Stäubli TX2-90

Stäubli TX2-90

Sąlyga: geras (naudotas), Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, bendras svoris: 730 kg, keliamoji galia: 14 kg, rankos pasiekiamumas: 1 000 mm, ROBOTIC ARM Payload: 14 kg Maximum reach (between axis 1 and 6): 1000 mm Repeatability – ISO 9283: ±0.03 mm ROTATION UNIT Maximum rotation angle: 350° Safe positions: 0° / ±90° / 180° Ndedpfx Aetqmihjbajd DRIVE UNIT Maximum speed: 16.8°/s Tool storage station: 4 tools per station Tool changer system: MPS032 Maximum speed: 0.6 m/s Platform positioning accuracy: ±10 mm, 1° Dimensions (without robotic arm): 890 x 1120 x 1000 mm (W x H x D) Number of laser scanners: 3 (360° monitoring area) Height of scan plane (personnel safety): 150 mm Drive type: Differential drive COMPLETE SYSTEM Navigation: Based on laser scanner data Protection rating wrist / arm / complete system: IP67 / IP65 / IP20 Maximum average ground pressure: 10 N/mm² Power supply: 1 x 230 V / 16 A Interfaces: WLAN, LAN, Fieldbus (1) Multi-coupling: Compressed air, power supply, 2x Cat5e, 26 x 1 mm² contacts Battery capacity: 5.8 – 8.7 kWh Compressed air tank: 0.75 l (2) / 7 bar Optical and acoustic effects: 4 LED units, storage for up to 16 audio files Weight: 730 kg

Gamybos metai: 2020, Sąlyga: naujas, Touch to Delete ROMER cabins are equipped with 4-inch color touch lights. The cabin control system is intuitive and available with three operating modes: automatic (intermittent), automatic (via plug-in filter cartridge), or manual. Filter Cartridge Sensor The cabins are fitted with a sensor that collects the filters for cleaning when they become clogged. The system also notifies when filters need to be replaced. Automatic Filter Cleaning The electronic automatic filter cleaning system controls both the cleaning frequency and burn-off timing. Each filter is cleaned individually; filters can also be cleaned manually using compressed air. From experience, we know it is difficult to rely on the operator to clean the filters. Thanks to this system, the operator no longer needs to intervene. Low Noise Level Aluminum fans operate very quietly at a noise level of 74–79 dB, which is not excessive. Nodpfx Aofz I Ehobasdd Even with the standard cabin design, it is difficult to conduct a conversation near the fans. Squirrel-Cage Blower Cabins fitted with overhanging squirrel-cage blowers improve operational efficiency and free painters from having to move units manually. Design can be reserved in advance. Explosion Protection The remaining cabins are designed to prevent the build-up of explosible mixtures during the painting process. Every component has been carefully selected to minimize this risk.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2020, veikimo valandos: 550 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: F/20/0020976/A/001, Maksimali apkrova: iki 14 kg Darbo spindulys: 1000 mm Laisvės laipsnių skaičius: 6 Pakartojamumo tikslumas: ± 0,02 mm Pneumatinė jungtis: 2 tiesioginės linijos tarp pagrindo ir dilbio 2x 5/2 kelio bistabilūs magnetiniai vožtuvai (suslėgtas oras) Elektrinė jungtis prie rankos: Ndsdpfx Abexck Risajd 17 elektrinių I/O linijų Multibus kabelis rankoje: 13 elektrinių linijų, 4 Multibus Cat5e linijos, DIN M12 Standartai ir apsaugos klasės: Švarių patalpų standartas – ISO 14644-1: 5 lygis Apsaugos klasė (riešas): IP65 / (IP67 su perteklinio slėgio įtaisu) Saugumas: iki SIL3-PLe klasės (Bendradarbiavimas su žmonėmis: / Saugus ribotas greitis, Saugus sustojimas, Saugus plotas, Saugus įrankis) Valdymas ir licencija: CS9 valdymas su VAL3 licencija Maitinimas: 400-480V 50/60Hz Jungiamumas: UPC UA / IP67 EtherCat I/O moduliai papildomai įrangai įjungti, uždaras Ethernet Cat5e keliems griebtuvams, kamerai ir jutikliams Horizontalus kabelio išėjimas

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2008, veikimo valandos: 9 965 h, - NAUDOTA - 3 AŠIŲ VERTIKALIOJI APDIRBIMO CENTRAS SU ROTO PALETĖMIS X AŠIES EIGA: 560 mm Y AŠIES EIGA: 400 mm Z AŠIES EIGA: 570 mm ATSTUMAS NUO VELENO IŠĖJIMO IKI STALO: 210 - 780 mm GREITIEJI PERVEDIMAI X-Y-Z: 40 - 40 - 32 m/min VELENAS: 80-10000 aps./min; 15-18,5 kW; ISO 40 - BT PALETĖS: 2 vnt.; 712x475 mm MAKS. LEIDŽIAMA APKROVA: 300x2 kg AUKŠTO SLĖGIO AUŠINIMAS: 15 bar ĮRANKIŲ MAGAZINAS: GRANDININIS TIPAS; 32 vietos Ndedpfx Asq Nqkxebajd MAKS. ĮRANKIO SKERSMUO: 90(150) mm MAKS. ĮRANKIO ILGIS: 300 mm MAKS. ĮRANKIO SVORIS: 8 kg VALDYMO BLOKAS: FANUC 21i - MB SVORIS: 7600 kg BENDRI MATMENYS: 3010 x 3450 x 3145 mm

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, garantijos trukmė: 6 mėnesiai, įėjimo įtampa: 400 V, Sertifikuota DGUV iki: 12/2026, bendras plotis: 1 380 mm, bendras ilgis: 950 mm, bendras aukštis: 1 980 mm, įėjimo dažnis: 50 Hz, bendras svoris: 258 kg, elektrinė saugiklis: 32 A, galia: 21 kW (28,55 AG), Hobart universali indaplovė XL Nodpjwmvz Dofx Abaedd Modelis: UXTLS - Krepšelio dydis: 1140 x 680 mm - Įdėjimo aukštis: 850 mm - Paprastos 3 programos su spalvotu indikatoriumi - Nutekėjimo siurblys - Ploviklio dozatorius - Skalavimo priemonės dozatorius Matmenys: 1380 x 950 x 1980 mm (PlxGxA) Jungtis: 400V, 32A CEE kištukas Naudota mašina, išvalyta Pasirinktys: Pristatymo paslauga Vandens filtras Priežiūros sutartis Serviso paketas Instruktavimas ir paleidimas Čia pas mus rasite savo indaplovę!

Gamybos metai: 2002, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: SIKBK, DEMAG KBK Crane System, Crane Runway approx. 10x6m Load capacity / lifting capacity: 500 KG (0.5 t) Technical data of the system: Crane runway made of Demag KBK2 rails System comes complete: KBK rails, rail connectors, trolleys, end plates, cable trolley, brackets/suspensions, etc. Incl. Demag DK2 500KG chain hoist Nodpfx Ajmqf Nbebaodd Crane is dismantled and immediately available Used condition, see pictures Item location: 75053 Gondelsheim Shipping via freight forwarder or collection by appointment only Demag KBK1, KBK2 and KBK3 rails available in stock! Other KBK systems also in stock. Load capacities from 125KG to 1600KG Please inquire about your crane runway specifying cantilever and dimensions.

Sąlyga: naudotas, Gamybos metai: 2008, Article: Vertical Turning and Grinding Center Make: EMAG Model: VSC 250 DS Year of manufacture: 2008 Control unit: SIEMENS 840D Grinding spindle speed: 30,000 rpm Turning spindle speed: 3,000 rpm Ndedpfx Aoia Rtdsbaod Turret tool stations: 12 Cooler for spindle and machine bed cooling Coolant lifting station (no independent coolant supply) Chip conveyor Parts handling Air through the spindle Two clamping circuits through the spindle (air and oil) Unfortunately, the grinding spindle is defective. However, it can be overhauled at a spindle repair shop. Otherwise, the machine is in very good condition and fully functional. Please contact us for further information and pictures via mail(at) or

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2016, Turning-milling center Takisawa TMM 250 3, year 2016, Fanuc Turning length: 1300 mm Turning diameter: 350 mm Max. spindle speed: 4000 rpm 9 axes 2 x spindles 2 x C-axis Swing diameter: 780 mm Max. turning diameter: 350 mm Ndodpfxert Ip Ns Abasd Max. turning length: 1,300 mm Chuck diameter left: 250 mm Chuck diameter right: 200 mm Upper tool turret with Y-axis (260 mm travel) and B-axis (230° / +/- 115°) Complete with 30-station tool changer Lower tool turret: 15-position turret – all positions driven Full simultaneous 5-axis machining with turning/milling support. Tool changer with 30 tool stations Workpiece magazine, right side of the machine, with gantry handling Driven tools on the turret. C-axis for left and right spindle Chip conveyor Internal coolant supply through milling spindle, 20 bar Due to high administrative expense (customs regulations), we do not deliver to Turkey, Iran, Russia, or Belarus.

Sąlyga: geras (naudotas), Robotas Nsdpsbrhtdefx Abaedd Gamintojas: Staeubli Tipas: RX170 251125ä

Sąlyga: naudotas, Gamybos metai: 2020, Technical Details: Swing Diameter: 670 mm Turning Length: 1540 mm Control: F31iB5 Celos Fanuc 35iB5 Maximum Swing Over Bed Cover: 700 mm Travel Paths Turret No. 1 (Milling Spindle) x/y/z: 495 / ± 150 / 1562(+164) mm B-Axis Rotation: -30° / +210° Rapid Traverse Turret 1 (Milling Head) x/y/z: 40/40/40 m/min Milling Spindle Speed: 12,000 rpm Drive Power - Milling Spindle: 20.2/18.8 kW Milling Spindle Torque: 120 / 44 Nm Tool Interface Milling Spindle: Coromant Capto C6 Tool Magazine for Milling Spindle (Turret 1): 76 Tool Change Time Tool/Tool Milling Spindle: 1.25 s Spindle 1 Speed: 3,000 rpm Spindle 1 Power: 36 / 30 / 25 kW C-Axis Spindle 1: 0.001° Bar Capacity Spindle 1: 102 mm Spindle 2 Speed: 4,000 rpm Spindle 2 Power: 26 / 22 / 15 kW C-Axis Spindle 2: 0.001° Bar Capacity Spindle 2: 80 mm Space Requirement approx.: 7.8 x 3.6 x 2.9 m Linear Glass Scales on Axes: X, Y Programmable Steady Rest: KLU-A530 & SLU-X3.2 Accessories: Chip Conveyor Tool Measurement Ndedpswl Ag Dofx Abaed Spindle Load Monitor Air Blow System Air Blow System via ICS System to the Tool Spindle 1 Power Chuck Kitagawa 250 (B 210) mm Spindle 2 Power Chuck Kitagawa 250 (B 210) mm Interface for Internal Coolant Supply 70 bar Tailstock Specification for Sub Spindle Workpiece Measurement with Renishaw OMP60 Probe Detachable Handwheel Workpiece and Total Counter Three-Color Signal Lamp Robot Interface Matris Robot System R-2000iC/165F Automatic Door Rotoclear Viewing Window Fast Clamping Cycles Program Restart Four-Color Signal Lamp Ethernet I/P Interface Manual Tool Measuring Arm Automatic Door Oil Mist Separator Oil Skimmer Spindle Probe for Workpiece Measurement External Air Blow System for Sub Spindle Spindle 1 Coolant Nozzle Spindle 2 Coolant Nozzle Coolant Gun Internal Coolant Supply 70 bar with Knoll Filtration Very high-quality CNC turning-milling center equipped with sub spindle, which can also be used with tailstock function. The machine has an automatic door and Matris robot system type R-2000iC/165F.