Lazerinis štampavimo presas

Trumpf TruMatic 6000

Būklė: labai geros būklės (naudotas), Trumpf We are offering a laser and punching machine for sale. Technical Specifications: Power Supply: 400V/50 Hz Fusing: 3 x 100 A Connected Load: 65 kVA Working Range X x Y (without repositioning): - Combined operation: 2585 x 1280 mm - Punching operation: 2585 x 1370 mm - Laser operation: 2585 x 1280 mm Performance: - Laser power: 2000 W - Maximum sheet thickness: 8 mm - Maximum punching force (incl. 20 kN stripper): 220 kN - Active stripper (program adjustable in stages): 4.5-20 kN - Maximum workpiece weight: 200 kg - Maximum pass-through height: - Punching: 35 mm - Laser: 22 mm Speeds: - X axis: 90 m/min - Y axis: 60 m/min Cgedezd Ulaepfx Ab Rew - Simultaneous stroke rate: - Punching: 900 strokes/min - Marking: 2800 strokes/min - C axis: - Punching: 60 rpm - Thread forming: 330 rpm Tools: - Tool stations in linear magazine: 19 (with 2 clamps) - Number of tools with multitool: 19 to 190 tools - 360° continuous rotation of all tools - Tool change time: 1.5-5 s Maximum punch diameter: - Single stroke: 76.2 mm at all tool stations - Standard Multicut: 200 mm - Maximum bending height: 25 mm - Maximum part size: 500 x 500 mm Accuracy: - Position deviation: ±0.1 mm - Mean position scatter: ±0.03 mm TRUMPF CNC Control: - Base: Siemens SINUMERIK 840D - Type: TC 6000 L 1300 Loading and dismantling must be handled by the buyer! Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors!) For further inquiries, feel free to contact us by phone.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2015, lazeri tipas: šviesolaidinis lazeris, Used laser cutting system with 8 kW fiber laser and LiftMaster Compact (Stopa version) Manufacturer: TRUMPF Model: TruLaser 5040 fiber (L69) Year of manufacture: 2015 Operating hours, approx.: 67,000 h, Laser on: 40,100 h TECHNICAL DATA: Max. material thickness: - Mild steel O₂: 25 mm - Stainless steel N₂: 40 mm - Aluminium N₂: 25 mm - Copper O₂: 10 mm - Copper N₂: 5 mm - Brass N₂: 10 mm Positioning accuracy: 0.05 mm Max. repeatability Ps max: 0.03 mm Working area: 4,000 x 2,000 mm Laser power: 8,000 Watt Standard equipment Machine: - Enclosed machine frame - Torque drive in combination with linear direct drives - Enclosed beam guidance via fiber optic cable (LLK) - Cooling unit - Machine cooling unit (water-air) - Integrated control cabinets with interior lighting - Integrated cabinet Cjdpfxjy A I Tqs Ab Rsgw - Automatic pallet changer in longitudinal direction - 19" color touchscreen - Longitudinal conveyor belt - TruDisk power supply via the machine - Work area lighting - Position laser diode - Spray device - PierceLine - FocusLine - NitroLine - PlasmaLine - Automatic nozzle cleaning - Copper cutting package (includes cutting data) - Brass cutting package (includes cutting data) - Transport and installation equipment SPECIAL EQUIPMENT: - Solid-state laser TruDisk 8001 with 1 LLK outlet - Smart Nozzle Automation (includes nozzle changer, automatic nozzle status monitoring, and smart skip) - BrightLine fiber - CoolLine (only in combination with BrightLine fiber) - DetectLine: precise sheet position recognition (incl. automatic focus measurement) - Wide transverse conveyor belt with tipping container (container to the right of the machine) - Cleaning brush - Integrated camera (Full HD) for process monitoring and single image transmission to the network (view of the first 2.5 m) - Additional 10 m extension of the LLK between laser and machine - Smart Collision Prevention (requires smart-collision-prevention plug-in for TruTops) - Pedestal machine (without steel structure) - STOFA large storage system integration (SKL or UL) - Safety equipment for storage connection incl. 2nd light barrier circuit - Storage interface (without storage cart) - LiftMaster Compact (STOPA version) TRUMPF Laser: - Solid-state laser TruDisk 8001 with one LLK outlet - Fiber optic cable as per standard layout - Laser cooling unit (water-air) - Pump diode excitation - Laser power control (The TruDisk laser is subject to international export control. According to EU Dual-Use Regulation 428/2009 (laser covered by 6A005)) Cutting head: - Universal cutting unit with fully adaptive lens system - Cutting head strategy - Protective glass against lens contamination - Condition monitoring of protective glass - ControlLine: height control and sheet outer edge detection Control system: - SINUMERIK 840D SL control - Simple shop floor programming - TruTops Laser via network access - Fast reproduction of parts - Integrated TRUMPF technology data - Auto shut-off - Programmable selection of cutting gas/pressure - ContourLine - FastLine - FlyLine - Microweld - AdjustLine - Teleservice via Internet Data transfer: - USB interface - RJ-45 network connection Safety: - CE marking - Light barriers - Multi-chamber extraction system - Compact dust extraction unit - Machine enclosure, certified viewing window, door on the right - Electric roll-up roof This used machine can be viewed under production conditions. All information is without guarantee – sale under exclusion of any warranties and guarantees. S

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2003, veikimo valandos: 53 000 h, valdymo tipas: CNC valdymas, valdiklių gamintojas: Siemens, valdiklio modelis: Sinumerik 840 D, lazeri tipas: CO₂ lazeris, lazerio galia: 3 200 W, punchingo skersmuo: 76 mm, plieno lakšto storis (maks.): 8 mm, Įranga: apsaugos šviesos užtvara, aušinimo blokas, avarinis stabdymas, dokumentacija / vadovas, dulkių šalinimas, greito keitimo įrenginys, Papildoma įranga: + 2000 metai – „TruFlow 3200“ lazeris + Smulkių detalių išpūtimo įtaisas + Sriegio formavimo funkcija su sriegio formavimo lūžio kontrole + MultiShear funkcija + Pjovimo funkcija + Žymėjimo/Greito profiliavimo funkcija + Softpunch funkcija + Pakartotinio nustatymo cilindras + Vibracijos slopinta pastatymo sistema + Drožlių transporteris su pakreipiamu konteineriu + Papildoma spaudimo apkaba Gamintojo standartinis aprašymas: Standartinė komplektacija: - „Hi-Las“ aukšto slėgio pjovimas Codpfszdc Hmox Ab Rogw - Lazerio pjovimo galva su 5'' lęšiu - Lazerio pjovimo galva su 7,5'' lęšiu - Greito pjovimo galvų keitimo sistema - programuojamas pjovimo dujų pasirinkimas / slėgio reguliavimas - talpinis aukščio reguliavimas Dias III - ContourLas funkcija - Šlako kūgio aptikimas - Kompaktiškas dulkių surinkėjas - Reservuaro šildytuvas - 18 įrankių kasečių - 18 matricų plokštelių - Automatinis įrankių keitiklis su 19 stotelių - 2 spaudimo apkabos - Visų įrankių rotacija - NC valdomi skaitmeniniai bepriežiūriai trifazio srovės pavaros - automatinis pakartotinis nustatymas - Įrankio ilgio kompensavimas - Greitas hidraulikos išjungimas - Automatinis išjungimas - 2 automatinės dalių latakai, kiekvienas dalių 500 x 500 mm - Jutikliai abiems dalių latakams - 2 dėžės gerų detalių - Išpjovimo atliekų ištraukimas - Formavimo galimybė - programuojamas štampavimo įrankių tepimas su 2 talpomis - programuojamas spaudimo elementas - adaptyvus smūgio ilgio valdymas - Saugos įrenginiai - Nuotolinės diagnostikos sistema - RJ 45 tinklo jungtis - 3,5'' diskelio įrenginys - išsamios naudojimosi instrukcijos

Būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2006, veikimo valandos: 15 000 h, perforavimo jėga: 18 t, maks. lakšto storis: 8 mm, X ašies eiga: 3 050 mm, Y ašies eiga: 1 550 mm, ruošinio svoris (maks.): 230 kg, ĮRENGINIO DUOMENYS Formatas: Didelis formatas Srovės įjungimo valandos: 15 000 val. Lazerio įjungimo valandos: 59 000 val. KOMPLEKTACIJA Sheetmaster Toolmaster Pastaba: Mašina bus prijungta prie elektros iki 2026-07-09! Toliau pateikti duomenys yra iš gamintojo duomenų lapo. Pardavėjas negarantuoja duomenų teisingumo (duomenų lapas pridėtas prie skelbimo): TECHNINĖS CHARAKTERISTIKOS X ašies eigos ilgis: 3 050 mm Y ašies eigos ilgis: 1 550 mm Maksimali lakšto storis: 8 mm Maksimali štampavimo jėga: 180 kN Cgedjza Urgspfx Ab Rew Maksimalus ruošinio svoris: 230 kg

Būklė: naudotas, Gamybos metai: 2004, x eiga 650 mm y eiga 600 mm z eiga 500 mm Valdymas: Sinumerik 840 D pl Siemens Pagrindinio veleno sūkių diapazonas: 20–28 000 min⁻¹ Pagrindinio veleno pavaros galia: 23 / 18 kW Maks. sukimo momentas: 79 Nm Įrankio tvirtinimas: HSK-A63 Stalo užspaudimo paviršius: Ø 630 mm Pasukimo kampas A: +30° / -115° Pasukamas C: 360° Maks. stalo apkrova: 500 kg Didž. ruošinio matmenys: Ø 630 x 313 mm Stalo sukimosi greitis A: 25 / C: 65 min⁻¹ Įrankių vietų skaičius: 117 vnt. Maks. įrankio skersmuo: 90 (125) mm Maks. įrankio ilgis: 300 mm Greitas eiga (X / Y / Z): 60 m/min Pagreitis: 10 m/s² Padavimo jėga: 8,5 kN Bendra galios poreikis: 43 kVA Mašinos svoris: apie 10,5 t Cgjdpoxmagzofx Ab Rew Užimamas plotas: apie 6,5 x 4,5 x 3,0 m 5 ašių CNC universali apdirbimo centras HERMLE – C 30 UP Dynamic - Padėklų keitiklis - Įrankių magazinas 117 vietų - apie 9 000 val. verpstės po pakeitimo - PASIRINKTINAI taip pat BE padėklų keitiklio

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2002, valdiklio modelis: Siemens Sinumerik 840D, lazeri tipas: CO₂ lazeris, lazerio galia: 3 200 W, perforavimo jėga: 22 t, Standard equipment: Machine - Working area 3050 x 1550 mm - Hi-Las high-pressure cutting - Laser cutting head with 5'' lens - Quick-change device for cutting head - programmable cutting gas selection/pressure setting - capacitive height control APC - Function: ContourLas - Slag cone detection - Compact dust extractor - Tank heating - Automatic tool changer with 19 stations (21 – clamping claws) - 2 clamping claws - Rotation of all tools - NC-controlled, digital, maintenance-free three-phase drives - automatic repositioning - tool length compensation - Fast hydraulic shut-off - Automatic switch-off - Automatic part sliding (each 500 x 500 mm) Cgodpfx Aeza Eyheb Rjw - Sensors for both part sliding trays - Punch slug extraction - Forming capability - programmable punch tool lubrication - programmable stripper - adaptive stroke length control - safety devices - RJ 45 network connection - 3.5'' floppy disk drive + Laser TLF 3200 + SortMaster Box incl. 4 containers + GripMaster lowerable + Scissor lift table + Repositioning cylinder + Rotoscanner + HZB SheetMaster + SortMaster Pallet + SheetMaster incl. C-frame + Modular suction plate + Additional clamping claw – total 4 pcs + Chip conveyor with tilting container + Warp detection

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2009, valdiklio modelis: Siemens Sinumerik 840D, lazeri tipas: CO₂ lazeris, lazerio galia: 3 200 W, perforavimo jėga: 22 t, Standard equipment: Machine - Working area 3050 x 1550 mm - Hi-Las high-pressure cutting - Quick-change cutting head system - Programmable cutting gas selection/pressure regulation - Capacitive height control APC - Function: ContourLas - Slag cone detection - Compact dust extractor - Tank heating Csdpfx Absza Eu Ee Rogw - Automatic tool changer with 19 stations (21 – clamping claws) - 2 clamping claws - Rotation of all tools - NC-controlled, digital, maintenance-free three-phase drives - Automatic repositioning - Tool length compensation - Fast hydraulic shut-off - Automatic switch-off - Automatic part chute each 500 x 500 mm - Sensors for both part chutes - Punch slug extraction - Forming capability - Programmable punching tool lubrication - Programmable hold-down device - Adaptive stroke length control - Safety devices - RJ 45 network connection - 3.5'' floppy disk drive + 5'' cutting head + 9'' cutting head + FocusLine + MultiTool function + Thread forming function + Marking/Fast beading function + Deburring and rolling technology function + Softpunch function + Additional clamping claw + Repositioning cylinder + Vibration-damped installation + Blow-off device for small parts + Chip conveyor with tilting container

Būklė: labai geros būklės (naudotas), Gamybos metai: 1997, Pressure: 170 t Bending length: 4080 mm Distance between uprights: 3680 mm Throat depth: 410 mm Installation height: 385 mm Cgodpfjxcp Rbsx Ab Row Stroke: 215 mm Approach speed: 200 mm/sec Working speed: 1–10 mm/sec Return speed: 135 mm/sec Table width: 200 mm Table height: 1050 mm Operating hours: 25,430 h Oil capacity: 350 l Total power requirement: 29 kVA Machine weight approx. 16,450 kg Dimensions (LxWxH): 4,620 x 2,210 x 2,885 mm The machine is in well-maintained condition. Regularly serviced by the manufacturer CNC backgauge with 8 axes (!!) - inspected condition - machine video - ?v=yEaRj0XJAC4 Equipment: - CNC electro-hydraulic press brake - DELEM CNC control – swiveling, mounted front left * High-resolution graphical display * Clear, user-friendly menus in the operator’s language * Extensive tool and product library * Graphic 2D programming * Automatic bend sequence calculation and collision detection * Emergency stop button at the front - CNC axis adjustment: * Y1 - Y2 - X1 - X2 - R1 - R2 - Z1 - Z2 axes + CNC crowning - X axis – adjustment speed: 500 mm/sec * Max. backgauge range: 860 mm - R axis – adjustment speed: 300 mm/sec * Max. travel path: 250 mm - Z axis – adjustment speed: 1,000 mm/sec * Max. travel path: 3,260 mm - CNC electro-motorized table crowning - CNC electro-pneumatic die shifting (I axis) - WILA / TRUMPF upper tool clamping – hydraulic - WILA / TRUMPF lower tool clamping – hydraulic - 2x robust, movable front support arms - 1x mobile two-hand/foot control - 1x mobile foot switch - Side safety guarding (swiveling doors) - Rear safety guarding (sliding doors) - Original operating manual

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2013, lazerio galia: 2 700 W, Maximum X working area: 2500 mm Maximum Y working area: 1250 mm Control System: Rexroth IndraMotion MTX basic version Laser Power: 2700 Watt Standard Equipment Machine - Robust, easily accessible C-frame - Precision coordinate guideway for highly accurate machining - Linear tool magazine with 23 tool stations and 2 clamps - Maintenance-free three-phase drive motors - Repositioning unit with programmable hold-down device - Foot switch for clamp closing - Alignment pin (right inner side) - Ball tables - 2 part flaps 500 x 500 mm including sensor for part drop detection - Two containers for good parts - NitroLine - Focus Line - FastLine - FlyLine - Slag cone detection - Part ejector cylinder for laser cut parts TRUMPF Laser - TruFlow 2000 laser with LensLine and optimized standby mode - High-frequency excitation - Cooling unit - Laser control system - Enclosed beam guidance - Fine filtration of compressed air for beam guidance tube ventilation Cutting Head - Lens cutting head with 170 mm focal length - Universal quick-change cutting head device UTI with bus connection - ControlLine Punching Station - Electro-hydraulic punching head - Rotatable mono-tool holder - Tool length compensation - Programmable hold-down with manually adjustable hold-down force - Stroke counter for punch and tapping operations - Spray lubrication of punch - Punch slug extraction - Calculation of fill level in the punching console - Level monitoring for thread forming and tool lubrication Control - TRUMPF control based on Rexroth IndraMotion MTX - Operator panel with 17" touch screen - Integrated technology data - Remote teleservice via Internet - Programmable cutting gas pressure - Auto shutdown including wake-up mode - Program management - Production planning Cgjdjy Saqmspfx Ab Rew Data Transfer - Network connection RJ45 and USB interface Safety - CE marking - Dual-beam light barriers - Monitoring system for gas pressure, temperature, and cooling water, among others - Emergency stop - Stray radiation protection - Compact extraction unit + Brush tables + Lowerable die + MultiTool feature + Softpunch feature + Marking feature + Chip conveyor with tilt container + Roll technology functions: knurling, deburring, seaming, offsetting, beading, cutting + Spray lubrication for die + Ejector for small parts + 1x Additional clamp + Smart Punch Monitoring (punch breakage detection) + Vibration-damped installation + Repositioning cylinder + Warping detection + Parts conveyor belt for punching area + Parts conveyor belt for laser area + GripMaster (2500x1250) + Scissor lift table + Skeleton grid pallet + SheetMaster (2500x1250) (AK04) + Peeling system + Automatic clamp closing + HZP loading/unloading + TwinCarts loading station with toothed belt drive + TwinCarts unloading station with toothed belt drive

Būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2014, lazerio galia: 3 000 W, X working area max.: 2500 mm Y working area max.: 1250 mm Control system: IndraMotion MTX Laser power: 3000 Watts Standard equipment: Machine: - Coordinate guidance for high-precision machining - Robust, easily accessible C-frame - Linear magazine with 21 tool stations and 4 clamps - Drives with maintenance-free three-phase servomotors - Repositioning device with programmable hold-down - Foot pedal for closing clamps - Ball tables - 2 parts flaps, 500 mm x 500 mm - FocusLine - NitroLine - FastLine - Ejection cylinder for laser cut parts - Slag cone detection TRUMPF Laser: - Solid-state laser TruDisk 3001 with 1 fiber output - Pump diode excitation - Fiber (LLK) according to standard layout (10m) - Laser control TruControl 1000 - Cooling unit - Laser logbook function Cutting head: - Solid-state laser compact cutting unit - ControlLine Punch head: - Electro-hydraulic punch head - Rotatable mono-tool holder - Tool length compensation - Programmable hold-down (active / passive / reposition) - Stroke counter for punches and threads - Spray lubrication for punches - Punch slug extraction - Calculation of fill level in the punch console - Level monitoring for thread forming and tool lubrication Control: - Open control based on Rexroth IndraMotion MTX - Operator panel with 17" touch display - Program management - Production planning - Integrated technology data - Remote service via internet - Programmable cutting gas pressure Cgjdpfsy Samuox Ab Rjw - Automatic shutdown with wake-up mode Data transfer: - USB interface - RJ-45 network connection Safety: - CE marking - Two-beam light barriers - Monitoring system for gas pressure, temperature, cooling water, etc. - Rapid hydraulic shutdown - Stray radiation protection - Compact dust extraction unit - MultiTool function - MultiBend function - Thread forming function - Engraving function - Deburring and rolling technology function - SoftPunch function - StripLine - Lowerable die - Spray lubrication for die incl. fill level monitoring - Additional clamp - 4 height-adjustable clamps - Vibration-damped installation - Chip conveyor with tilting container - Blowing device for small parts - Warping detection SheetMaster: - Unloading platform - Suction frame with 36 suction cups - Peeling suction cup - Vacuum sensors for each suction cup - Double-sheet detector for double-sheet control - Central lubrication - TRUMPF control based on Rexroth IndraMotion MTX - Automatic clamp closing on machine - Simultaneous loading and unloading during main time - Peeling system incl. centering aid for medium format (2500x1250) - First standard additional suction cup package - Second standard additional suction cup package - Unloading monitoring of laser parts GripMaster: - Parts conveyor belt at punch station - Parts conveyor belt at laser station ToolMaster with 70 stations (punch operation only): - Simultaneous retooling of ToolMaster during main production time

Būklė: naudotas, Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, įvesties srovės tipas: trifazis, plieno lakšto storis (maks.): 3 mm, bendras svoris: 15 000 kg, įėjimo įtampa: 400 V, Lenkimo kampas (maks.): 180 °, darbinis ilgis: 3 200 mm, darbo diapazonas: 3 200 mm, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, Technical specifications: Year: 2013 Working length: 3,200 mm Maximum sheet thickness (mild steel 400 N/mm²): 3.00 mm Maximum sheet thickness (stainless steel): 2.00 mm Maximum sheet thickness (aluminium): 4.00 mm Maximum bending height on four sides: 250 mm Upper beam stroke: 650 mm Cgedpfx Abewq Rumj Rsw

Būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2001, veikimo valandos: 13 817 h, valdiklio modelis: Siemens Sinumerik 840 D, lazerio galia: 3 200 W, perforavimo jėga: 22 t, X ašies eiga: 2 585 mm, Y ašies eiga: 1 280 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Laser power: 3,200 W Laser model: High-frequency excited CO2 laser TLF 3200W Press force: 22 t Travel distance X-axis: 2,585 mm Travel distance Y-axis: 1,280 mm MACHINE DETAILS Control model: Siemens Sinumerik 840 D Laser beam hours: 13,817 h Laser on-hours: 71,637 h Operating hours: 80,188 h EQUIPMENT Stable C-frame Coordinate guideway with integrated linear magazine Cgsdpfx Aey Iz H Isb Rsw Maintenance-free three-phase servo motors Programmable hold-down device for repositioning Sensor-monitored parts chutes 500x500mm for punching and laser station Ejector cylinder at the laser chute Programmable cutting gas pressure regulation Laser cutting head: 5'' lens, quick-change device, height control Multi-beam light barriers Hydraulic quick shut-off Exhaust system Compact dust extractor Protective device against stray radiation at the cutting head Brush table Marking function / rapid beading Softpunch Blow-out device for small parts Repositioning cylinder Warping detection Chip conveyor

Gamybos metai: 2006, veikimo valandos: 46 547 h, būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, TRUMPF TruMatic 6000 L Laser Punching Machine with TrumaLift SheetMaster, ToolMaster, GripMaster, and Scissor Lift Table. SheetMaster: Not only loads and unloads the machine, but also reliably sorts the parts. ToolMaster: Automates rapid, safe, and convenient tool changes. GripMaster: Reliably removes scrap skeletons and offcuts. Cedpfx Abon Nxw Do Rjgw TECHNICAL DETAILS Working area: 2585 x 1280 mm Control: Siemens Sinumerik 840 D Laser power: 3,200 watts Sheet thickness, mild steel: max. 8 mm Sheet thickness, stainless steel: max. 8 mm Sheet thickness, aluminium: max. 4 mm Workpiece weight: max. 200 kg Accuracy: +/- 0.1 mm Punching force: 22 t Maximum punching diameter: 76.2 mm C-axis punching: 330 rpm Stroke rate: 450 - 1000 1/min Stroke rate, marking: 2,800 1/min MACHINE DETAILS Laser on-time: 46,547 h Cutting time: 23,580 h Length: 7,500 mm Width: 8,100 mm Height: 2,400 mm Weight: 16,000 kg (base machine) Operating voltage: 400 V / 50 Hz Connected load: 76 kVA

Gamybos metai: 2002, būklė: naudotas, Diameter: 180 mm Workpiece length: 0 mm Workpiece width: 1350 mm Total power requirement: 65 kW Machine weight approx.: 7,500 kg Space requirement approx.: [to be completed] m T I M E S A V E R S (Netherlands) Wide-belt deburring and finishing grinding machine Model: 41 Series 1350 WRDOW-N Year of manufacture: 2002 Serial No.: 2313-03 --- Grinding width approx.: 1,350 mm Maximum workpiece height approx.: 1–50 mm Feed speed, stepless: approx. 1–10 m/min Comprising the following units: 1.) Vacuum table with flat workpiece feed belt, vacuum track 780 mm in the center of the belt; belt feed motor approx. 3 kW, frequency-controlled for stepless feed 1–10 m/min; tip switch for belt forward/reverse operation; digital display for belt speed and stepless table height adjustment. Suitable for wet processing. 2.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 15/19 kW, belt speed approx. 11–22 m/sec with fine height adjustment and pneumatic oscillation across the width, various grinding belts. 3.) Vertical grinding/deburring disc (disc brush system) approx. Ø 1200 mm, consisting of self-adhesive nylon fleece available in different grades, especially for deburring and cleaning surfaces and for edge rounding of workpieces. Also suitable for workpieces with varying heights. Drive approx. 7.5 kW, disc oscillates motor-driven (2.2 kW) across the entire belt width. 4.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 18.5 kW, belt speed approx. 11 m/sec with fine height adjustment and pneumatic oscillation across the width, various grinding belts. 5.) Wet processing version = complete coolant system, consisting of band filter unit with pump integrated in the machine base, rotary union at the top of the deburring disc spindle, water return through the vacuum table, as well as water mist separator mounted above the machine with blower approx. 5.3 kW. Side doors made of stainless steel sheet. Oil skimmer, etc. Cgedpfx Abst Hw Sho Rjw 6.) Side-mounted control panel with user-friendly controls and digital position and speed display. Joystick for feed belt and table adjustment, 3x ammeters, etc., as well as workpiece pressure rollers at front and rear, emergency stop. Total drive approx.: 65 kW – 400 V – 50 Hz Weight: approx. 7,500 kg Required room height: approx. 3.50 m Condition: good – powered, ready for demonstration Delivery: ex stock – as inspected Payment: strictly net – after receipt of invoice

Būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2008, veikimo valandos: 72 918 h, lazerio galia: 2 700 W, perforavimo jėga: 22 t, maks. lakšto storis: 6 mm, plieno lakšto storis (maks.): 8 mm, aliuminio lakšto storis (maks.): 4 mm, TECHNICAL DETAILS Combined Punching/Laser Operation: 2,585 x 1,650 mm Punching Operation: 3,085 x 1,740 mm Laser Operation: 3,085 x 1,650 mm Performance Laser Power: 140 – 2,700 W Maximum Sheet Thickness: 8 mm Cutting Capacity (Mild Steel): 8 mm Cutting Capacity (Aluminium): 4 mm Cutting Capacity (Stainless Steel): 6 mm Maximum Punching Force: 220 kN Active Hold-down (programmable in stages): 4.5 – 20 kN Maximum Workpiece Weight: 230 kg Speeds Max. Positioning Speed X-Axis: 90 m/min Y-Axis: 60 m/min Simultaneous (X and Y): 108 m/min Cgedpfx Aow Suwyeb Rjw C-Axis Punching: 60 rpm Thread Forming: 180 rpm Punching Stroke Rate (E = 1): 900 1/min Marking: 2,800 1/min Tooling Linear Magazine: 18 tools with 3 clamps Tool Change Time: 1.5 – 5 s Accuracy Position Deviation: ±0.10 mm Mean Position Scatter: ±0.03 mm Programmable Chutes for Punched and Laser Parts (max.) Size: 500 x 500 mm TRUMPF CNC Control: Siemens Sinumerik 840D (basic) MACHINE DETAILS Laser On-Time: 72,918 h Cutting Time: 18,536 h Space Requirement (W x L): 7,900 x 9,100 mm Height: 2,400 mm Weight: 22,500 kg Laser Gas Consumption CO2 / N2 / He: 1 / 6 / 13 l/h Connected Load: 73 kVA