Kraštų apdorojimo mašinos

Stefani Activa SB

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2002, mašinos/transporto priemonės numeris: AH/003306, Funkcionalumas: visiškai funkcionalus, ruošinio aukštis (maks.): 60 mm, ruošinio plotis (maks.): 3 200 mm, X ašies padavimo greitis: 40 m/min, TECHNINĖS DETALĖS Mobilus pečių atidarymas: 3 200 mm Maksimali plokštės plotis: 3 200 mm Minimali plokštės aukštis: 10 mm Maksimali plokštės aukštis: 60 mm Krašto juostos storis ritinyje, minimalus PVC-ABS: 0,3 mm Krašto juostos storis ritinyje, maksimalus PVC-ABS: 3 mm Pašarų greitis: 10 – 40 m/min Atstumas tarp įtraukiamų kaiščių: 500 mm ĮRANGA Varomas guminio spaudimo juosta Krovinio takas su įtraukiamais varžtais CNI valdymas atskirame valdymo skyde Ištiesinimo modulis su dviem varikliais (kiekvienai pusei) Klijų įrenginys su EVA klijų prilydytuvu Krašto prispaudimo volai Krašto laikiklio žurnalas su 2 pozicijomis Pjovimo įrenginys su dviem varikliais Perlenkiamo apipjaustymo grupė Pakopinis apdirbimo įrenginys su dviem varikliais Apvalinimo agregatas su 4 varikliais 0-90° kampu pakreipiama frezavimo galvutė Gujdpfx Apjxx N D Hsyjh Krašto nupjovimo įrenginys Šepetėlių grupė

Būklė: naujas, Gamybos metai: 2026, Gannomat Concept 70 Eco Lamella Carcase Clamp with Rapid Traverse Technical Data: Lamella carcase press from our showroom; Working range: width from 150 to 2,500 mm, height from 150 to 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, side lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly pressed carcase joints - Counterpressure surfaces are 40 mm thick, coated continuous support plates - The pressing force of the pressure beams is continuously electronically controlled via 2 potentiometers and set by frequency inverter, thus the torque transmission is completely wear-free. - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to stepless max. 2,200 daN (kg) - Pressing force for vertical pressure beams: min. 300 daN (kg) up to stepless max. 2,200 daN (kg) - Including option: Rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors integrated into the beams; pressing speeds of 5/10/25 mm/sec and rapid traverse speed of 50 mm/sec; sensors can be deactivated for clamping special parts. - Inch mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and carcases at 45 degrees. Simple operation via 6 separate push-buttons, freely adjustable pressing time preselection with automatic opening, feeding height 300 mm. Gedpfxjiidm Nj Apysuh The machine is on display in our showroom and available for immediate delivery. Location: ex stock 54634 Bitburg - immediately available -

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 8153336470, bendras svoris: 616 kg, tūrio srautas: 399 m³/val, slėgis (min.): 4 juosta, slėgis (maks.): 13 juosta, triukšmo lygis: 67 dB, aušinimo tipas: oras, Įranga: Tipinė plokštelė prieinama, dokumentacija / vadovas, šaldymo sausintuvas, We are a company specializing in the compressed air industry for over 20 years. The professional level of service and high-quality, market-proven products offered by our company guarantee a successful partnership with you. We offer a NEW Atlas Copco GA37VSDs FF screw compressor (variable speed, integrated dryer). The machine is equipped with a frequency inverter (variable speed drive) and utilizes the latest technology, resulting in higher efficiency and performance: - On average, 20% lower Specific Energy Requirement (SER) compared to previous GA VSD series models. - The eco-friendly, energy-efficient VSD+ variable speed drive system reduces energy consumption by up to 50% compared to fixed-speed models with idle running. - In addition to energy savings, Free Air Delivery (FAD) is increased by up to 12%. - High-efficiency fan motor (ERP 2015 compliant) reduces both energy usage and noise levels. - The advanced iPM motor delivers efficiency up to 94.5%, exceeding IE3 levels. Engineered to work hard for your success. The best-in-class oil-injected rotary screw compressor from the GA series delivers unrivaled performance, high productivity, and low maintenance costs—even in the toughest conditions. Technical data: - Capacity at 4 bar: 15.69–13.75 l/s / 0.94–7.85 m³/min - Capacity at 7 bar: 15.67–129.35 l/s / 0.94–7.76 m³/min - Capacity at 10 bar: 15.68–110.79 l/s / 0.94–6.65 m³/min - Maximum pressure: 10 bar (13 bar variant available on request) - Voltage: 400 V - Motor: 37 kW - Noise: 67 dB(A) - Weight: 616 kg - Internal permanent magnet motor (IPM) Guedpfewlp Hdox Apyoh - Compression element - Direct drive - Innovative fan - Durable oil separator/filter - Electronic condensate drain (zero loss of compressed air) - Elektronikon controller - Inlet valve - VSDs module - Manufacturer code: 8153336470 If you are unsure whether this equipment is right for you or cannot find a suitable compressor, CALL US! We will advise you on the proper equipment selection. Visit our complete offer for more information.

Būklė: dilaminuotas dirbtuvėje (naudotas), DOUBLE-SIDED SQUARING AND EDGE BANDING MACHINE – 1st machine in line Edge thickness in rolls (min/max): 0.3 / 3 mm Panel thickness (min/max): 8 / 45 mm Working width (min/max): 236 / 1300 mm Control/Software: ICOS Open Feed speed (adjustable): 10 / 50 m/min No transmission bar (Master & Slave systems) Safety and noise protection cabin SQUARING SECTION (per side): Spray unit (for liquid release agent) Interchangeable milling unit 08.0555 max. 3° (2 x 1 kW) Free position EDGE BANDING SECTION (per side): Gluing unit (Hot Melt + premelter) 04.1570 Pressure zone for edging Edgeband magazine for rolls (compartment no.): 6 Pre-milling unit 08.0555 (2 x 1 kW) max. 3° Milling unit 08.055 (2 x 0.66 kW) 30° + 30 m/min Flush trimming unit 08.517 Spray unit (for polishing agent) Gedpfx Aodh Tfgjpyjuh Buffing unit 08.617-2 (2 x 0.18 kW) Free position

Gamybos metai: 2013, būklė: naudotas, KUKA industrial robot with 6 articulated axes featuring point-to-point positioning. Independent control panel Panel orientation table Barcode scanner on the robot arm Panel feeding system via: * 1 motorized roller conveyor for preloading the panel stack * 1 motorized roller conveyor * 1 motorized roller conveyor for unloading the panel stacks Technical specifications: * Model: KR210-2 * Number of axes: 6 Gusdpfx Aor Am Sqjpyeh * Permissible rated payload: 210 kg * Machine weight: 1267 kg * Sound level: 75 dB * Installed power: 25.8 kW * Panel dimensions – min./max. length: 300/3000 mm * Panel dimensions – min./max. width: 180/1500 mm * Panel dimensions – min./max. thickness: 8/60 mm * Maximum panel weight: 90 kg

Gamybos metai: 1999, būklė: geras (naudotas), Biesse Polymac ERGHO 5 Edge Banding Machine, Year of Manufacture: 1999 Biesse Italy S/N 80709 Maximum panel thickness: 10–45 mm Minimum and maximum edge band thickness: 13–60 mm Maximum edge banding material thickness (in rolls): 0.4–3 mm Minimum panel width: 50 mm Minimum panel length: 150 mm Feed speed (m/min): 10/20 Technical specifications: • Glue pot VC 700 • End trimming unit 701 • Edge trimming unit RS 700 • Corner rounding unit CR 200 • Tilting edge trimming & chamfering unit RI 700 • Compact scraper blade RBK501 • Buffing unit SP700 • Edge sanding unit LV 700 Additional features: • Heated infeed guide • PLC control • Panel support guide • Large diameter roll holder • Edge trimming device for 3 mm thick roll edges 400 V, 50 Hz CE marked Gsdpfsgtx Aqjx Apyeuh Machine dimensions (L x W x H): 4950 mm x 1700 mm x 1530 mm Weight: 2,900 kg

Gamybos metai: 1996, būklė: labai geros būklės (naudotas), Automatic slot mortising machine with two tables and oscillating ends BALESTRINI 2CAP Maximum tenon length: 120 mm Maximum mortising depth: 80 mm Spindle speed: 9,000 rpm Spindle motor: 3 Hp Oscillation motor: 1 Hp Pneumatic workpiece clamping Overall dimensions: 1000 x 900 x 1250 mm Weight: 500 kg Gujdpfogmucpox Apysh

Būklė: naudotas, mašinos/transporto priemonės numeris: 007649, Maks. apdorojimo plotis: 600 mm Gujdpfx Apsu Eviqoyoh Klijų sistema: EVA

Būklė: naujas, • Arbeitsbereich 3300 mm X, 200 mm Y, 180 mm Z • 1 x vertikale Elektrospindel 7 kW mit Säge • 1 x vertikale Elektrospindel 7 kW, 12–18.000 U/min • 1 x Elektrospindel 1,7 kW mit Punkt-zu-Punkt-Bohraggregat (vertikal/horizontal) • 1 x horizontale Elektrospindel 5,6 kW, 12–18.000 U/min • 4+4 Werkstückauflagen, verfahrbar auf der X-Achse, jeweils ausgestattet mit verstellbaren pneumatischen Werkstückspannern • Linke und rechte, einziehbare Werkstück-Referenzanschläge • Separater Schaltschrank mit Handbediengerät zur Maschineneinrichtung • Einfache parametrische Programmierung mit 3D-Bearbeitungsmodellen • Umfassende Sicherheitseinhausung mit Fronttüren, vertikale Öffnung, synchronisiert mit dem Maschinenzyklus Godpfx Apen Nv S Tsyouh

Būklė: labai geros būklės (naudotas), SINGLE-SIDED FLEXIBLE EDGE BANDING MACHINE INSERT FOR LOT 1 Edge thickness in rolls (min/max) mm 0.3 - 3 Panel thickness (min/max) mm 8 - 60 Control ICOS open Feed speed m/min (adjustable) 7-35 Gjdpfx Aoifnzdopyeuh Top pressure belt driven, spraying unit (for liquid anti-adhesive) Adjustable stop ruler CNC controlled. Panel infeed system A2 / 30 Jointing milling unit with CNC-controlled 75.34 (2 x 6.6 kW) Gluing unit (P.U.R. glue + pre-melter) 2 - VTG 3-48 + 286.205 Edge pressure zone. Edge height adjustment – CNC controlled. Edge magazine for rolls (compartment no.) 48 End trimming unit 08.42 / 30 / B (0.66 kW x 2) (PNEU 0°-25°) 30 m / min Pre-milling unit 08.0555 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 2) 4 PROFILES Sprayer unit (for sliding fluid) Contour milling unit (for fine milling) CNC controlled KFA x30 (0.5 kW x 1) 30 m/min Multi-profile scraper unit (CNC controlled) 08.516 (4 PROFILES) Flat scraper unit 08.521 (CNC controlled) Sprayer unit (for polishing fluid) Buffing unit 08.617 (0.18 kW x 4) No. 3 Universal milling units (CNC controlled) for grooving/rebating and profiling 08.190 (4.5 kW x 2 + 6.6 kW x 1)