3D UV džiovintuvas

Superfici Poliedra x 2 + TU 3500

Sąlyga: geras (naudotas), Gamybos metai: 2003, Manufacturer: KUKA Nkjdpfoh Dw Dqex Agisu Model: KR 210 L 180 Year of manufacture: 2003 Maximum payload: 150 kg

Sąlyga: naudotas, Gamybos metai: 2014, Drive power: 3 kW Operating pressure: 7 bar Air delivery (flow rate): up to 58 CFM (approx. 1,640 l/min) at 7 bar Weight: 286 kg Chicago Pneumatic CPVR15 CE screw compressor – Year of manufacture: 2014 The CPVR15 CE impresses with its robust construction, long service life, and low operating costs. Whether in craft businesses, workshops, or industrial applications—this compressor reliably supplies the compressed air you need. Drive power: 3 kW Operating pressure: 7 bar Air delivery: up to 58 CFM (approx. 1,640 l/min) at 7 bar Weight: 286 kg Dimensions: approx. 965 mm (L) × 620 mm (W) × 1,040 mm (H) Operating noise: approx. 50–58 dB(A) Voltage/Frequency: 415 V / 50 Hz Application: workshops, craft businesses, industrial applications with medium compressed air requirements Scope of delivery: Nsdpfx Agoh A Sfdoijku 1x Compressor - Chicago Pneumatic CPVR15 CE 1x Refrigerant dryer - OMI ESD 108 - 0.70 kW 1x Beko Öwamat 2 - oil-water separator Technical data taken from publicly available sources.

Sąlyga: visiškai atnaujintas (naudotas), SCHLATTER MG24 Welded Mesh Production Line Completely Refurbished WORKING RANGE Panel width: max. 2,500 mm Weft wire length: min. 900 mm Weft wire length with QF5 distributor: min. 300 – 1,600 mm Maximum spacing between outer warp wires: 2,400 mm Mesh length (warp wire length): max. 2,500 – 6,000 mm Minimum spacing between warp wires: 100 mm Spacing between weft wires: 25 – 250 mm Adjustable by cutting device (0-1) Warp wire diameter: 4.0 – 12.0 mm Weft wire diameter: 4.0 – 12.0 mm Number of warp wires: max. 24 MG 24.1/8C MESH WELDING MACHINE, Standard Equipment Includes: - 1 Machine base frame - 1 Upper support for press reception, continuously adjustable via handwheel - 1 Magnet holders with holding magnets and monitoring of weft wires - 1 Row of pneumatic solenoid valves for press actuation - 1 Air and water system - 2 Pneumatic rotary drives with oil damping - Static torque with 5 bar compressed air: 480 Nm - Continuously adjustable front from 25 – 250 mm, adjustable by cutting device (0-1) - 1 Advance carriage with panel lifting device - 1 Set of tools for machine adjustment WELDING SECTION Includes: - 8 C-type transformers - Rated power per transformer: 100 kVA - Secondary open-circuit voltage: 7.1 V - Secondary rated current: 14 kA - 8 ES 130 thyristor contactors - 12 Welding presses: 5.0 kN - 12 Warp wire current bridges for 50–100 mm warp wire spacing - 12 Warp wire current bridges for 100 mm stepped warp wire spacing - 10 Warp wire current bridges for 100–150 mm warp wire spacing - 8 Warp wire current bridges for 150 mm stepped warp wire spacing - 6 Warp wire current bridges for 150–200 mm warp wire spacing - 6 Warp wire current bridges for 200 mm stepped warp wire spacing - 24 Lower copper electrode holders with standard angular electrodes, each with a water-cooled current cable, width: 58 mm - 24 Wire holding clamps Panel width: max. 2,500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 – 1,600 mm Spacing between extreme warp wires: max. 2,400 mm Mesh length (warp wire length): max. 2,500 – 6,000 mm Spacing between warp wires: min. 100 mm Nkjdpfx Aswu Tu Dsgisu Weft wire spacing: 25–250 mm Warp wire diameter: 4.0 – 12.0 mm Weft wire diameter: 4.0 – 12.0 mm Number of warp wires: max. 24

Sąlyga: labai geros būklės (naudotas), Independent machine - Universal machine (First & Second in a machine line) Electronic control – EasyLing programmer Safe and soundproof casing No. 3+3 vertical columns to support the working units Min. useful working width (mm): 240 Max. useful working width (mm): 3,100 Min. useful working thickness (mm): 3 Max. useful working thickness (mm): 150 Retractable positioning cams, spacing (mm): 800 Feed rate (min/max), stepless adjustment (m/min): 4 – 24 Total power No. 4 machining groups (for each side of the machine): Scoring unit Automatic scoring unit 1 x 3 kW (6,000 RPM) Nkodpfx Aswhmdfjgisu Planing unit 1 x 6 kW (6,000 RPM) 0–10° Universal milling unit (electropneumatically controlled) 1 x 6 kW (6,000 RPM) 0°–90° Universal milling unit 1 x 6 kW (6,000 RPM) 0°–90°

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, We offer for sale a complete multi-point automatic steel wire welding line by SCHLATTER. We have three fully operational production lines available. Automatic machines for the production of cross wires (so-called straighteners with cut-off units) are also available. Additionally, we have a wide range of individual spot welders for steel wire. Nkjdpfxjtvpilo Agiou

Sąlyga: labai geros būklės (naudotas), Line for door frames (casings), for cutting, milling of strike plates, and inserting hinges (ANUBA) comprising: X10030A) Discharge conveyor Nedsqwycljpfx Agieku X10030B) Transfer unit X10030C) Double cutting and drilling machine "AMS" - 45° left-side cut – Drilling - 90° cut - 45° right-side cut – Drilling X10030D) Angle conveyor (90°) X10030E) Anuba hinge insertion machine "MASTERWOOD" model MULTITEC X10030F) Strike plate milling machine "MASTERWOOD" model Teknomat 3000

Sąlyga: geras (naudotas), Gamybos metai: 2007, mašinos/transporto priemonės numeris: 94323, X ašies eiga: 3 060 mm, Y ašies eiga: 1 260 mm, Z ašies eigos atstumas: 150 mm, bendras aukštis: 2 400 mm, bendras ilgis: 4 400 mm, bendras plotis: 2 800 mm, bendras svoris: 3 130 kg, For sale: CNC MACHINING CENTER IN CONTINUOUS OPERATION Biesse ROVER 3.03 CNC Machining Center Fully operational, available for inspection in Wadowice. X-axis travel: 3060 mm Nodpfowpthtox Agioku Y-axis travel: 1260 mm Z-axis travel: 150 mm CNC control type: XP 600

Sąlyga: naujas, Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, Naujas Friulmac EQ 004 2.5 su padavimo konvejeriu ir padavimo bunkeriu Valdymas liečiamu ekranu ir automatinis reguliavimas Njdpfx Agevupm Dsieku Darbinis ilgis: min 190 mm – maks 2500 mm Plotis: min 30 mm – maks 250 mm Storis: min 12 mm – maks 35 mm Greitis: 6–25 m/min 2 x 2 Viršutinis velenas – 3 kW – 720 aps./min. Pagrindinis profiliavimo velenas – 4 kW – 7200 aps./min. Dėl išsamesnės informacijos galiu atsiųsti originalią dokumentaciją.

Sąlyga: naujas, Capaciteit, mm ----- 25 x 2 mm Radius, min/max ----- 10/100 mm Radiusverschil ----- 90 mm Buigsnelheid/herhaalbaarheid ----- 500º/s. ±0,05° Buislengte ----- 1.350 ∞ mm Njdpfxoga T Exe Agioku Gewicht ----- 2.200 kg Machineafmetingen ----- 3,0 x 1,2 x 1,3 m Buisrotatie ----- 0–850°/sec Lengteaanvoer ----- Standaard 0–2.400 mm/sec Booster ----- 0–1.200 mm/sec Tolerantiegraad ----- 0,05°/mm Draaibeweging van de buigkop ----- 0,75 sec Standaard componenten voldoen aan VDMA-, ISO- en DIN-normen. OPTIES * Online koppeling met CAD-systeem en meetmachine * Automatisch buismagazijn met vrij programmeerbare robot of laadarm * Lasnaaddetector en buispositioneerder via elektromagnetische of optische detectie * Vrije radiusbuiging * Simulatie/Collision Control * Verlenging van het bed

Sąlyga: geras (naudotas), WEBER pipe extrusion line including: WEBER DS 8.5 Elmepla saw Battenfeld R200/6 Battenfeld V125 Njdpfsvryhyjx Agioku