Atraminė plokštė

Stahl 505/510/H50 mm

Būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, Gamintojas: LORENZ Tipas: S8/630 Ratlankio skersmuo: 630 mm Ratlankio plotis: 180 mm Didžiausias modulis: 8 Serijos numeris: 12371 Galia (kW): 10 Matmenys (I×P×A mm): 3000 × 2500 × 3500 Svoris (kg): 5500 Maks. ruošinio skersmuo (mm): 630 Maks. modulis: 8 Dabartinė būsena: veikianti Dsdpfx Aajxakzpohecd

Būklė: naudotas, Cup Grinding Machine Manufacturer: Gustav Brueckner Model: FSH 1 Maximum distance: Table to grinding wheel 200 mm Table size: 315 x 135 mm Dedpfx Aaecv Tb Dohocd 380 Volt 0.75 kW 1.85 Ampere Required space: D.650 x W.600 x H.1600 mm

Būklė: paruoštas naudoti (naudotas), Number of tool stations: 25, max. spindle speed: 6300 rpm, taper: SK40 with DIN 7388 drawbar, connected load: 35 kVA, control: Deckel Maho MillPlus, operating/spindle hours: 56,344 / 14,965 h, equipped with chip conveyor and 600 l coolant tank, supplied without tools and clamping devices. Dsdpfx Aolbmtneahocd

Gamybos metai: 1960, būklė: visiškai atnaujintas (naudotas), mašinos/transporto priemonės numeris: 1733, Vertical internal broaching machine with index plate by Karl Klink Type: RSI10DT Machine No.: 1733 Year of manufacture: 1960 Weight: 4.9 t Broaching force: 10,000 kg Equipped with index plate (2 stations) Dedpfx Aegyd S Seahecd Power supply: 380V / 50Hz Rated current: 35 A Connected load: 7.5 kW The machine has been fully overhauled and is therefore in very good condition.

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2023, veikimo valandos: 444 h, keliamoji galia: 2 500 kg, kėlimo aukštis: 5 850 mm, kuro tipas: dyzelinas, statybinis aukštis: 1 920 mm, tuščias svoris: 4 800 kg, pavaros tipas: Diesel, statybos plotis: 1 810 mm, Telescopic Handler Fixed Load Centre: 500 Technical Condition: very good Front Tyres Type: Pneumatic Front Tyres Size: 12-16.5 Front Tyres Condition: 80 - 100% Dcedpfov Ntfysx Aahod Rear Tyres Type: Pneumatic Rear Tyres Size: 12-16.5 Rear Tyres Condition: 80 - 100% Battery Voltage: 12V Image for illustration purposes only – Fork carriage – Interior rear-view mirror – Radio antenna – Radio pre-installation – Information on additional hydraulic function – JSM tilt-cutoff – Sun visor front roof window – Rear-view mirror at the rear of the machine – Roof window wiper – Power cable 95mm – Engine heater – Diesel preheater – EU specification – Easy Link STD module 3rd valve, rear working lights, front working lights, particulate filter, full cab, CE certificate,

Gamybos metai: 1999, būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Manufacturer: Arthur Klink Year of manufacture: 1999 Type: Horizontal Broaching Machine Model: RIW 10x1600x400 Weight: 2,700 kg General / Technical Data: Horizontal hydraulic internal broaching machine in near-new condition, equipped with a tool lift system, ideal for the use of flat broaching tools. Broaching stroke: 1,600 mm Tensile force: 10,000 kg (100 kN) Tool holder in drawbridge: Ø 85 mm cylindrical Through-hole in clamping table: Ø 100 mm Workpiece diameter: max. 400 mm (limited by the machine body of the tool tray) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Machine dimensions (W x D x H): approx. 6,400 mm x 1,450 mm x 1,600 mm (without working area) Power supply: 400 Volt, 50 Hz Connected load: 9 kW Equipment: • The machine has an electric control for the broaching stroke movement with both manual and automatic operation. • Integrated coolant/lubrication system • Tool lift system for flat broaching tools (no automatic feed) • The broaching slide with pull head holder is equipped with flat guides on both sides Djdpfsr A Hcbjx Aahjcd Accessories: • 1 universal pull head for flat shanks from 3 mm up to max. 25 mm width and a maximum tensile force of 10 kN (10,000 kg) • Complete machine documentation, including CE declaration of conformity Remarks: The machine is ideal for manufacturing keyway slots. Thanks to its robust machine bed and the integrated tool lift system, it is especially well-suited for quick and easy use of flat broaching tools. The machine has had very limited use and is in near-new condition. The machine is available for inspection at our warehouse and can be demonstrated under power. Our direct contact details and further information about the machine can be found in the attached PDF document.

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, bendras ilgis: 5 000 mm, bendras plotis: 1 200 mm, bendras aukštis: 820 mm, bendras svoris: 760 kg, galia: 2,2 kW (2,99 AG), įėjimo įtampa: 400 V, Įranga: Tipinė plokštelė prieinama, avarinis stabdymas, dokumentacija / vadovas, Pritaikymas ir nauda klientams: ASCO CB 5000 idealiai tinka statybų aikštelėms, perdirbimo įmonėms, sijojimo linijoms ir kompostavimo darbams, užtikrinant efektyvų, nepertraukiamą ir saugų birių medžiagų, tokių kaip gruntas, žvyras, smėlis ir kompostas, transportavimą. Vartotojai vertina lankstų įrenginio pastatymą, patikimą veikimą kasdienėje eksploatacijoje bei greitą perkėlimą keičiantis projektų poreikiams. Dcsdpfx Aswynareahod Pagrindinės savybės: • Reguliuojamas konvejerio kampas ir juostos įtempimas • Modulinė konstrukcija su galimybėmis ilginimui • Greitas montavimas ir lengva perkėlimas • Integruotas valandų skaitiklis techninės priežiūros planavimui • Tvirta konstrukcija nepertraukiamam pramoniniam naudojimui Techniniai duomenys: Ilgis 5,0 m · Plotis 1,2 m · Aukštis 0,82 m · Juostos plotis 0,6 m · Našumas 20–110 m³/h · Greitis 10–135 cm/s · Variklis P 2,2 kW / 400 V · Bunkerio talpa 0,2–0,5 m³ · Bunkerio ilgis 0,8–1,6 m · Svoris 760 kg

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, lazerio galia: 30 W, aušinimo tipas: oras, bendras plotis: 60 mm, bendras aukštis: 1 660 mm, bendras ilgis: 80 mm, bendras svoris: 80 kg, The universally applicable laser marking system LAS 28 from Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. The integrated fiber laser allows you to mark almost all materials, such as steel, carbide, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50 Watt fiber laser. Laser marking is necessary in many industries for permanent labeling. The powerful laser software makes it possible to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks, even without extensive programming knowledge. The software can automatically increment serial and article numbers after initial setup. In addition, the software can extract data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer them to predefined fields. The use of a hand scanner is also possible. Standard equipment includes a laptop with mounting bracket and Windows operating system. Optionally, the LAS 28 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Additional options, such as side extensions for marking long parts, are also available. Made in Germany • Fiber laser 30W (optionally 20 Watt or 50 Watt) • Wavelength 1064nm • Marking field size 150x150mm (optional: 200x200) • Optional: rotary axis (3-jaw chuck) • Optional: digital height measuring system • Optional: extraction system (incl. activated carbon filter) • Optional: autofocus system – automatic focus distance determination • Signal light for operating status display • Marking software EZCAD (additional laser software optional) • Pilot laser (simple preview, contour preview) • Focus finder (easy focus adjustment) • Max. workpiece height approx. 270mm • Electrically adjustable Z axis (work level setting) • Aluminum profile frame • Connection 230V Dcedpjunh Hrjfx Aahed • Air-cooled • Laptop with Windows operating system • Dimensions: 800 x 600 x 1660mm (LxWxH) • Weight: approx. 80 kg

Būklė: labai geros būklės (naudotas), Gamybos metai: 2018, CNC Control: Fanuc Series Oi-MF As-new condition, only 150 spindle hours - Box ways - Gear stage - Internal cooling - Various tool holders and 1x machine vice Travels X-axis travel: 850 mm Y-axis travel: 530 mm Z-axis travel: 530 mm Dcodpswa Ip Hefx Aahod Spindle nose to table surface: 100–630 mm Spindle axis to column surface: 590 mm Table Table size: 530 x 950 mm Maximum table load: 800 kg T-slots (W x NO. x P): 18 x (5) x 100 mm Spindle Spindle speed: 8,000 rpm Spindle taper: BT-40 Spindle power: 7.5 / 11 kW Feed Rates Rapid traverse rate: 20 / 20 / 20 m/min Cutting feed rate: 1 – 10,000 mm/min Automatic Tool Changer Number of tools: 24 Tool taper: BT-40 MAS Pull stud: P-40T (45°) Max. tool diameter: Ø 80 mm Max. tool diameter (adjacent station empty): Ø 150 mm Max. tool length: 250 mm Max. tool weight: 7 kg Tool change time (tool to tool): 2.5 sec Tool change time (chip to chip): 6 sec Machine Dimensions Footprint: 2,450 x 2,700 mm Machine weight: 6,000 kg Max. machine height: 2,900 mm Air supply connection: 7 kg/cm²

Būklė: naujas, Thread diameter M3 - M12 metric Continuously variable speed 400 rpm Djdjhiptcspfx Aahecd Operating pressure 6 - 8 bar Max. working range 1100 mm Weight 15 kg Dimensions (LxWxH) 700 x 280 x 200 mm Pneumatic Tapping Machine Design with adjustable angle, horizontal tapping possible Pneumatic tapping machines for M3 - M12 threads, adjustable angle. 8 pcs quick-change chucks with slip clutch. Documentation in English! Optional: Mounting table with T-slots, type: FL-WB