Frezavimo staklės - universalios

STIMIN FUS-22-2M

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2013, - Universal milling head - Fixed angle table 670 x 320 mm - Coolant system - Chip tray - Quill cover - Set of operating tools - Technical documentation - CE-compliant version - Colour: * RAL 5015 – Sky Blue * RAL 7035 – Light Grey Optional accessories: - SINO 3-axis position display: €1,995.00 - 1 set of levelling wedges (4 pcs): €480.00 Technical Data: Work Table: - Clamping area of fixed angle table: 670 x 320 mm - T-slots: Number / Width x Distance: 5 / 12 x 63 mm - Max. workpiece weight: 150 kg - Vertical clamping area: 670 x 220 mm - T-slots: Number / Width x Distance: 3 / 12 x 60 mm Work Spindle: - Tool holder horizontal and vertical: ISO / DIN: 40 / 2080 - Main drive motor power 100% duty cycle: 1.5 kW Vertical Milling Head: - Speed range: 45 – 2,240 rpm - Number of speed steps: 18 - Manual quill adjustment: 60 mm - Swivel range: 360 degrees Travel: - X-axis automatic / manual: 280 / 300 mm - Y-axis automatic / manual: 250 / 270 mm - Z-axis automatic / manual: 300 / 310 mm Feeds: - Feed rate range: 12.5 – 630 mm/min - Number of feeds: 18 - Rapid traverse: 1,200 mm/min Dimensions and Weight: - Length: 1,265 mm - Width: 1,080 mm - Height: 1,620 mm - Weight approx. 1,000 kg Bjdpfxeg D Rhhs An Hjln Machine inspection / machine acceptance: Prior to loading of the machine SUBJECT TO ERRORS AND PRIOR SALE!

Būklė: naudotas, TECHNICAL DATA - Number of axes: 10 - Number of spindles: 2 MAIN SPINDLE - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Minimum C-axis resolution: 0.001° SUB-SPINDLE - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm Bedpfxev Ig Ave An Hjln - Minimum C-axis resolution: 0.001° - Travel: 390 / 600 mm TURNING-MILLING SPINDLE - X-axis travel: 350 mm - Y-axis travel: ±80 mm - B-axis swivel range: 270° - Minimum B-axis resolution: 0.001° - Tool type: HSK-T40 - Spindle speed: 18,000 rpm - Spindle drive power: 11 kW - Fixed tools on milling spindle: 6 x VDI25 LOWER TURNING AND MILLING SPINDLE - Y-axis travel: ±80 mm - B-axis swivel range: 270° - Minimum B-axis resolution: 0.001° - Tool type: HSK-T40 - Spindle speed: 18,000 rpm - Spindle drive power: 11 kW - Fixed tools on milling spindle: 6 x VDI25 TOOL CHANGER - Tool changer type: Bar magazine - Number of tools in magazine: 80 - Tool change time: 4.5 sec ELECTRICAL SUPPLY - Supply voltage: 400 V - Total connected load: 68 kW WEIGHT AND DIMENSIONS - Machine height: 2,500 mm - Machine weight: 11,000 kg OPERATING HOURS - Spindle hours: 19,781 h - Turning-milling spindle hours: 9,713 h EQUIPMENT - Control system: Siemens Sinumerik 840D SL - Coolant tank * with high-pressure pump * with paper filter * internal coolant supply (IKZ) - Chip conveyor - Spindle cooling - Parts removal system

Būklė: labai geros būklės (naudotas), Gamybos metai: 1990, mašinos/transporto priemonės numeris: 30216 & 30277, padavimo ilgis X ašis: 1 000 mm, X ašies eiga: 1 000 mm, Universali įrankinė frezavimo staklė Gamintojas: MAHO Modelis: MH 1000 Yra 2 vnt! x eiga: 1000 mm Įrankių tvirtinimas: SK 40 Skaitmeninis indikatorius. Galva pasukama +/- . Stalas pakreipiamas ir pasukamas +/- . Pinolės eiga. – 3 ašių skaitmeninis indikatorius – Universalus stalas 1 250 x 740 mm (T-įpjova 16 mm) – Vertikali frezavimo galva SK 40 su traukiamuoju sriegiu S 20 x 2 Blsdpfjp S Schjx An Hon – 6 automatiniai pinolės padavimo žingsniai 0,02/0,03/0,05/0,08/0,12/0,20 mm/aps. – Centrali rankinė tepimo sistema Staklės gali būti apžiūrėtos vietoje. Nedelsiant paruošta eksploatacijai Pakrovimas įskaičiuotas, transportavimas nesudėtingas.

Būklė: naudotas, mašinos/transporto priemonės numeris: 7979, Table diameter: 400 mm Table with 8 T-slots: 12 mm Bledob Ez R Uepfx An Hen Overall height: 175 mm Required space: 600 x 450 x 175 mm Weight: approx. 100 kg

Būklė: geras (naudotas), Gamybos metai: 1988, Kraštų lankstymo staklės, lenkimo presas, švytuoklinės lankstymo staklės, štampavimo lenkimo staklės Bedpfx Asv Tpxqjn Hjln -Pristatymas: esamoje, kaip apžiūrėta, būklėje, žr. nuotraukas -Funkcija: rankinis valdymas (be automatinio režimo) -Gamintojas: RAFAMET švytuoklinės lankstymo staklės, tipas KM-4 -Pavara: mechaninė -Maks. darbo plotis: 2020 mm -Maks. lakšto storis: 4 mm -Atstumas iki atmušos: 750 mm -Galia: kW -Matmenys: 3350/1540/H1510 mm -Svoris: 3900 kg

Būklė: geras (naudotas), Gamybos metai: 2008, padavimo ilgis X ašis: 400 mm, padavimo eiga Y ašimi: 250 mm, padavimo ilgis Z ašis: 400 mm, Heidenhain TNC 124 control Quill Bjdpfx Anjrb A Tce Heln electronic handwheel coolant system Technical data: Longitudinal travel (X-axis): 400 mm Cross travel (Y-axis): 250 mm Vertical travel (Z-axis): 400 mm Table clamping area: 600 x 320 mm Spindle taper: SK40 Spindle speed range: 30–6300 rpm Feed X, Y, Z: 10, 10, 8 m/min Total drive capacity: 6.5 kW Weight approx.: 1200 kg Technical data, accessories and descriptions of the machine are non-binding.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1984, Funkcionalumas: visiškai funkcionalus, sukimosi skersmuo virš skersinio stumduko: 630 mm, veleno skylė: 320 mm, tekėjimo skersmuo: 1 200 mm, tekinimo skersmuo virš slankiojančio stalo: 930 mm, tekėjimo ilgis: 3 000 mm, Lathe in very good technical condition; it has seen very little use and was not utilized for pipe machining. The Poręba TPL 90/3m lathe (commonly listed in the market as a TPK 90 series variant) is a textbook example of an oil country lathe (Hollow Spindle Lathe). This model meets all specific criteria for machines intended for the Oil & Gas sector. • Large Spindle Bore: Machines in this version feature a spindle bore diameter of 320 mm (approx. 12.5 inches), which allows thick-walled drill and casing pipes to pass freely through the spindle. • Dual Chuck System: The headstock design allows the installation of two independent lathe chucks (front and rear, typically 28" diameter), which clamp and stabilize the pipe at both spindle ends. • Optimal Working Dimensions: The '3m' designation defines the between-centers turning length (3000 mm), combined with a swing over bed diameter of 930 mm (hence the '90' in the name), enabling machining of massive pipeline components. • Extreme Rigidity: FUM POREBA machines are renowned for their monolithic, very wide, and heavy cast iron beds, effectively damping the huge vibrations arising during taper thread turning. In international used machinery listings, this particular Poręba model is classified directly under the 'Oil Field Lathes' category. TECHNICAL DATA: Geometric parameters and machining ranges: • Swing over bed: 930 mm / 36.6" • Swing over cross slide: 630 mm / 24.8" • Swing over gap: 1200 mm / 47.2" • Maximum turning length between centers: 3000 mm / 120" • Bed width: 585 mm / 23.0" Headstock: • Spindle bore diameter (Hollow Spindle): 320 mm / 12.6" (classified in US nomenclature as 12.5") • Spindle speed range: 5 – 250 rpm or modified versions up to 710 rpm • Number of spindle speed steps: 18 Feed and threading system: • Longitudinal feed range: 0.1 – 12.8 mm/rev / 0.004 – 0.504 in/rev • Cross feed range: 0.05 – 6.4 mm/rev / 0.002 – 0.252 in/rev • Thread types cut: Metric, Inch (Whitworth), Module, Diametral Pitch (DP) Tailstock: • Tailstock quill diameter: 130 mm / 5.1" • Tailstock quill stroke: 300 mm / 11.8" Bedpfsy Sf Azex An Heln • Quill internal taper: Morse No. 6 (MT6) Drive and machine dimensions: • Main motor power: 22 kW / 29.5 HP • Overall machine length: approx. 5500 mm / 216.5" • Overall machine width: approx. 1750 mm / 68.9" • Overall machine height: approx. 1500 mm / 59.0" • Total machine weight: approx. 8000 kg / 17,630 lbs

Būklė: geras (naudotas), Gamybos metai: 1999, Visi papildomi įrenginiai, matomi nuotraukose, bus komplektuojami. Techninės detalės pateiktos nuotraukoje. Bedeww Irijpfx An Hsln

Būklė: geras (naudotas), Gamybos metai: 1995, Universal Tool Milling Machine Deckel FP 1 – Multiple units available, see pictures Bjdpfjtdcfhjx An Hsln Model: FP 1 3-axis Heidenhain digital readout Price: from €9,500 excl. VAT Technical Data: X-travel: 300 mm Y-travel: 150 mm Z-travel: 340 mm Clamping surface: 600 x 210 mm T-slots: 5 T-slot width: 12 mm Spindle speed range – vertical: 250 – 2000 rpm Spindle speed range – horizontal: 40 – 315 rpm Spindle speed steps: 8 Feed rate range: 10 – 500 mm/min Feed rate steps: 8 Quill stroke: 60 mm Spindle taper: SK 40 Dimensions/Weight: 1235 x 1160 x 1800 mm / approx. 800 kg

Būklė: naudotas, Gamybos metai: 1979, Technical details: Grinding diameter min/max: Mounting: Ø 200 x 32 mm Spindle speed: 3,000 rpm Total power requirement: approx. 1.2 kW Bedeu Ng Ncepfx An Heln Machine weight approx.: 0.24 t Machine dimensions approx. LxWxH: 0.7 x 0.9 x 1.6 m The grinding spindle is equipped with two hand levers: Left working area = Hand grinding attachment for small shank drills, grinding wheel currently Ø 120 x 30 mm; mounting = Ø 32 mm; speed 3,000 rpm; includes grinding rest Right working area = Swivel attachment for tapered shank drills; cup grinding wheel currently Ø 160 x 30 mm; mounting = Ø 32 mm; speed 3,000 rpm. Point angle for double-edged drills max 180° and for triple-edged 120° Relief angle 5° - 9°; drill Ø 8 - 40 mm, possible grinding types e.g.: standard grind, cross-point grind, center grind, spiral grind, step drill grind Machine lighting included