Faneravimo pjūklas su obliavimo įrenginiu

Höfer FSP 310

Sąlyga: labai geros būklės (naudotas), Panel cutting saw – horizontal – with rear lifting table Ndodep R Sdhspfx Agwjd MCS Evolution control Software Lifting table (mm) No. 1 Rear pusher Programmable pusher divider No. 9 Clamping grippers Max. cutting width (mm): 3300 Pusher effective stroke (mm): 3300 Max. saw blade projection (mm): 105 Max. clamping gripper opening (mm): 105 Scoring saw (max. saw blade diameter) mm: 200 Main saw (max. saw blade diameter / power) mm: 360 – 18 kW Adjustable saw carriage feed rate (m/min): 5 – 120 No. 3 front air cushion tables Total connected load (kW): 21 (approx.)

Gamybos metai: 2001, Sąlyga: naudotas, Max. pressure: 500 t, max. operating temperature: 370°C, oil-heated, oil-cooled, with secondary circuit for heat recovery, overhauled in 2014. Nedpfx Aedwf Dbjgwodd

Sąlyga: naudotas, WRAVOR WRC 1050 AC – Galia, natanumas ir patikimumas medienos apdirbime Ieškote juostinio pjūklo, kuris derina galią, tikslumą ir efektyvumą? WRAVOR WRC 1050 AC suteikia visa tai – ir dar daugiau! Šis horizontalus juostinis pjūklas sukurtas profesionaliems medienos apdirbėjams, bet yra patikimas ir universalus sprendimas net ir mažesnėms dirbtuvėms. _____ Svarbiausi privalumai: Aukštas efektyvumas: Išskirtinis našumas – pjovimo pajėgumas iki 30 m³ per 8 valandų pamainą, minimali energijos sąnauda ir nedidelės priežiūros išlaidos. Tikslus pjovimas: Dėl pažangios technologijos ir stabilios konstrukcijos WRAVOR WRC 1050 AC užtikrina švarius, tikslius pjūvius – net ir apdorojant sudėtingiausias medienos rūšis. Paprastas valdymas: Nsdpfxowfq Naj Agwodd Intuityvūs valdikliai, greitas įrengimas ir lengvas reguliavimas šį pjūklą paverčia idealiu tiek pramonės įmonėms, tiek individualiems meistrams. Universalumas ir ilgaamžiškumas: Pagaminta iš aukštos kokybės medžiagų, ši mašina geba apdoroti įvairias medžio rūšis – nuo minkštos iki kietos, masyvo ar kompozito. Išmani technologija: Inovatyvi valdymo sistema automatiškai prisitaiko prie skirtingų darbo sąlygų, taupo laiką ir resursus. Ekologiškas ir energiją taupantis: Mažos energijos sąnaudos leidžia sumažinti eksploatacines išlaidas ir prisideda prie aplinkos tausojimo. _____ Techninės specifikacijos: • Modelis: WRC 1050 AC • Variklio galia: 30 / 37 / 45 kW • Pjovimo našumas: iki 30 m³ / 8 val. • Didžiausias rąsto skersmuo: Ø 1050 mm • Pritaikymas: pramoninis medienos apdirbimas, staliaus darbai, padėklų, sijų, masyvo ir kitų gaminių pjovimas _____ WRAVOR WRC 1050 AC – Jūsų partneris kiekviename pjūvyje! Daugiau informacijos ar kainos pasiūlymą gaukite susisiekę su mumis šiandien.

Sąlyga: paruoštas naudoti (naudotas), Caractéristiques techniques • Pression : 2,2 kg/cm² • Chaudière à huile diathermique de 18 kW • Pressage temporisé Nedpfx Ast N Autsgwjdd • Affichage digital Puissance et moteurs • Tension : 400 V • Raccordement : Triphasé • Puissance : 20 kW Dimensions hors tout • Longueur : 3 500 mm • Largeur : 1 500 mm • Poids : 3 200 kg

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 008018, Uždedamos briaunos tipas: plona briauna, stora briauna, masyvi mediena Klijavimo sistema: EVA, PUR Sujungimo frezavimas: taip Ndjdpfjwv Dfcox Agwjd Multifunkcinis agregatas: taip Maks. padavimo greitis: 20 m/min Maksimali plokštės storis: 60 mm Darbiniai agregatai: 7 vnt.

Sąlyga: naudotas, Gamybos metai: 2009, HOLZ-HER Edgebander CONTRIGA 1366 Edge thickness: 0.4–30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6–45/60 mm (depending on equipment) Edge types: Coil and strip material Feed speed: Infinitely variable feed from 12–30 m/min (depending on equipment) - With adjustable infeed table in the magazine area (max. adjustment range 30 mm) - With height-adjustable magazine disc for modifying the lower edge overhang - Large magazine disc Ø 820 mm for edge coils up to Ø 800 mm - With transport chain incl. automatic central lubrication - With motor-driven, position-controlled bridge height adjustment - With pneumatic stop roller for shortest workpiece spacing - With extendable workpiece support (extension length 1600 mm) - With space-saving, pneumatically operated sliding hoods over the entire machine (deviations possible on individual aggregates) - With motorised infeed fence - With spray oiler for lubricating all joints and bolts (including operating hour counter) - With central connection for extraction (2x Ø 200 mm) - With integrated chip collection box at the end of the machine (when radius scraper unit installed) Control PPC 231 - Power PC for efficient setup and tool changes - 15” SVGA touch screen - CF memory card 128 MB - USB port on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - All information in clear text and/or graphics - Rotatable and swivelling operator console at eye level - Dust-proof membrane keypad with soft keys (pushbuttons) - LED indicator for aggregate preselection Ndsdpfx Agjvvkfdowed - Program list with program names and numbers - Extensive program memory - Individual selection of aggregates with functions for basic settings, set point values, position points, and tool corrections, as well as fixed position points - Setup operations for aggregates and axis settings centrally and clearly via fine adjustment (depending on equipment) - Interval display for minimum workpiece distance - Integrated position control - Position points generally or program-specifically controlled - Clear and complete capture of all operating data - Service messages in plain text - Diagnostic system - Incl. integrated synchronous bus system for high accuracy in aggregate control - Individual management for up to ten users, incl. password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASE MACHINE CONTRIGA 1366 – Belt bridge Options and accessories for the base machine Spraying unit 1856 for infeed and outfeed area For the infeed area: Electronically controlled separating agent spray unit with separating agent Riepe-LPZ/II For the outfeed area: Electronically controlled cleaning agent spray unit with cleaning agent Riepe-LP163/93 (only in combination with jointing milling unit 1961 and flat scraper 1964) Jointing milling unit Jointing milling station 1803 (2x 2.6 kW, 200 Hz, 12000 rpm) - With two plunge-controlled milling units - 1 unit counter-rotating - 1 unit co-rotating - Plunge depth 5 mm - With static frequency converter 200 Hz - Without milling cutters - With ProLock screw-in chuck for quick tool change Tooling for 1803 (workpiece height up to 60 mm): Diamond cutters PRO UT, 2 pcs. (front and rear) incl. protective hoods Ø 100–63 - Ø 30 mm, Z = 3 + 3 + 3, 1x LH, 1x RH Noise-reduced cutter with integrated chip guide, DFC technology (Leitz system) Maximum chip removal 2 mm at 60 mm height

Sąlyga: labai geros būklės (naudotas), ONE-SIDED DESTACKING STATION - Upper traverse, horizontally shiftable by 180° - Console table with vacuum clamps - Lift table (internal) with motorized sheet metal roller conveyor - Front safety guard, movable - Separate control cabinet and operating panel - External roller conveyor for transporting the stack of sheets from destacking - External driven roller conveyor from destacking, optionally with belt for 90° transfer of sheets - Operating capacity (cycles/min): 12-15 - Plate thickness (min/max) mm: 10 - 40 Nsdscggy Sepfx Agwodd - Min. plate dimensions mm: 250 x 320 - Max. plate dimensions mm: 1200 x 3000 - Total connected load Kw: 10

Sąlyga: naudotas, Gamybos metai: 2014, Number of spindles: 5 pcs. Working width: 230 mm Planing height: 120 mm Surface table length: 2,500 mm Feed motor: 4 kW Feed speed: 5-30 m/min Control: Memory function Weinig Powermat 600 Compact ----- Machine is cleaned and fully inspected. Brief summary: ----- - 5 spindles - Powerful motors - Left and top spindle controlled for width and height Detailed description: ----- Technical data: Working width: 20-230 mm Working height: 10-120 mm Number of spindles: 5 1st spindle - bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool circle diameter: 125 - 145 mm Tool circle diameter with rebate cutter: 130 - 160 mm Axial adjustment range: 5 mm Rebate device MarathonCoatin for table insert in front of the 1st lower tool holder Electronic digital readout for radial adjustment 2nd spindle - right ----- Motor with brake: 11.0 kW Shared motor with left tool holder Spindle diameter: 40 mm Speed: 6,000 rpm Tool circle diameter 40 mm below table level: 93 - 200 mm Tool circle diameter 55 mm below table level: 93 - 180 mm Tool circle diameter for straight knife cutterheads max.: 163 mm Max. tool diameter behind fence line: 180 mm Max. profiling depth: 35 mm Axial adjustment range: 55 mm 3rd spindle - left ----- Motor with brake: Shared motor with the 2nd spindle Spindle diameter: 40 mm Speed: 6,000 rpm Tool circle diameter 40 mm below table level: 93 - 200 mm Tool circle diameter 55 mm below table level: 93 - 180 mm Tool circle diameter for straight knife cutterheads max.: 163 mm Max. profiling depth: 35 mm Axial adjustment range: 55 mm Radial spindle CNC-controlled 4th spindle - top ----- Motor with brake: 11.0 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool circle diameter: 93 - 200 mm Tool circle diameter for straight knife cutterheads max.: 180 mm Max. profiling depth: 35 mm Axial adjustment range: 40 mm Radial spindle CNC-controlled Ndodpowzmu Rofx Agwsd Divided pressure shoe in front of the top tool holder, adjustable to tool circle diameter and can be swung clear of the tool, spring-loaded. Pressure shoe before and outfeed after top spindle with electronic digital readouts, integrated in the memory function or PowerCom 5th spindle - bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool circle diameter: 93 - 200 mm Max. profiling depth: 15 mm Axial adjustment range: 35 mm Feed system ----- Electronic feed, infinitely variable with brake: 4 kW, 5 - 30 m/min Infeed roller before 1st lower tool, pneumatically controlled up/down. Durofer pointed tooth rollers with depth limiter and self-cleaning. Adjustment range of feed rollers relative to left tool holder, axial 35 mm Machine electrics ----- Operating voltage: 400 V (voltage range 380 - 420 Volts), 50 Hz. All spindles IE 2 version Electrical design according to DIN VDE 0113, electrical equipment of industrial machines EN60204, IEC-204-1. Other electrical standards are not taken into account. Mach...

Sąlyga: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, pjūklo disko skersmuo: 600 mm, OPTIMIZATION CROSS-CUTTING SYSTEM WITH ROTATABLE SAW AGGREGATE CT600 / 6000 – Maximum raw part length: 6,000 mm Cutting dimensions at aggregate position A: At 0°: 200x215 mm, 50x370 mm At 30°: 200x185 mm, 50x325 mm At 45°: 200x150 mm, 50x265 mm At 80°: 200x35 mm, 50x63 mm Cutting dimensions at aggregate position B: At 0°: 160x315 mm, 40x400 mm At 30°: 160x270 mm, 40x350 mm At 45°: 160x220 mm, 40x285 mm At 80°: 160x52 mm, 40x70 mm Minimum workpiece thickness: 10 mm (20 mm with automatic feeding) Support table inclined at 8° Pusher stop on the right Saw unit technical data: Rotatable aggregate complete with table Motor: 7.5 kW, 400 V, 50 Hz TCT saw blade, diameter 600 mm, bore 30 mm, 60 teeth, thickness 5 mm Average cutting cycle: approx. 4 sec. Automatic rotation of the aggregate from -70° to +70° Saw aggregate rotation -80° to +80° available on request Aggregate rotation from 0° to 70° in approx. 1.3 sec. Positioning accuracy: +/- 0.2° Ndodpfx Agev Aub Nswjd Hold-down system consisting of 2 pneumatic cylinders with mounted pressure rail Side pressure plate system with electronic control Pusher system technical data: Feed via rack and pinion system with brushless motor Positioning accuracy: +/- 0.4 mm Feed motor force designed to move a bundle weight of up to 80 kg Maximum feed speed: 90 m/min Pneumatic pusher lift after cycle completion and return at pusher level Control: 12-inch touch screen BECKHOFF professional PC WINDOWS operating system USB port Ethernet port Loading and saving of machine data via USB Cutting programs can be edited directly at the input unit Transfer of cut lists via USB or Ethernet Direct import of .btl (10.4) format files Operating software: Up to 1,000 cutting lists with up to 11 different cut dimensions per list, or 1 list with up to 10,000 different cut dimensions in sequence Cutting cycle with 4 optimization modes (maximum length, minimum waste, sequence, length priority) Graphical display of workpiece Installed options: ZA110 Outfeed table (per meter) ZA040 Saw unit table rotation 80°

Gamybos metai: 2004, Sąlyga: nepatikrintas (naudotas), Working Area and Axis Travel No. 2 worktables each measuring 1,600 x 1,800 mm Total working area with joined tables: 3,220 x 1,800 mm Axis travel: X = 4,300 mm; Y/W = 3,200 mm; Z = 300 mm Z workpiece clearance: 300 mm Vacuum Pumps: Rotating Becker type, No. 2 x 250 m³/h Mechanical structure: Monolithic steel gantry frame with fixed portal, including base, lateral beams, and upper beam, all thermally welded into a single piece and then thermally stabilized. The large-section upper beam, 400 x 400 mm, is constructed with a combined section geometry for extremely high rigidity. Numerical control: Osai with DUAL TFT MONITOR Nedpfehvmwkox Agwedd Industrial Digital OSAI Series 10/510 CNC with integrated second computer: - WINLINK with TeleService - Industrial PC integrated into OSAI control Interactive operator panel - Dedicated color TFT monitor for OSAI CNC - Dedicated color TFT monitor for Windows PC No. 02 Electrospindles: HSD milling routers, bidirectional (CW/CCW) Max speed: 32,000 rpm ISO 30 Special high-speed tool holders Power: - 10.5 kW = 14.5 HP at 18,000 rpm - 10.5 kW = 14.5 HP at 24,000 rpm - 7.0 kW = 9.5 HP at 32,000 rpm Front ceramic bearings Rear ceramic bearings Coolant-based liquid cooling Multi-position step-type suction hood, CNC-controlled Electrospindle floating device Digital electronic inverter No. 01 Setting Axis (patented system) Features an additional independent Z-axis for the operator head no. 2 (left side). Allows CNC adjustment for Z-axis differences between tool lengths, ensuring all tools working on the same piece are compensated. Enables operations requiring mechanical copying of the workpiece in floating mode. No. 02 Rotary arm type tool magazines, each with 10 positions, for rapid and high-performance tool changes No. 02 HSD Boring Heads: Type BH 19 each fitted with 19 tool holders: - 13 independent vertical spindles in a T-configuration: - 5 along X-axis, 32 mm pitch - 8 along Y-axis, 32 mm pitch - 4 horizontal spindles in Y-direction (2+2 opposing) - 2 horizontal spindles in X-direction (1+1 opposing) Installation Data: Footprint approx. 6,950 x 6,700 mm (width x depth) Power supply: 380 V 3-phase at 50 Hz; I = 100 A; P = 59 kW Pneumatic supply: 7.00–7.50 Bar Extraction system: 2 x diameter 200 mm; 30 m/s; at approx. H = 3,200 mm