CNC tekinimo-frezavimo centras

Traub TNC65DGY

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1996, veikimo valandos: 46 282 h, greitas poslinkis X ašimi: 15 m/min, greitas poslinkis Y ašis: 15 m/min, greitasis eiga Z ašyje: 15 m/min, bendras aukštis: 2 600 mm, bendras ilgis: 11 000 mm, bendras plotis: 2 000 mm, bendras svoris: 6 000 kg, valdiklių gamintojas: TRAUB, valdiklio modelis: TX 8F, priešpriešinio veleno didžiausias greitis: 4 000 aps./min, įrankių magazino lizdų skaičius: 10, - Includes two 10-position tool turrets with live tooling stations - Includes HAINBUCH chucking system - Includes sub-spindle, bar feeder (manufacturer: STAMAG) - Includes chip conveyor TECHNICAL DATA: - Operating voltage: 400 V - Frequency: 50 Hz - Control voltage: 230 V - Rated current: 85 A - Connection: 54 kW - Connected load: 39 kW - Noise emission at operator station: 71 dB(A) Ambient conditions: - Temperature: 5 – 40°C - Humidity: max. 70% - Workpiece discharge via sub-spindle - Max. sub-spindle speed: 4000 rpm - Max. workpiece diameter: 56 mm - Programming: EIA and ISO code Input/output resolution: - X/Z: 0.001 mm - C-axis: 0.001° - Rapid traverse: max. 15 m/min Iedpfowpa Ruox Afwea - Fine interpolation cycle: 0.34 ms - Max. thread pitch: 999.999 mm - Max. radius: 99,999.999 mm - Feed override: 0…200% - Rapid traverse override: 0…100% - Spindle speed override: 50…120% - Spindle speed input: 5 digits - Cutting speed input: 4 digits - Tool input: 4 digits - Program number: 8 digits - Subprogram number: 8 digits - Block number: 4 digits - M-codes: 3 digits - B-codes: 6 digits - Memory capacity: 32,000 characters - Tool offset pairs: 40 CNC TURNING AND POSITIONING UNIT (C-AXIS): Main spindle: - Max. speed: 80 rpm - Torque at 100% duty cycle: 100 Nm - Accuracy: +/- 3 minutes Sub-spindle: - Max. speed: 80 rpm - Torque at 100% duty cycle: 30 Nm - Accuracy: +/- 3 minutes TOOL CARRIERS 1 & 2: - Driven tools per tool carrier: 10 (14) - Max. speed: 4000 (8000) - Power at 100% duty cycle: 1.5 kW - Power at 15% duty cycle: 4 kW - Torque at 15% duty cycle: 12.4 (4) Nm - Tool holder/tool carrier positions: 10 (14) - Cylindrical shank per DIN 69880: Ø 30 x 55 (25 x 48) mm - Tool cross-section: 20 x 20 (16 x 16) mm - Chip-to-chip time (per VDI 2852): 1.2 s - Index time per station: 0.6 s - Over 5 stations: 1.5 s SUB-SPINDLE (NUMERICALLY CONTROLLED IN Z-AXIS): - Max. speed: 4000 rpm - Max. clamping diameter: 65 mm - Infinitely variable 3-phase motor: 11 kW - Torque: 210 Nm - Feed force at 100% duty cycle: 6000 N - Feed travel: 520 mm - Ball screw drive: Ø 32 x 10 mm HYDRAULICS: - System pressure: 60 bar - Tank capacity: 150 l COOLANT SYSTEM: - Per tool carrier: Single-stage centrifugal pump - Pump pressure: 5/12 bar - Tank capacity: - without chip conveyor: 300 l - with chip conveyor: 280 l NOTE: Due to occasional usage, operating hours may vary slightly.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2017, Allgemeine Daten Isdew S N Igepfx Afwsa Maße Breite 3000 mm Maße Tiefe 2300 mm Maße Höhe 2700 mm Maschinengewicht 9600 kg Steuerungseinheit Hersteller HEIDENHAIN Modell TNC 640 Hauptantrieb Anzahl Spindeln 1 Drehzahlbereich Spindel 20000 1/min Werkzeugaufnahme SK40 Anzahl Achsen 5 Verfahrwege X-Achse 600 mm Y-Achse 500 mm Z-Achse 500 mm Medien Späneförderer Ja Zusatzausstattung Späneförderer, Kühlsystem, Werkzeugkettenmagazin, Innenkühlung, erweiterte Spülung, drehbares Sichtfenster, Nebelabscheider, Blasluft, optische Messsonde, Werkzeugbruchkontrolle, Spülpistole, 3D-Steuerung, NC-Schwenkrundtisch, Vorbereitung für Handhabungssystem, Signalleuchte, elektronisches Handrad, Anzeige Optionales Zubehör zum Verkauf: 48 x Aluminium-Spannplatten (Eigenbau); 48 x Maschinenschraubstöcke HSG5 von Ceratizit (WNT); 5 x Regale (Eigenbau); Werkzeuge und Halter Diese 5-Achs-Bearbeitungszentrum DMG MORI DMU 60 EVO wurde 2016 gebaut. Ausgestattet mit der Heidenhain iTNC 640 Steuerung, einer Spindeldrehzahl von 20000 1/min und 120-fach Werkzeugwechsler. Die Maschine verfügt über einen Späneförderer, ein Kühlsystem sowie eine interne Kühlmittelversorgung mit 40 bar. Die DMU 60 EVO ist ideal für komplexe Bearbeitungsaufgaben und stellt eine robuste Ergänzung für jede Werkstatt dar. Für weitere Informationen zu diesem vertikalen Bearbeitungszentrum kontaktieren Sie uns bitte. Anwendungsgebiete Fräsen

Sąlyga: naudotas, Gamybos metai: 2004, valdiklių gamintojas: Mitsubishi, valdiklio modelis: TX-8i, ----- Description: Ijdpfoxhbfnsx Afwja Main Spindle: Technology: Belt-driven spindle Speed: 4,000 rpm Power: 18.5 kW Torque: 230 Nm Bar capacity: 65 mm Workpiece clamping: Collet chuck, Hainbuch Spanntop size 65 Counter Spindle: Technology: Belt-driven spindle Speed: 4,000 rpm Power: 11 kW Torque: 210 Nm Workpiece clamping: Collet chuck, Hainbuch Spanntop size 65 Ejector: Hydraulic with flushing Z-axis travel: 520 mm Rapid traverse in Z: 30 m/min Tool Turret I (X/Y/Z): Technology: Turret with 10 stations Tool interface: VDI30 Driven tools: 4,000 rpm, 4 kW, 16 Nm Travel in X/Y/Z: 140/70/450 mm Rapid traverse in X/Y/Z: 15/6/30 m/min Tool Turret II (X/Z): Technology: Turret with 10 stations Tool interface: VDI30 Driven tools: 4,000 rpm, 4 kW, 16 Nm Travel in X/Z: 140/450 mm Rapid traverse in X/Z: 15/30 m/min Equipment/Accessories: Chip management: Chip conveyor Coolant management: Coolant system with paper band filter Raw material loading: Short bar loader, FMB SL80S Finished parts unloading: Hydraulic parts gripper with conveyor belt Oil mist extraction: Electrostatic separator, LTA AC3001 Additional equipment: Various tool holders, rinse gun

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1996, veikimo valandos: 38 433 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 489, Strypo skersmuo (maks.): 65 mm, valdiklio modelis: TRAUB TX8F, juostos ilgis: 3 000 mm, ašių skaičius: 7, Įranga: drožlių transporteris, strypų padavėjas, CNC tekinimo automatas su septyniomis ašimis bei pagrindiniu ir priešpriešiniu špindeliais! TECHNINĖS DETALĖS Ašys ir špindeliai Ašių skaičius: 7 Pagrindinis špindelis: yra Priešpriešinis špindelis: yra Revolverių skaičius: 2 C ašys: 2 Y ašis: 1 Valdymas: TRAUB TX8F STAKLIŲ DETALĖS Darbo valandos: 38 433 val. ĮRANGA Stamag DN61 strypų padavėjas (strypo skersmuo 65 mm, strypo ilgis 3 m) Aušinimo sistema Detalių išvedimas Drožlių transporteris Oro filtras Iodpfxow Uikto Afwoa

Sąlyga: naudotas, Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 300 mm, sukimosi skersmuo virš skersinio stumduko: 20 mm, tekėjimo skersmuo: 20 mm, veleno greitis (min.): 10 000 aps./min, veleno greitis (maks.): 10 000 aps./min, veleno skylė: 20 mm, sukimosi greitis (maks.): 10 000 aps./min, galia: 30 kW (40,79 AG), Centrum tokarsko-frezarskie kompletne z podajnikiem prętów LNS HYDROBAR MINI SPRINT (maksymalna długość pręta 3 000 mm) DMG MORI SPRINT 20-8 Sterowanie: Fanuc 310i Główny wrzecion Obroty: 10 000 obr./min Moc: 5,5 kW Moment obrotowy: 14 Nm Przelot pręta: max. 20 mm Oś C1: 0,001 Przesuw osi Z1: 80 mm Wrzeciono przeciwległe Obroty: 10 000 obr./min Moc: 5,5 kW Moment obrotowy: 14 Nm Oś C2: 0,001 Przesuw osi X2 / Z2: 240 / 300 mm Posuw szybki osi X2 / Z2: 40 m/min Nośnik narzędzi I (X/Y) Technologia: suwak liniowy Obróbka wewnętrzna: 6 stanowisk Uchwyt narzędzia: 20 mm Obróbka zewnętrzna: 6 stanowisk Uchwyt narzędzia: 12 x 12 mm Stanowiska narzędzi napędzanych: 5 Napęd narzędzi: 3 450 / 6 000 obr./min Iedpfxoq Nmm Es Afwoa Uchwyt narzędzia: tuleja zaciskowa ESX 16 Przesuw osi X/Y: 50 / 350 mm Posuw szybki osi X/Y: 40 / 30 m/min Nośnik narzędzi II (Y) Technologia: suwak liniowy Obróbka wewnętrzna: 4 stanowiska Uchwyt narzędzia: 20 mm Obróbka zewnętrzna: 4 stanowiska Uchwyt narzędzia: 12 x 12 mm Stanowiska narzędzi napędzanych: 5 Napęd narzędzi: 3 450 / 6 000 obr./min Uchwyt narzędzia: tuleja zaciskowa ESX 16 Przesuw osi Y2: 120 mm Posuw szybki osi Y2: 40 m/min DANE TECHNICZNE Waga: 4 200 kg Pobór mocy: 30 kVA Napięcie robocze: 400 V / 50 Hz WYPOSAŻENIE Odprowadzanie wiórów: transporter wiórów System chłodzenia: pompa chłodziwa System gaśniczy: Kraft + Bauer Odciąg mgły olejowej: przygotowane przyłącze Dodatkowe wyposażenie: lampa sygnalizacyjna

Gamybos metai: 1996, Sąlyga: paruoštas naudoti (naudotas), Turning length: 450 mm, spindle bore: 65 mm, spindle speed: 4000 rpm, main spindle/subspindle power: 18.5 kW / 11 kW, tool stations: 10, live tools: 10, hydraulic capacity: 150 l, hydraulic pressure: 60 bar, total connected load: 39 kW. Rapid traverse X1/X2: 15 m/min, feed force: 5000 N, feed travel: 140 mm. Rapid traverse Z1/Z2: 30 m/min, feed force: 8000 N, feed travel: 450 mm. Rapid traverse Y1: 6 m/min, feed force: 8000 N, feed travel: +/-35 mm. Machine dimensions X/Y/Z: approx. 4150 mm / 2000 mm / 1800 mm, weight: approx. 4750 kg, control: Traub System TX 8F, operating hours: 78,825 h. Documentation available. An on-site inspection is possible. Isdpfx Aov Scrhofwoa

Sąlyga: nepatikrintas (naudotas), Gamybos metai: 1996, veikimo valandos: 46 282 h, Funkcionalumas: nepatikrintas, mašinos/transporto priemonės numeris: 18770, valdiklio modelis: TX 8F, spaustuvo skersmuo: 65 mm, priešpriešinio veleno didžiausias greitis: 4 000 aps./min, ruošinio skersmuo (maks.): 56 mm, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20.11.2025! Placing a bid constitutes a binding commitment to collect the machine between 01.12.2025 and 05.12.2025! TECHNICAL DETAILS Max. workpiece diameter: 56 mm Max. clamping diameter: 65 mm Max. speed of counter spindle: 4,000 rpm Counter spindle power: 11 kW Constant power range (counter spindle): 1:8 Counter spindle torque: 210 Nm Tool drive Max. tool drive speed: 4,000 rpm Tool drive power at 100% duty cycle: 1.5 kW Tool drive power at 15% duty cycle: 4 kW Tool drive torque at 15% duty cycle: 12.4 Nm (4 Nm) Number of tool stations: 10 (14) Cylindrical tool mount: ∅ 30 x 55 mm (25 x 48 mm) Chisel cross-section: 20 x 20 mm (16 x 16 mm) Chip-to-chip time: 1.2 s Indexing time for one station: 0.6 s Indexing time for 5 stations: 1.5 s Input and output resolution X/Z: 0.001 mm Input and output resolution C-axis: 0.001° Fine interpolation cycle: 0.34 ms Max. thread pitch: 999,999 mm Max. radius: 99,999.999 mm Max. speed (C-axis): 80 rpm Torque (main spindle C-axis) at 100% duty cycle: 100 Nm Accuracy (main spindle and counter spindle C-axis): ± 3 min Rapid traverse and feed rate: 30,000 mm/min Rapid traverse: max. 15 m/min Feed force at 100% duty cycle: 6,000 N Feed travel: 520 mm Ball screw (∅ x pitch): 32 x 10 mm Feed override: 0 – 200% Rapid traverse override: 0 – 100% Spindle speed override: 50 – 120% MACHINE DETAILS Control system: TX 8F Dimensions & Weight Dimensions (L x W x H): 11,000 x 2,000 x 2,600 mm Weight: 6,000 kg Electrical Data Operating voltage: 400 V Frequency: 50 Hz Control voltage: 230 V Rated current: 85 A Connection: 54 kW Connected load: 39 kW Noise emission at operator's position: 71 dB(A) Ambient temperature range: 5 – 40°C Max. humidity: 70% System pressure (hydraulics): 60 bar Hydraulic tank capacity: 150 l Coolant pump pressure: 5/12 bar Tank capacity without chip conveyor: 300 l Tank capacity with chip conveyor: 280 l Input Spindle speed input: 5 digits Cutting speed input: 4 digits Tool input: 4 digits Program number: 8 digits Subprogram number: 8 digits Iodexpgl Ajpfx Afwea Block number: 4 digits M-codes: 3 digits B-codes: 6 digits Memory capacity: 32,000 characters Operating hours: 46,282 h (as of 17.10.2025) EQUIPMENT Two 10-position tool turrets with driven tool stations HAINBUCH chuck system Counter spindle Bar feeder by STAMAG Chip conveyor

Sąlyga: naudotas, TECHNICAL DATA - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 32 [mm] - Max. machinable length: 320 [mm] - Spindle speed: 8,000 [rpm] - Spindle drive power: 3.7 / 5.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Max. bar diameter: 32 [mm] - Spindle speed: 8,000 [rpm] - Spindle drive power: 2.2 / 3.7 [kW] - Minimum C-axis resolution: 0.001 [degrees] TOOL HOLDER 1 - Number of positions: 9 - Number of driven positions: 4 - Driven tool speed: 6,000 (T01-T02-T03) / 4,000 (T04) [rpm] - Driven tool power: 1 [kW] - Travel X/Y: 142 / 348 [mm] TOOL HOLDER 2 - Number of positions: 3 TOOL HOLDER WITH B-AXIS - Number of positions: 8 - Number of driven positions: 4 - Driven tool speed: 5,000 [rpm] - Driven tool power: 1 [kW] - B-axis travel: 0 - 135 [degrees] SUBSEQUENT MACHINING (COUNTER OPERATION) - Number of positions: 8 - Number of driven positions: 4 - Driven tool speed: 6,000 [rpm] - Driven tool power: 1 [kW] FRONT DEVICE - Number of positions: 2 - Number of driven positions: 2 - Driven tool speed: 8,000 [rpm] - Driven tool power: 1 [kW] ELECTRICAL SUPPLY Iedpfx Aowdalnjfwja - Total power requirement: 21 [kVA] WEIGHT AND DIMENSIONS - Floor space required: 2,150 x 1,280 [mm] - Machine height: 2,010 [mm] - Machine weight: 3,600 [kg] MACHINE HOURS - Power-on hours: 37,855 [h] - Operating hours: 9,578 [h] ACCESSORIES - Control: Fanuc 31i-B5 - Interface: RS232 / PCMCIA / RJ45 / USB - Driven guide bushing - Part extraction - Part ejector - Part conveyor belt - Chip conveyor - Coolant tank: MULLER COMBILOOP CL2 * with high-pressure pump: 100 [bar] - Bar feeder: IEMCA BOSS 338 HD / 32 LL - Electrical transformer

Gamybos metai: 2015, Sąlyga: paruoštas naudoti (naudotas), A Traub CNC twin-spindle lathe, completely overhauled in 2025, is available. Turning length: 450 mm, spindle bore: 65 mm, spindle speed: 4000 rpm, main spindle/sub spindle power: 18.5 kW/11 kW, tool stations: 10, driven tools: 10, hydraulic capacity: 150 l, hydraulic pressure: 60 bar, connected load: 39 kW. Rapid traverse X1/X2: 15 m/min, feed force: 5000 N, feed travel: 140 mm. Rapid traverse Z1/Z2: 30 m/min, feed force: 8000 N, feed travel: 450 mm. Rapid traverse Y1: 6 m/min, feed force: 8000 N, feed travel: +/-35 mm. Machine dimensions X/Y/Z: approx. 4150 mm/2000 mm/1800 mm, weight: approx. 4,750 kg, control: Traub System TX 8F, operating hours: 12,938 h. Includes chip conveyor and LNS Quick Load bar feeder. Documentation is available. On-site inspection possible. Iedpfx Asv Scrbsfwja

Sąlyga: geras (naudotas), Gamybos metai: 2007, - SIEMENS 840 D control system - Bar passage: 65 mm - Main and sub-spindle, max. speed 5,000 rpm - C-axis, Y-axis - 3 turrets with 12 stations each (all driven) - Driven tool speed: 4,000 rpm Isdpfouw Izvsx Afwoa - Tool holder: VDI 30 with drive DIN 5480 TRAVEL PATHS X1 = 165 mm, Z1 = 220 mm X2 = 165 mm, Z2 = 150 mm X3 = 165 mm, Z3 = 650 mm, Y3 = 80 mm (+50/-30) ACCESSORIES Coolant system Chip conveyor Bar loader TOP Automazioni XF 375