-axis travel: 3,500 mm Y-axis travel: 2,200 mm Hnodeu Nc Emjpfx Af Isg Z-axis travel: 1,200 mm C-axis: +/- 200° Control system: Heidenhain TNC 426 Spindle speed (left rotation): max. 10,000 rpm Spindle speed (right rotation): max. 10,000 rpm Distance between columns: 2,500 mm Distance spindle/table (vertical): 1,230 mm Clamping surface (table): 3,000 x 2,000 mm Table load capacity: 10 t Tool holder: HSK A 63 Feed rate X/Y/Z: max. 20 m/min Compressed air: 8 bar Total power requirement: approx. 100 kW Machine weight approx.: 40,000 kg Machine dimensions: 18.0 x 6.0 x 5.8 m 5-Axis Gantry Milling Machine Milling spindle: Manufacturer Hauser, type HS 256A-01 Uni, max. speed 10,000 rpm, direct drive Milling head: Manufacturer Hamül, fork design, integrated A-axis = swivel angle +/- 110° Tool changer: Manufacturer Hamül, rotary table type with turntable, for 32 tool positions Chip conveyors: 2 hinge belt conveyors, manufacturer DGS, with water tank, insertion length 8,500 mm Make BKW, type DL 55V-2KK, capacity 2.41 l/min; Combined oil-water cooling unit for hydraulic oil and spindle cooling Coolant system: Band filter, manufacturer DGS, type SBF 150 Operation: via control console, type Heidenhain LE 426 X, Y and Z axes equipped with Heidenhain linear scales Handheld control unit: HR 410 Hydraulic weight compensation (Z-axis) Equipment: Enclosure (protective panels with viewing windows and safety doors) Hydraulic unit Work area lighting

Sąlyga: naujas, Gamybos metai: 2026, The EVP-RA 350 vibratory finishing machine from ERBA features a rising processing bowl floor with integrated parts/media separation. It is equipped with an easily replaceable screening unit and offers high operational efficiency thanks to the integrated drop-off step. Discharge and separation are performed via the integrated flap (manual or pneumatic actuation). Upon request, the machine can be fitted with reinforced suspension and a higher-performance motor for heavier loads. The motor speed can be continuously adjusted using a frequency inverter (optional). The EVP-RA 350 can be linked with other machines thanks to its lateral discharge system. The machine is also available with a fully-automatic PLC control system (optional). ERBA vibratory finishing systems are renowned for their durability and longevity, which is largely attributed to the hot-cast polyurethane lining inside the processing bowl. Technical data: - Gross volume: 385 L - Working channel width: 340 mm - Imbalance motor power: 2.2 kW - Speed: 1,400 rpm - Internal bowl diameter: 1,200 mm All prices are net, plus the currently applicable statutory VAT and shipping costs. The images may show the machine with accessories, which are available separately at additional cost. If you are interested, we look forward to hearing from you. We would be pleased to advise you in a non-binding manner. Hnjdpfon Ut Urex Af Isg The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). This offer is intended solely as an online presentation of our products. Contract negotiations are conducted via telecommunication (email, telephone, messaging portal). Initially, you will receive a non-binding offer, which also includes information on our general terms and conditions, imprint, and cancellation policy, before any purchase or contract is concluded.

Gamybos metai: 2024, Sąlyga: naujas, mašinos/transporto priemonės numeris: SPIN500, Der Co-lead Spintrockner ist eine kompakte Gemüsesalatschleuder zur Entfernung von überschüssigem Wasser von Blattgemüse und anderen Frischprodukten. Der Korb mit dem Produkt wird in die Maschine eingesetzt, und nach dem Schließen des Deckels startet der Motor. Ein Magnet verriegelt den Deckel während des Zentrifugierens. Geeignet zum Entwässern der Oberfläche von Blattgemüse, Obst und Gemüse nach dem Schneiden. Das Gehäuse besteht aus rostfreiem Edelstahl SUS304 und zeichnet sich durch eine hochwertige Optik aus. Ausgestattet mit einem Entwässerungskorb, der das Lagern erleichtert. Die Maschine erlaubt das Einstellen von Entwässerungszeit und -geschwindigkeit, der Betrieb ist stabil. Optimal einsetzbar in allen Bereichen der Obst- und Gemüseverarbeitung sowie für den Einsatz in Großküchen und bei industriellen Caterern mit mittlerem bis hohem Bedarf an Gemüsetrocknung. * Mittels frequenzgeregelter Zentrifugation wird die Oberflächenentwässerung des Produkts durchgeführt. Hodpfsiniz Dex Af Iong * Frequenzregelungs- und optische Sensortechnologie steuern Entwässerungszeit, -geschwindigkeit sowie das automatische Ein- und Ausschalten. * Komplett zu öffnende Bauweise, erleichtert Installation und Entnahme im Produktionsprozess. * Antrieb durch frequenzgeregelten Drehstrom-Asynchronmotor (wahlweise drei- oder einphasig) sorgt für ruhigen Lauf und einfache Geschwindigkeitsanpassung.

Sąlyga: naujas, Gamybos metai: 2025, A front-opening sandblasting cabinet offers significant convenience for processing large and heavy workpieces. Telescopic cylinders installed in the doors facilitate easy opening. The sandblaster is equipped as standard with a built-in dust extraction system for material generated during sandblasting. It includes a set of nozzles, a blasting gun, and protective visor decals. Machine Description Dust-free operation is ensured by the use of perimeter seals, allowing the machine to work in an environmentally friendly manner. The sandblasting hose is located at the bottom of the collecting tank. A drainage port allows for quick changes of blasting material. The sandblaster is designed for cleaning and processing various surfaces, such as removing rust, paint, and deposits from metal surfaces, including automotive parts, engines, fittings, housings, wheels, rims, etc. Suitable abrasives include quartz, silicon carbide, glass beads, plastic abrasive, emery, and other materials. Technical Specifications KDP350TOP WORKING CAPACITY: 330 L (0.33 m³) WORKING PRESSURE: 4 – 8 bar AIR CONSUMPTION: 400 – 700 l/min AIR CONNECTION: 1/4" QUICK COUPLING VISOR AREA: 580 x 270 mm EXTRACTION CONNECTION (VENTILATION): 63 mm and 90 mm diameter INTERNAL CABINET DIMENSIONS (Width x Depth x Height, lowest/highest point): 890 x 655 x 360/610 mm OVERALL DIMENSIONS: 960 x 720 x 1500 mm WEIGHT: 64 kg Standard Equipment Cyclone extractor DC15 Work area lighting – 12 V fluorescent lamp powered by 230 V with switch 2 high-quality integrated rubber work gloves 2 extraction (vent) ports: 64 mm and 90 mm diameter for connecting extraction equipment Sandblasting gun with eight replaceable ceramic nozzles 4 replaceable protective films for window/visor Front doors with rubber perimeter seals for dust-free operation User manual in Polish Hsdpjm Ncb Eofx Af Isng Please note, the unit requires self-assembly. The listed price is NET. Transport costs are not included. For more information, please contact us by phone or email. We invite you to view our full offer on our website.