CNC tekinimo staklės

Traub TNC 65 DGY

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1996, veikimo valandos: 46 282 h, greitas poslinkis X ašimi: 15 m/min, greitas poslinkis Y ašis: 15 m/min, greitasis eiga Z ašyje: 15 m/min, bendras aukštis: 2 600 mm, bendras ilgis: 11 000 mm, bendras plotis: 2 000 mm, bendras svoris: 6 000 kg, valdiklių gamintojas: TRAUB, valdiklio modelis: TX 8F, priešpriešinio veleno didžiausias greitis: 4 000 aps./min, įrankių magazino lizdų skaičius: 10, - Includes two 10-position tool turrets with live tooling stations - Includes HAINBUCH chucking system - Includes sub-spindle, bar feeder (manufacturer: STAMAG) - Includes chip conveyor TECHNICAL DATA: - Operating voltage: 400 V - Frequency: 50 Hz - Control voltage: 230 V - Rated current: 85 A - Connection: 54 kW - Connected load: 39 kW - Noise emission at operator station: 71 dB(A) Ambient conditions: - Temperature: 5 – 40°C - Humidity: max. 70% - Workpiece discharge via sub-spindle - Max. sub-spindle speed: 4000 rpm - Max. workpiece diameter: 56 mm - Programming: EIA and ISO code Input/output resolution: - X/Z: 0.001 mm - C-axis: 0.001° - Rapid traverse: max. 15 m/min - Fine interpolation cycle: 0.34 ms - Max. thread pitch: 999.999 mm - Max. radius: 99,999.999 mm - Feed override: 0…200% - Rapid traverse override: 0…100% - Spindle speed override: 50…120% - Spindle speed input: 5 digits - Cutting speed input: 4 digits - Tool input: 4 digits - Program number: 8 digits - Subprogram number: 8 digits - Block number: 4 digits - M-codes: 3 digits - B-codes: 6 digits - Memory capacity: 32,000 characters - Tool offset pairs: 40 CNC TURNING AND POSITIONING UNIT (C-AXIS): Main spindle: - Max. speed: 80 rpm - Torque at 100% duty cycle: 100 Nm - Accuracy: +/- 3 minutes Sub-spindle: - Max. speed: 80 rpm - Torque at 100% duty cycle: 30 Nm - Accuracy: +/- 3 minutes TOOL CARRIERS 1 & 2: - Driven tools per tool carrier: 10 (14) - Max. speed: 4000 (8000) - Power at 100% duty cycle: 1.5 kW - Power at 15% duty cycle: 4 kW - Torque at 15% duty cycle: 12.4 (4) Nm - Tool holder/tool carrier positions: 10 (14) - Cylindrical shank per DIN 69880: Ø 30 x 55 (25 x 48) mm - Tool cross-section: 20 x 20 (16 x 16) mm - Chip-to-chip time (per VDI 2852): 1.2 s - Index time per station: 0.6 s - Over 5 stations: 1.5 s Isdpfswpa Rusx Afwoa SUB-SPINDLE (NUMERICALLY CONTROLLED IN Z-AXIS): - Max. speed: 4000 rpm - Max. clamping diameter: 65 mm - Infinitely variable 3-phase motor: 11 kW - Torque: 210 Nm - Feed force at 100% duty cycle: 6000 N - Feed travel: 520 mm - Ball screw drive: Ø 32 x 10 mm HYDRAULICS: - System pressure: 60 bar - Tank capacity: 150 l COOLANT SYSTEM: - Per tool carrier: Single-stage centrifugal pump - Pump pressure: 5/12 bar - Tank capacity: - without chip conveyor: 300 l - with chip conveyor: 280 l NOTE: Due to occasional usage, operating hours may vary slightly.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2017, Allgemeine Daten Maße Breite 3000 mm Maße Tiefe 2300 mm Maße Höhe 2700 mm Maschinengewicht 9600 kg Steuerungseinheit Hersteller HEIDENHAIN Modell TNC 640 Hauptantrieb Anzahl Spindeln 1 Drehzahlbereich Spindel 20000 1/min Werkzeugaufnahme SK40 Anzahl Achsen 5 Verfahrwege X-Achse 600 mm Y-Achse 500 mm Z-Achse 500 mm Medien Späneförderer Ja Zusatzausstattung Späneförderer, Kühlsystem, Werkzeugkettenmagazin, Innenkühlung, erweiterte Spülung, drehbares Sichtfenster, Nebelabscheider, Blasluft, optische Messsonde, Werkzeugbruchkontrolle, Spülpistole, 3D-Steuerung, NC-Schwenkrundtisch, Vorbereitung für Handhabungssystem, Signalleuchte, elektronisches Handrad, Anzeige Optionales Zubehör zum Verkauf: 48 x Aluminium-Spannplatten (Eigenbau); 48 x Maschinenschraubstöcke HSG5 von Ceratizit (WNT); 5 x Regale (Eigenbau); Werkzeuge und Halter Diese 5-Achs-Bearbeitungszentrum DMG MORI DMU 60 EVO wurde 2016 gebaut. Ausgestattet mit der Heidenhain iTNC 640 Steuerung, einer Spindeldrehzahl von 20000 1/min und 120-fach Werkzeugwechsler. Die Maschine verfügt über einen Späneförderer, ein Kühlsystem sowie eine interne Kühlmittelversorgung mit 40 bar. Die DMU 60 EVO ist ideal für komplexe Bearbeitungsaufgaben und stellt eine robuste Ergänzung für jede Werkstatt dar. Für weitere Informationen zu diesem vertikalen Bearbeitungszentrum kontaktieren Sie uns bitte. Iedpfxow S N Igo Afwea Anwendungsgebiete Fräsen

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1996, veikimo valandos: 38 433 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 489, Strypo skersmuo (maks.): 65 mm, valdiklio modelis: TRAUB TX8F, juostos ilgis: 3 000 mm, ašių skaičius: 7, Įranga: drožlių transporteris, strypų padavėjas, CNC tekinimo automatas su septyniomis ašimis bei pagrindiniu ir priešpriešiniu špindeliais! TECHNINĖS DETALĖS Ašys ir špindeliai Ašių skaičius: 7 Pagrindinis špindelis: yra Priešpriešinis špindelis: yra Isdpjw Uiktefx Afwja Revolverių skaičius: 2 C ašys: 2 Y ašis: 1 Valdymas: TRAUB TX8F STAKLIŲ DETALĖS Darbo valandos: 38 433 val. ĮRANGA Stamag DN61 strypų padavėjas (strypo skersmuo 65 mm, strypo ilgis 3 m) Aušinimo sistema Detalių išvedimas Drožlių transporteris Oro filtras

Gamybos metai: 1996, Sąlyga: paruoštas naudoti (naudotas), Turning length: 450 mm, spindle bore: 65 mm, spindle speed: 4000 rpm, main spindle/subspindle power: 18.5 kW / 11 kW, tool stations: 10, live tools: 10, hydraulic capacity: 150 l, hydraulic pressure: 60 bar, total connected load: 39 kW. Rapid traverse X1/X2: 15 m/min, feed force: 5000 N, feed travel: 140 mm. Rapid traverse Z1/Z2: 30 m/min, feed force: 8000 N, feed travel: 450 mm. Rapid traverse Y1: 6 m/min, feed force: 8000 N, feed travel: +/-35 mm. Machine dimensions X/Y/Z: approx. 4150 mm / 2000 mm / 1800 mm, weight: approx. 4750 kg, control: Traub System TX 8F, operating hours: 78,825 h. Documentation available. An on-site inspection is possible. Ijdev Scrhspfx Afwsa

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2018, Index G220 CNC sıvama-fréze tezgahı Üretim yılı: 2018 (Demo makinesi) Yeniden devreye alma: 2021 Kontrol ünitesi: Siemens 840D Solution Line, az üretim saati Ana iş mili D90 Karşı iş mili D90 Kavrama basınç cihazı 8 ila 80 bar Üst takım taşıyıcı motorlu freze miliyle HSK-T63 X, Z, Y ve B eksenleri Takım taşıyıcı 2: X, Y, Z ekseni ve 12 istasyonlu taret başlığı VDI30 Takım değiştirici: çift sıralı zincir magazin, 2 x 50 HSK 63 takım yuvası Takım yönetimi tipi 'Freze makinesi' (bağıl D numarası ile) Soğutma ünitesi Otomatik iş parçası kapısı Matkap kırılma kontrolü için ışık bariyeri Motorlu freze mili için 5 eksenli simultane işleme Motor akımı bazlı takım izleme sistemi Kurulum diyaloğu ile takım yönetimi (maks. 250 takım) Ana veya karşı iş milinde iş parçası ölçümü Ölçüm çevrimleri Çapraz kızak 2 için takip puntası Karşı iş milinde punta fonksiyonu Elektronik şaft Ijdew Tfanjpfx Afwsa Taşlama çevrimleri Talaş konveyörü Filtre Soğutma sıvısı sistemi ECO-Fluid, 3 pompa: 3, 8, 20-80 bar UNIMAG4 Portal tipi parça çıkarma cihazı Taşıma bandı Kavrama aparatları ve takım tutucular hariçtir, bulunduğu yerde teslim.

Sąlyga: geras (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, Traub CNC Lathe TNC65DGY, TX8H, Year 2001 Isdpfewi Izhsx Afwja • 2x 10-station turrets with live tooling drive VDI30 • C-axis on main and counter spindle • Y-axis on turret 1 • Hainbuch BZI65 on main/counter spindle Hollow clamping cylinder • Chip conveyor, coolant tank • Spare parts list, wiring diagram, ATC sensor system Very good condition. Machine can be inspected under power. Machine geometry has been checked and adjusted/set.

Sąlyga: nepatikrintas (naudotas), Gamybos metai: 1996, veikimo valandos: 46 282 h, Funkcionalumas: nepatikrintas, mašinos/transporto priemonės numeris: 18770, valdiklio modelis: TX 8F, spaustuvo skersmuo: 65 mm, priešpriešinio veleno didžiausias greitis: 4 000 aps./min, ruošinio skersmuo (maks.): 56 mm, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20.11.2025! Placing a bid constitutes a binding commitment to collect the machine between 01.12.2025 and 05.12.2025! TECHNICAL DETAILS Max. workpiece diameter: 56 mm Max. clamping diameter: 65 mm Max. speed of counter spindle: 4,000 rpm Counter spindle power: 11 kW Constant power range (counter spindle): 1:8 Counter spindle torque: 210 Nm Tool drive Max. tool drive speed: 4,000 rpm Tool drive power at 100% duty cycle: 1.5 kW Tool drive power at 15% duty cycle: 4 kW Tool drive torque at 15% duty cycle: 12.4 Nm (4 Nm) Number of tool stations: 10 (14) Cylindrical tool mount: ∅ 30 x 55 mm (25 x 48 mm) Chisel cross-section: 20 x 20 mm (16 x 16 mm) Chip-to-chip time: 1.2 s Indexing time for one station: 0.6 s Indexing time for 5 stations: 1.5 s Input and output resolution X/Z: 0.001 mm Input and output resolution C-axis: 0.001° Fine interpolation cycle: 0.34 ms Max. thread pitch: 999,999 mm Max. radius: 99,999.999 mm Max. speed (C-axis): 80 rpm Torque (main spindle C-axis) at 100% duty cycle: 100 Nm Accuracy (main spindle and counter spindle C-axis): ± 3 min Rapid traverse and feed rate: 30,000 mm/min Rapid traverse: max. 15 m/min Feed force at 100% duty cycle: 6,000 N Feed travel: 520 mm Ball screw (∅ x pitch): 32 x 10 mm Feed override: 0 – 200% Rapid traverse override: 0 – 100% Spindle speed override: 50 – 120% MACHINE DETAILS Control system: TX 8F Ijdexpgl Aopfx Afwea Dimensions & Weight Dimensions (L x W x H): 11,000 x 2,000 x 2,600 mm Weight: 6,000 kg Electrical Data Operating voltage: 400 V Frequency: 50 Hz Control voltage: 230 V Rated current: 85 A Connection: 54 kW Connected load: 39 kW Noise emission at operator's position: 71 dB(A) Ambient temperature range: 5 – 40°C Max. humidity: 70% System pressure (hydraulics): 60 bar Hydraulic tank capacity: 150 l Coolant pump pressure: 5/12 bar Tank capacity without chip conveyor: 300 l Tank capacity with chip conveyor: 280 l Input Spindle speed input: 5 digits Cutting speed input: 4 digits Tool input: 4 digits Program number: 8 digits Subprogram number: 8 digits Block number: 4 digits M-codes: 3 digits B-codes: 6 digits Memory capacity: 32,000 characters Operating hours: 46,282 h (as of 17.10.2025) EQUIPMENT Two 10-position tool turrets with driven tool stations HAINBUCH chuck system Counter spindle Bar feeder by STAMAG Chip conveyor

Sąlyga: geras (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, Control unit: OSP-P20L-R Swing diameter over bed: 450 mm Swing diameter over longitudinal slide: 350 mm Swing diameter over cross slide: 300 mm Spindle bore: 43 mm Spindle speed range: 75 - 3,000 rpm X-axis feed rate: 0.00001 - 39.37 mm/rev X-axis rapid traverse: 20 m/min Z-axis feed rate: 0.00004 - 38.37 mm/rev Z-axis rapid traverse: 25 m/min Tool turret: 12-position Driven tools Iedpfxsvk Sqkj Afwja Tool holder: VDI30 Machine weight: approx. 3,800 kg Bar feeder: BREUNING IRCO

Gamybos metai: 2015, Sąlyga: paruoštas naudoti (naudotas), A Traub CNC twin-spindle lathe, completely overhauled in 2025, is available. Turning length: 450 mm, spindle bore: 65 mm, spindle speed: 4000 rpm, main spindle/sub spindle power: 18.5 kW/11 kW, tool stations: 10, driven tools: 10, hydraulic capacity: 150 l, hydraulic pressure: 60 bar, connected load: 39 kW. Rapid traverse X1/X2: 15 m/min, feed force: 5000 N, feed travel: 140 mm. Rapid traverse Z1/Z2: 30 m/min, feed force: 8000 N, feed travel: 450 mm. Rapid traverse Y1: 6 m/min, feed force: 8000 N, feed travel: +/-35 mm. Machine dimensions X/Y/Z: approx. 4150 mm/2000 mm/1800 mm, weight: approx. 4,750 kg, control: Traub System TX 8F, operating hours: 12,938 h. Includes chip conveyor and LNS Quick Load bar feeder. Documentation is available. On-site inspection possible. Ijdpsv Scrbjfx Afwoa

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2010, veikimo valandos: 15 600 h, Funkcionalumas: visiškai funkcionalus, Spindelvarvtal: 50-6000 rpm Rörelse XA-XB: 205 mm ZA-ZB: 700 mm W: 730 mm YA-YB: 95 mm Revolvrar: 2x 16-positioners Multitasking V16 Varvtal drivna verktyg: 45-6000 rpm Iedpfxjwfr R Es Afwsa Motorer drivna verktyg: 5,5/3,7 kW Spindelmotorer: 22/15 kW Tillverkningsår: 2010.12 Längd: 3300 mm Bredd: 2500 mm Höjd: 2500 mm Vikt: 9000 kg Robotinterface