įtrūkimų tikrinimo staklės

TIEDE Universal 600 WE

Gamybos metai: 2020, Sąlyga: naujas, Touch to Delete ROMER cabins are equipped with 4-inch color touch lights. The cabin control system is intuitive and available with three operating modes: automatic (intermittent), automatic (via plug-in filter cartridge), or manual. Filter Cartridge Sensor The cabins are fitted with a sensor that collects the filters for cleaning when they become clogged. The system also notifies when filters need to be replaced. Automatic Filter Cleaning Cedpofz I Ehefx Admjhf The electronic automatic filter cleaning system controls both the cleaning frequency and burn-off timing. Each filter is cleaned individually; filters can also be cleaned manually using compressed air. From experience, we know it is difficult to rely on the operator to clean the filters. Thanks to this system, the operator no longer needs to intervene. Low Noise Level Aluminum fans operate very quietly at a noise level of 74–79 dB, which is not excessive. Even with the standard cabin design, it is difficult to conduct a conversation near the fans. Squirrel-Cage Blower Cabins fitted with overhanging squirrel-cage blowers improve operational efficiency and free painters from having to move units manually. Design can be reserved in advance. Explosion Protection The remaining cabins are designed to prevent the build-up of explosible mixtures during the painting process. Every component has been carefully selected to minimize this risk.

Sąlyga: naujas, Gamybos metai: 2018, For sale is an unused Rösler FKS 35 Tandem with acoustic enclosure, manufactured in 2018. The system remains in its original packaging and is available from our warehouse. You are welcome to arrange an on-site inspection appointment by phone in advance. Codpfx Ael D Ex Dsdmohf

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2019, Hainbuch centroteX quick-change system (year: 2019) • 2x centroteX M machine adapters (A037017.0382B): o Short taper size: KK8 o Draw tube connection: M85x2 o Length: 53 mm o Through-hole: 78 mm • 1x TOPlus mini Axfix Gr.65 (A038531.0015C) o ID no.: 10000678 o Length: 136 mm • 1x TOPlus mini Axzug Gr.65 (A038530.008C) o ID no.: 10000676 o Length: 134.5 mm • 1x Hainbuch (HWR) InoFlex VT026 – 4-jaw chuck o Length: 179 mm o Diameter: 210 mm • 1x Forkardt 3-jaw chuck (3QLC 250-72 Z8-S12) o Length: approx. 155 mm o Diameter: 257 mm • 1x monteq quick-change system (A012708.0009B) • 1x D400 roll container o Storage for 4 clamping devices listed above o monteq quick-change system + Tiger crane hook mounted on the side • Documentation/instructions • 1x tool box with accessories Accessories • TOP65 clamping head (for raw material) o 1 pc each: d12, 20, 30, 36, 40, 50, 55, 60, 65 • TOP65 clamping head (hexagon) o 1 pc each: SW36, 45, 46, 50 • TOP65G clamping head (smooth) o 1 pc each: d8, 10, 12, 14, 15, 16, 17, 18, 20, 22, 23, 24, 25, 26, 27, 28, 30, 32, 33, 34, 35, 36, 39, 40, 42, 44, 45, 46, 50, 54, 56, 60, 62, 64, 65 o 2 pcs: d38 • 1x extraction ring for clamping head 65 • Total of 50 clamping heads • Jaw accessories o For HWR 4-jaw chuck:  1 set of reversible jaws  3 sets of claw jaws o For Forkardt 3-jaw chuck: Codpfx Ajv Ivaksdmehf  1 set of hard reversible jaws o Various T-nuts + bolts o Various distance bolts for jaws (to adjust clamping length) • Various soft jaws (2 pallets)

Sąlyga: labai geros būklės (naudotas), Buderus Logano SK735 – 830 kW, 6 bar, also available with 1200 or 1400 kW Csdshtf Dkopfx Admehf

Sąlyga: paruoštas naudoti (naudotas), Operates according to the magnetic particle inspection method, with documentation and accessories; on-site inspection is possible. Codpfxjq Npf Us Admjhf

Gamybos metai: 2018, Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: H3000TM, Universal Testing Machine H3000TM – Made in Germany Crosshead travel: 520 mm Working depth: 66 mm Overall height: 1010 mm Weight: 45 kg Test speed: 1 to 500 mm/min Return speed: 500 mm/min Displacement resolution: 0.01 mm We offer a very large selection of test fixtures: screw grips, wedge grips, pneumatic and hydraulic grips. Compression plates, bending devices, friction test jigs, and much more. Strain gauges, extensometers, long-travel sensors, clip-on transducers, climate chambers. Load cells available: 50N, 100N, 200N, 500N, 1000N, 2000N, or 3000N Including Hess software for Windows 8, 9, 10 or 11, enabling universal test routines, simple test operations also possible without a PC, and one 5 kN SP 56g screw grip with pyramid or rubber jaws (30x50 mm). Factory calibration certificate with DAkkS-calibrated measuring instruments. Calibration performed in both tension and compression in 10 steps. The H3000TM series universal testing machine is a single-column unit featuring a robust construction of aluminium and V2A stainless steel, with ball screw drives, linear ball bearings, and timing belt drive. The bellows cover provides protection for spindles and bearings. The device is microprocessor controlled, equipped with a membrane keypad. Position and force are displayed on a two-line LCD display. The testing machine can be used either in standalone mode or connected to a PC via a USB interface. Position measurement is carried out using an encoder, with a visible LCD resolution of 0.01 mm (internal resolution: 0.0001 mm). Supplied with a standard load cell offering 0.03% linearity and matching calibration. Optionally, a second channel for an additional load cell or displacement transducer can be added. The universal testing machine is available with two different travel ranges: 500 mm or 1200 mm (measured with load cell, without test fixtures). Scope of delivery: Chodpfxet Rg H As Admef One load cell of your choice (50N, 100N, 200N, 500N, 1000N, 2000N, or 3000N), certificate, 220 V cable, USB cable, instruction manual, and CE declaration of conformity. 3000N Load Cell Measurement range: 1–3000N tension and compression, with nominal 2mV/V output signal, overload protection: +/- 100%, linearity: +/- 0.05%, hysteresis: +/- 0.03%, repeatability: +/- 0.02%, including 1.5 m connection cable and calibration certificate.

Gamybos metai: 2000, Sąlyga: naudotas, x-travel 1000 mm y-travel 1600 mm z-travel 800 mm Control: WENZEL WPC 2040/FW31.351 Total power requirement: kW (not specified) Machine weight approx. 5500 kg Space requirement approx.: m (not specified) WENZEL CNC-controlled vertical 3-D coordinate measuring machine Model: LH 108 CNC Year of manufacture: 2000, but continuously serviced and calibrated by manufacturer Axis configuration: - Y-axis as long-travel measuring bridge: 1,600 mm - X-axis as measuring head carriage (cross travel): 1,000 mm - Z-axis as vertical measuring quill: approx. 800 mm Maximum workpiece weight / table load: approx. 2,250 kg Clearance under measuring bridge: approx. 900/1000 mm Overall table size: approx. 2,600 x 1,250 mm Table height above floor: approx. 700 mm Table plate thickness: 380 mm Machine height: approx. 3,100 mm Weight: approx. 5,500 kg Special Features / Accessories: Cedpfx Adot Hw Nysmshf • Measuring table, crossbeam, and quill made from dark natural hard stone; table with 6 x 9 threaded holes for workpiece/fixture clamping • All axes are air-bearing for smooth, virtually wear-free operation; equipped with incremental scales, 0.0005 mm resolution • WENZEL CNC control type WPC 2040 / FW31.351 built into worktable (controller replaced approx. 3 years ago) • WENZEL measurement software METROSOFT QUARTIS R 12 SP 1 with SurfPro package and QUARTIS Q-DAS • RENISHAW motorized rotary and swivel head (automatically indexable in 7.5° increments), probe head model PH 10 M plus, with TP 20 probe and various probe accessories • RENISHAW probe head controller unit type PHC 10 C-3 plus, also built into the worktable • Automatic probe changer, 6-position probe magazine model MCR 20 mounted on the table • Mobile hand control panel with progressive control lever (joystick) for manual adjustment of all 3 axes with infinitely variable travel speeds • Sphere standards for table setup, work table, various clamping devices, etc. Condition: Very good – generally in stock, powered for inspection. Ready for demonstration. Disassembled by a CMM specialist at the seller and reassembled here. Delivery: Ex-stock – as is, as inspected Payment: strictly net – upon receipt of invoice.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2002, Funkcionalumas: visiškai funkcionalus, DESCRIZIONE TECNICA Rettificatrice CNC EWAG a 6 assi per utensili, modello Ewamatic Line. Marca: EWAG Modello: Ewamatic Line ERS - SK2000 Anno: 2002 Tipo di controllo: CNC Controllo: NUM 1050 Provenienza: Svizzera Peso macchina ca. 4 t Dimensioni macchina ca. 2365 x 2920 x 2810 mm Cjdpfxov Tbfpj Admshf Corsi: Asse trasversale X: 360 mm Regolazione in altezza Y: 150 mm Asse di avanzamento Z: 230 mm Asse di rotazione B: +/-120° Asse di inclinazione A: -15...+25° Controtesta divisore con modalità rettifica cilindrica, variante di serraggio HSK63 (asse C, 1000 giri/min) Testa di rettifica a torretta a 6 stazioni inclinabile: Mandrino di rettifica Ø 80 mm, numero 6, disposti a stella Mole abrasive Ø max. 250 mm Potenza motore mandrino di rettifica: 7,5 kW, velocità 12.000 giri/min Stazione di misura 3D RENISHAW Dispositivo di ravvivatura per la ravvivatura automatica delle mole diamantate e CBN Impianto di raffreddamento Incluso estrattore di nebbie oleose Donaldson

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2003, Ratų skersmuo - maks. 600 mm Ratų plotis 700 mm Modulis - maks. 20 Modulis - min. 0,5 Stalo skersmuo 300 mm Chjdjwyxycspfx Admsf X eiga 300 mm Y eiga 600 mm Z eiga 700 mm Detalės svoris 300 kg Valdymas Zeiss Detalės skersmuo - maks. 600 mm Apkabinimo ilgis 20 - 1000 mm Pasvirimo kampas - maks. 90° Bendras elektros poreikis 2 kW Staklių svoris apie 2,5 t Užimamas plotas apie 3,0 x 2,0 x 2,4 m Formos matavimo staklės, krumpliaračių matavimo staklės, koordinatinio matavimo staklės --> Primar MX 4 WL Tinka transmisijos velenams, krumpliaračių velenams, krumpliaračiams, stūmokliams, pavarų korpusams, švaistikliams, paskirstymo ir alkūninio veleno velenams, alkūninio veleno korpusams, cilindrų galvutėms ir kt. Oro pagalvė, centruojantis ir pakreipiamas stalas, atrama, labai tiksli versija! Programinė įranga: krumpliaratis, dantų freza, stūmoklis, kūginis krumpliaratis, alkūninis velenas, švaistiklis Naujas programinės įrangos atnaujinimas 2014!

Gamybos metai: 1987, Sąlyga: naudotas, mašinos/transporto priemonės numeris: 7.0176, Note: We have 6 units of this machine in stock! Manufacturer: Gildemeister Model: GS 36 – 6 A/C Machine No.: 7.0176 Year of manufacture: 1987 Weight: 11 t General / technical data: Portal 6-spindle automatic lathe Spindle pitch circle: 300 mm Number of longitudinal slides: 6 Number of cross slides: 2 Max. cross slide travel: 60 mm Max. longitudinal slide travel: 125 mm Chodpein Ub Tofx Admef Spindle speeds: Infinitely variable 562 – 3373 rpm Main time range: Infinitely variable 1.95 – 78 seconds Secondary time range: 0.79 – 2.13 seconds Drive power: DC spindle motor 20 kW; feeds 8 kW Installation area: approx. 1720 x 4700 mm Note: The machine cannot be converted for bar work. Equipment: – 1 creep speed drive for setup operation – 1 automatic central lubrication system – 1 coolant system with piping and pump – 1 facing slide, position 3 (without cams) – 1 facing slide, position 5 – 6 longitudinal slides (without drive, without cams) – Feed for independent longitudinal slide, flexible, position 1–6 – Programmable logic controller IPC 620 – Noise protection measures 80db – Automatic feed re-engagement with electrical interlock for side door – Hinge belt chip conveyor – Machines equipped with DC drives for spindle speed and feed – KIENZLE terminal 2450-07 with signal interface and data transmission control Accessories: Electrical configuration: The electrical equipment consists of a direct current main drive with 20 kW output for the spindle and a three-phase servomotor for the feed drive with an output of 8 kW (protection class IP 54), as well as the appropriate switching and control devices and all required installation. Total connected load of the machine: 32 kW/h.