Faneros presas

SORMEC 350X130

Būklė: naudotas, Velenų skaičius: 10 vnt. Darbinis plotis: 230 mm Obliavimo aukštis: 160 mm Pavaros variklis: 5,5 kW Pavaros greitis: 6-36 m/min. Weinig Unimat 23EL obliavimo ir profiliavimo automatas – skirta medienos keturpusiam obliavimui ir profiliavimui, su mobiliu velenu automatiniam reguliavimui ir griovelio stalu trumpiems bei lenktiems ruošiniams, taip pat su ilgu tiesinimo stalu. Velenas 1: apačioje / 5,5 kW / 40 mm Velenas 2: dešinėje / 11 kW / 40 mm Velenas 3: kairėje / variklis bendras su 2-uoju velenu / 40 mm Velenas 4: dešinėje / 11 kW / 40 mm Velenas 5: kairėje / 5,5 kW / 40 mm Velenas 6: viršuje / 11 kW / 40 mm Velenas 7: apačioje / 11 kW / 40 mm Kedew H Iv Tjpfx Agfjlp Velenas 8: viršuje / 7,5 kW / 40 mm Velenas 9: apačioje / 7,5 kW / 40 mm Velenas 10: universalus / 4 kW / 40 mm

Būklė: nepatikrintas (naudotas), Gamybos metai: 1991, Torwegge multirip saw Chain width: 250 mm Kodoucnukspfx Agfolp Cutting height: 100 mm Total connected load: 39 kW

Gamybos metai: 2003, būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, Drying chamber Manufacturer: Mühlböck Model: ZLSM Year of manufacture: 2003 Internal dimensions approx. 7400 x 4500 x 4250 mm (LxWxH) 3 fans, each 3 kW 10 measuring points With frequency converter With control system Kljdpfewr Tzfex Agfop Heating capacity: 223 kW Water temperature: 85°C Water flow rate: 14 m³/h Voltage: 230/400 Volt Connected load: 12 kW Fans: 3 x 3 kW Control unit: MB Intellevent 5000 program

Būklė: geras (naudotas), Throughfeed line for door leaf processing, high-performance machine capable of processing a single door leaf (lock case, handle, and hinges) in approximately 30 seconds. Ksdpeuq Scpjfx Agfolp The machine consists of two units, each equipped with left and right sections that perform specific operations. In the first unit, the left section mills the faceplate for the lock and drills for the handle and key, while the right section simultaneously drills for hinges. In the second unit, the left section creates and deepens the lock case pocket, while the right section simultaneously screws in the hinges.

Būklė: geras (naudotas), Kodas: 0136 Prekės ženklas: ITALPRESSE Modelis: FORMATIC 20.9 Hidraulinė membraninė presas Dvipusis lukšto laminavimas prie vienoje pusėje profiliuotų, kitoje - lygių plokščių, skirtų spintelių fasadų, stalčių priekinių panelių, rašomųjų stalų paviršių, valgomojo stalų ir virtuvės paviršių gamybai. Trimatė (3D) plastikinių folijų (PVC, PPE, ABS, transferinė folija) laminacija prie vienoje pusėje profiliuotų plokščių, gaminant: spintelių fasadus, stalčių priekines paneles, rašomųjų ir valgomojo stalų paviršius, virtuvės paviršius, prekybinės įrangos komponentus, vidaus duris ir pan. Plokštelės matmenys: 2000 x 900 mm Atstumas tarp plokštelių (daylight): 325 mm Cilindro eiga: 325 mm Elektrinio katilo galia: 27 kW Spaudimo jėga: 300 t Cilindrų skaičius: 3 vnt. Hidraulinės stoties galia: 5,5 kW Slėgio valdymo manometras Automatinis slėgio atstatymas Kledpfepbvqvsx Agfjp Atidarymo laikmatis Bendrieji matmenys: 3300 x 1400 x 2400 mm (aukštis) Svoris: 8100 kg

Būklė: geras (naudotas), Gamybos metai: 1973, Weinig Planing Machine 4-sider / U250 / Unimat 250 Planing width: 250mm Kedpfx Aorigq Sjgfslp Planing height: 120mm Bottom spindle 7.5 kW Right spindle 5.5 kW Left spindle 7.5 kW Right spindle 7.5 kW Top spindle 7.5 kW Bottom spindle 7.5 kW Saw spindle unit 7.5 kW Comes with planing heads Comes with milling tools Comes with knives Comes with complete accessories Good condition – immediately available Location: Austria, near Sankt Pölten

Būklė: naudotas, Weinig Unimat 23 Technical data Working width: 30 - 230 mm Working height: 19 - 200 mm mounted on platform bottom – right – left – top – top/bottom without infeed machine only The machine has been dismantled and is available immediately. Kedpfx Aoncc Igogfslp Transport can be arranged.

Būklė: geras (naudotas), Item: D-1035 Double Bulk Feeder with Portion Weighing Unit. Complete stainless steel construction. Klsdpfx Agjd Nk Ucofop Dimensions: Hopper L 1800 x W 850 x H 1300 mm Lift: 460 mm, Small lift 100 mm, Flight 80 mm L 2700 + weighing unit 500 mm, Total length 3200 mm

Gamybos metai: 1998, būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, Vanicek drying chamber with bolster wagon with entrance and exit gate (double-leaf doors) Ksdpswxdqkjfx Agfolp with control unit and electrical switch cabinet Dimensions: internal length 13.05 m, width 4.00 m, height 2.80 m Fan: VMR 71-05-4, electric motor 1.1 kW/400V Dehumidifier Ø 50 mm, with actuator Dehumidifier Ø 40 mm, with actuator UGL sensors, humidification, heating valve (local supply) Switchgear, heating coil, fan frame Stacking dimensions: 1x12.50 m, 2x1.20 m, 2x1.00 m

Būklė: naudotas, Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, ilgio ribotuvas: 3 200 mm, įrankio skersmuo: 400 mm, ašies skersmuo: 50 mm, spindelio eiga: 640 mm, veleno greitis (maks.): 3 000 aps./min, frezos veleno ilgis: 320 mm, pjūklo disko skersmuo: 400 mm, aukščio reguliavimo tipas: elektrinis, įvesties srovės tipas: Oro kondicionierius, darbinio aukščio: 130 mm, darbinis plotis: 200 mm, SCM Windor 60/100 – Angular Machining Centre Manufacturer: SCM Group Year of manufacture: 2005* 1. General Description of the System This production line is a window and door manufacturing system of the Windor 60/100 type by SCM Group, year 2005. It is a CNC-controlled angular machining centre designed for the industrial processing of frame and sash components. The system is built for serial production and enables precise, repeatable machining in integrated process steps. 2. Main Components of the System 2.1 SCM Windor 60/100 Angular Machining Centre The SCM Windor 60/100 features a modular build and is designed as an angular processing line. Machining is carried out on a tenoning side and a profiling side arranged at right angles to each other. Multiple machining steps such as milling, drilling, grooving, rebating, and tenoning are executed in a seamless CNC-controlled process. Key Features: * CNC multi-sided processing * Multiple milling and machining spindles * Automated tool guidance and tool change * High dimensional and repeat accuracy 2.2 Fleximat Drilling Centre The Fleximat drilling centre is integrated into the system and is used for precise drilling operations for joints and fittings. The drilling is CNC-controlled with vertical and horizontal drilling units. 2.3 Profiler Centre The profiler centre is designed for profiling milling operations and consists of two processing sides: Right Side: * Lifting spindle with adjustable height * For variable profile and contour machining Left Side: * 24-position tool changer * Automatic tool change to minimise set-up times * Suitable for complex profile milling 2.4 Löwer Surface Grinding Machine A surface grinding machine from Löwer is integrated into the line. This machine is exclusively used for surface grinding to improve the surface quality of the machined parts. 3. Control, Operation and Safety The system is equipped with CNC control managing all machining processes, tool changes, and feed and spindle movements. Operation is semi- or fully-automated by trained personnel. Kledpex Nqqxefx Agfep The safety features are compliant with the state of the art at the time of construction (2005) and include in particular: * Mechanical safety guards and enclosures * Emergency stop devices * Safety interlocks on moving machine parts 4. Optional Extension: SCM Topset XL 10-Spindle Planer An extension of the existing machine park is planned with the installation of an SCM Topset XL 10-spindle planer. The machine operates as a standalone work station at a separate location within the production hall and is not directly connected to the CNC control of the Windor system. The system is available and can be dismantled at any time. Dismantling and transport are to be organised by the buyer. Available from: 07.01.2026