CNC tekinimo staklės

TRAUB TNC 65

Sąlyga: geras (naudotas), Gamybos metai: 2001, Ref. No.: 10551 Manufacturer: TRAUB Model: TNC 42/65 Year of manufacture: 2001 Control type: CNC Control system: TRAUB TX Location: Halberstadt Country of origin: Germany Machine No.: 93XXXXX Spindle speed: 8000 rpm X-axis travel: 450 mm Turning length: 450 mm Spindle speeds: 4000 rpm Clamping diameter: 42 / 65 mm Spindle diameter at front bearing: 110 mm Tool mount: 14 Max. torque: 170 / 230 Nm Rapid traverse speed X-axis: 15 m/min Rapid traverse speed Y-axis: 6 m/min Rapid traverse speed Z-axis: 30 m/min Space requirement (LxWxH): 4354 x 2076 x 1917 mm Tool slide cross-section, turning and milling support: 16 x16 (20 x20) mm Pressure: 70 bar Hydraulic tank capacity: 70 l Total power requirement: 39 kVA Approx. machine weight: 5.2 t Feed force X-axis at 100% duty cycle: 5000 N X-axis feed travel: 140 mm Z-axis feed travel: 450 mm Y-axis feed travel: 35 mm Ball screw Z-axis (Ø x pitch): 32 x 10 mm Kodpfoxxpbrsx Aazjdw Ball screw X-axis (Ø x pitch): 32 x 5 mm Ball screw Y-axis (Ø x pitch): 25 x 5 mm Additional Information: - Turret 1, number of stations: 10 - Turret 2, number of stations: 14 - Hecowpkfie Htlx Tfefh - Driven tools: Yes

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1996, veikimo valandos: 46 282 h, greitas poslinkis X ašimi: 15 m/min, greitas poslinkis Y ašis: 15 m/min, greitasis eiga Z ašyje: 15 m/min, bendras aukštis: 2 600 mm, bendras ilgis: 11 000 mm, bendras plotis: 2 000 mm, bendras svoris: 6 000 kg, valdiklių gamintojas: TRAUB, valdiklio modelis: TX 8F, priešpriešinio veleno didžiausias greitis: 4 000 aps./min, įrankių magazino lizdų skaičius: 10, - Includes two 10-position tool turrets with live tooling stations - Includes HAINBUCH chucking system - Includes sub-spindle, bar feeder (manufacturer: STAMAG) - Includes chip conveyor TECHNICAL DATA: Kdodpjwpa Ruefx Aazjw - Operating voltage: 400 V - Frequency: 50 Hz - Control voltage: 230 V - Rated current: 85 A - Connection: 54 kW - Connected load: 39 kW - Noise emission at operator station: 71 dB(A) Ambient conditions: - Temperature: 5 – 40°C - Humidity: max. 70% - Workpiece discharge via sub-spindle - Max. sub-spindle speed: 4000 rpm - Max. workpiece diameter: 56 mm - Programming: EIA and ISO code Input/output resolution: - X/Z: 0.001 mm - C-axis: 0.001° - Rapid traverse: max. 15 m/min - Fine interpolation cycle: 0.34 ms - Max. thread pitch: 999.999 mm - Max. radius: 99,999.999 mm - Feed override: 0…200% - Rapid traverse override: 0…100% - Spindle speed override: 50…120% - Spindle speed input: 5 digits - Cutting speed input: 4 digits - Tool input: 4 digits - Program number: 8 digits - Subprogram number: 8 digits - Block number: 4 digits - M-codes: 3 digits - B-codes: 6 digits - Memory capacity: 32,000 characters - Tool offset pairs: 40 CNC TURNING AND POSITIONING UNIT (C-AXIS): Main spindle: - Max. speed: 80 rpm - Torque at 100% duty cycle: 100 Nm - Accuracy: +/- 3 minutes Sub-spindle: - Max. speed: 80 rpm - Torque at 100% duty cycle: 30 Nm - Accuracy: +/- 3 minutes TOOL CARRIERS 1 & 2: - Driven tools per tool carrier: 10 (14) - Max. speed: 4000 (8000) - Power at 100% duty cycle: 1.5 kW - Power at 15% duty cycle: 4 kW - Torque at 15% duty cycle: 12.4 (4) Nm - Tool holder/tool carrier positions: 10 (14) - Cylindrical shank per DIN 69880: Ø 30 x 55 (25 x 48) mm - Tool cross-section: 20 x 20 (16 x 16) mm - Chip-to-chip time (per VDI 2852): 1.2 s - Index time per station: 0.6 s - Over 5 stations: 1.5 s SUB-SPINDLE (NUMERICALLY CONTROLLED IN Z-AXIS): - Max. speed: 4000 rpm - Max. clamping diameter: 65 mm - Infinitely variable 3-phase motor: 11 kW - Torque: 210 Nm - Feed force at 100% duty cycle: 6000 N - Feed travel: 520 mm - Ball screw drive: Ø 32 x 10 mm HYDRAULICS: - System pressure: 60 bar - Tank capacity: 150 l COOLANT SYSTEM: - Per tool carrier: Single-stage centrifugal pump - Pump pressure: 5/12 bar - Tank capacity: - without chip conveyor: 300 l - with chip conveyor: 280 l NOTE: Due to occasional usage, operating hours may vary slightly.

Sąlyga: naudotas, Gamybos metai: 2004, valdiklių gamintojas: Mitsubishi, valdiklio modelis: TX-8i, ----- Description: Main Spindle: Technology: Belt-driven spindle Speed: 4,000 rpm Power: 18.5 kW Torque: 230 Nm Bar capacity: 65 mm Workpiece clamping: Collet chuck, Hainbuch Spanntop size 65 Counter Spindle: Technology: Belt-driven spindle Speed: 4,000 rpm Power: 11 kW Torque: 210 Nm Workpiece clamping: Collet chuck, Hainbuch Spanntop size 65 Ejector: Hydraulic with flushing Kodpfjxhbfnex Aazedw Z-axis travel: 520 mm Rapid traverse in Z: 30 m/min Tool Turret I (X/Y/Z): Technology: Turret with 10 stations Tool interface: VDI30 Driven tools: 4,000 rpm, 4 kW, 16 Nm Travel in X/Y/Z: 140/70/450 mm Rapid traverse in X/Y/Z: 15/6/30 m/min Tool Turret II (X/Z): Technology: Turret with 10 stations Tool interface: VDI30 Driven tools: 4,000 rpm, 4 kW, 16 Nm Travel in X/Z: 140/450 mm Rapid traverse in X/Z: 15/30 m/min Equipment/Accessories: Chip management: Chip conveyor Coolant management: Coolant system with paper band filter Raw material loading: Short bar loader, FMB SL80S Finished parts unloading: Hydraulic parts gripper with conveyor belt Oil mist extraction: Electrostatic separator, LTA AC3001 Additional equipment: Various tool holders, rinse gun

Sąlyga: naudotas, Gamybos metai: 1996, Maks. strypo skersmuo: 65 mm Maks. tekinimo skersmuo: 175 mm Maks. strypo ilgis: 3.000 mm Valdymas: Sistema TX 8F Eigos kelias - x: 140 mm Kdsdpfx Asxbtq Noazsw Eigos kelias - z: 520 mm CNC tekinimo staklės | TRAUB - TNC 42/65 DG su strypų padavėju. Staklės yra gerai prižiūrėtos, jas galima apžiūrėti prijungtas prie elektros bet kuriuo metu. Staklių darbo vaizdo įrašus iš gamyklos vietos atsiųsime pagal pageidavimą. Techniniai staklių duomenys bus pateikti netrukus. Dėkojame už supratingumą!

Gamybos metai: 1996, Sąlyga: paruoštas naudoti (naudotas), Turning length: 450 mm, spindle bore: 65 mm, spindle speed: 4000 rpm, main spindle/subspindle power: 18.5 kW / 11 kW, tool stations: 10, live tools: 10, hydraulic capacity: 150 l, hydraulic pressure: 60 bar, total connected load: 39 kW. Rapid traverse X1/X2: 15 m/min, feed force: 5000 N, feed travel: 140 mm. Rapid traverse Z1/Z2: 30 m/min, feed force: 8000 N, feed travel: 450 mm. Rapid traverse Y1: 6 m/min, feed force: 8000 N, feed travel: +/-35 mm. Machine dimensions X/Y/Z: approx. 4150 mm / 2000 mm / 1800 mm, weight: approx. 4750 kg, control: Traub System TX 8F, operating hours: 78,825 h. Documentation available. An on-site inspection is possible. Kdsdpfxsv Scrhe Aazsw

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, Traub CNC Lathe TNC65DGY, TX8I, Year 2005, Serial No. 1130 Description Y-axis on S1, V-axis, 2x C-axis, 2x powered tool drives, 2 turrets VDI30, Hainbuch BZI65 on main and counter spindle, part gripper, bar loader Iemca Master 880MP-E. Kdsdpewi I Eyofx Aazow Condition Very well maintained, good condition, serviced. Machine geometry has been checked and adjusted/set up. The machine can be inspected under power – video also available. Warranty 6 months on main components as follows: Spindle bearings, ball screws, linear guides, clamping cylinders. The warranty expressly applies only to the spare parts, not for downtime or labor hours, travel time. The warranty expressly does not cover any parts other than those mentioned above, e.g. wear parts, electrics, electronics, hydraulics, etc.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1996, veikimo valandos: 38 433 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 489, Strypo skersmuo (maks.): 65 mm, valdiklio modelis: TRAUB TX8F, juostos ilgis: 3 000 mm, ašių skaičius: 7, Įranga: drožlių transporteris, strypų padavėjas, CNC tekinimo automatas su septyniomis ašimis bei pagrindiniu ir priešpriešiniu špindeliais! TECHNINĖS DETALĖS Ašys ir špindeliai Ašių skaičius: 7 Pagrindinis špindelis: yra Priešpriešinis špindelis: yra Revolverių skaičius: 2 C ašys: 2 Y ašis: 1 Valdymas: TRAUB TX8F STAKLIŲ DETALĖS Darbo valandos: 38 433 val. ĮRANGA Stamag DN61 strypų padavėjas (strypo skersmuo 65 mm, strypo ilgis 3 m) Aušinimo sistema Detalių išvedimas Drožlių transporteris Ksdew Uiktspfx Aazsdw Oro filtras

Sąlyga: nepatikrintas (naudotas), Gamybos metai: 1996, veikimo valandos: 46 282 h, Funkcionalumas: nepatikrintas, mašinos/transporto priemonės numeris: 18770, valdiklio modelis: TX 8F, spaustuvo skersmuo: 65 mm, priešpriešinio veleno didžiausias greitis: 4 000 aps./min, ruošinio skersmuo (maks.): 56 mm, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20.11.2025! Placing a bid constitutes a binding commitment to collect the machine between 01.12.2025 and 05.12.2025! TECHNICAL DETAILS Max. workpiece diameter: 56 mm Max. clamping diameter: 65 mm Max. speed of counter spindle: 4,000 rpm Counter spindle power: 11 kW Constant power range (counter spindle): 1:8 Counter spindle torque: 210 Nm Tool drive Max. tool drive speed: 4,000 rpm Tool drive power at 100% duty cycle: 1.5 kW Tool drive power at 15% duty cycle: 4 kW Tool drive torque at 15% duty cycle: 12.4 Nm (4 Nm) Number of tool stations: 10 (14) Cylindrical tool mount: ∅ 30 x 55 mm (25 x 48 mm) Chisel cross-section: 20 x 20 mm (16 x 16 mm) Chip-to-chip time: 1.2 s Indexing time for one station: 0.6 s Indexing time for 5 stations: 1.5 s Input and output resolution X/Z: 0.001 mm Input and output resolution C-axis: 0.001° Fine interpolation cycle: 0.34 ms Max. thread pitch: 999,999 mm Max. radius: 99,999.999 mm Max. speed (C-axis): 80 rpm Torque (main spindle C-axis) at 100% duty cycle: 100 Nm Accuracy (main spindle and counter spindle C-axis): ± 3 min Rapid traverse and feed rate: 30,000 mm/min Rapid traverse: max. 15 m/min Kdjdoxpgl Aspfx Aazsw Feed force at 100% duty cycle: 6,000 N Feed travel: 520 mm Ball screw (∅ x pitch): 32 x 10 mm Feed override: 0 – 200% Rapid traverse override: 0 – 100% Spindle speed override: 50 – 120% MACHINE DETAILS Control system: TX 8F Dimensions & Weight Dimensions (L x W x H): 11,000 x 2,000 x 2,600 mm Weight: 6,000 kg Electrical Data Operating voltage: 400 V Frequency: 50 Hz Control voltage: 230 V Rated current: 85 A Connection: 54 kW Connected load: 39 kW Noise emission at operator's position: 71 dB(A) Ambient temperature range: 5 – 40°C Max. humidity: 70% System pressure (hydraulics): 60 bar Hydraulic tank capacity: 150 l Coolant pump pressure: 5/12 bar Tank capacity without chip conveyor: 300 l Tank capacity with chip conveyor: 280 l Input Spindle speed input: 5 digits Cutting speed input: 4 digits Tool input: 4 digits Program number: 8 digits Subprogram number: 8 digits Block number: 4 digits M-codes: 3 digits B-codes: 6 digits Memory capacity: 32,000 characters Operating hours: 46,282 h (as of 17.10.2025) EQUIPMENT Two 10-position tool turrets with driven tool stations HAINBUCH chuck system Counter spindle Bar feeder by STAMAG Chip conveyor

Gamybos metai: 2015, Sąlyga: paruoštas naudoti (naudotas), A Traub CNC twin-spindle lathe, completely overhauled in 2025, is available. Turning length: 450 mm, spindle bore: 65 mm, spindle speed: 4000 rpm, main spindle/sub spindle power: 18.5 kW/11 kW, tool stations: 10, driven tools: 10, hydraulic capacity: 150 l, hydraulic pressure: 60 bar, connected load: 39 kW. Rapid traverse X1/X2: 15 m/min, feed force: 5000 N, feed travel: 140 mm. Rapid traverse Z1/Z2: 30 m/min, feed force: 8000 N, feed travel: 450 mm. Rapid traverse Y1: 6 m/min, feed force: 8000 N, feed travel: +/-35 mm. Machine dimensions X/Y/Z: approx. 4150 mm/2000 mm/1800 mm, weight: approx. 4,750 kg, control: Traub System TX 8F, operating hours: 12,938 h. Includes chip conveyor and LNS Quick Load bar feeder. Documentation is available. On-site inspection possible. Kdjdpfev Scrbjx Aazjw

Sąlyga: geras (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, Traub CNC Lathe TNC65DGY, TX8H, Year 2001 • 2x 10-station turrets with live tooling drive VDI30 • C-axis on main and counter spindle • Y-axis on turret 1 • Hainbuch BZI65 on main/counter spindle Hollow clamping cylinder • Chip conveyor, coolant tank Kedowi Izhjpfx Aazsdw • Spare parts list, wiring diagram, ATC sensor system Very good condition. Machine can be inspected under power. Machine geometry has been checked and adjusted/set.