Sorbini T/20-SP 1 mentelių aplikatorius

Sorbini/Cefla T/20 SP-1

Gamybos metai: 1999, Sąlyga: naudotas, The DSG 200 vertical sawmill is the ideal option for woodworking facilities specializing in furniture and wooden flooring production; it is efficient and performs reliably in operation. A used Wintersteiger mini sawmill is a very sound investment. A major advantage of this machine is that it does not take up as much space as standard equipment of this type, while still excelling in material processing. It is used for cutting individual elements and matching them to the desired sizes. The machine is easy to operate and can be mastered quickly. The greatest asset of our sawmill is its extensive equipment, featuring primarily a blade spraying system controlled from the panel, enabling precise cutting of wet material. It features independent adjustment of the upper rollers’ height, allowing for quicker cutting height settings. Pneumatic feed pusher assists the feed process. TECHNICAL DATA: -Total power: 27.3 kW -Air Jet system motor: 2.3 kW -Siemens control panel -Feed rate up to 2 m/min -Sawmill frame stroke: 210 mm -Strokes per minute: 400 -Cutting height: steplessly adjustable (smoothly) on our frame: 45–250 mm -Maximum achievable cutting height: 400 mm! -Cutting width under side pressure: 80–205 mm -Minimum block length: 250 mm -Lamella thickness: from 1.5 mm – depending on wood type and cutting height -Kerf for used blades: 0.9–1.1 mm depending on cutting height -Length: approx. 5000 mm -Width: approx. 1300 mm -Height: approx. 2600 mm -Weight: 5000 kg Pneumatic feed pusher assists the feed process The machine is supplied with: -Complete large saw blade frame -Small saw blade frame -Frame pins -Frame tensioning wedges -Blade spacers -Blades for wet cutting -Blades for dry cutting -Set of upper feed rollers -4 lower feed rollers -Set of slides -Frame yokes -Pocket cutting guides -Loading magazines -DTR documentation -Electrical diagram Nwedpfxjtvm Hds Aghep

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2020, The machine is in very good condition, has seen little use, and comes with full equipment. Additionally, 20 saw blades included in the set. SPECIFICATION: WRAVOR BAND SAWMILL TYPE 1225 AC (angled cutting) Max. log width: 1250/1090 mm Max. cutting length: 8 m Main motor: 45 kW Cast wheels Cast wheel width: 130 mm Wheel diameter: 1200 mm Raising/lowering – double screw TR60x9 (18) + 11 kW Danfoss inverter + Siemens 3-phase brake motor Electric motor for raising/lowering: 11 kW Blade PV 45 length: 8685 mm, thickness: 1.2 mm, width: 140/150 mm Feed drive with electronic solutions for blade forward/back – SEW reducer with flat asynchronous controller KA87 / GDRL100L 4BE5 / TF / ES7S / V Manual-sensor adjustment of cutting thickness with electric shut-off Digital cutting thickness adjustment with Wravor V280 program Hydraulic unit 40 L, tank with two pumps 13+6 L + 3 kW motor Complete hydraulic system Hydraulic blade guide left and right HIWIN LINEAR Hydraulic pre-cutter / bark scoring cutter: 1 Hydraulic board ejector: 1 Additional hydraulic board ejector and guider Side-mounted control panel Multifunctional joystick with 2 positions: 1 Multifunctional joystick with 4 positions: 1 Laser: 15 mW Cameras: 3 Fan: 2.2 kW + 15 m sawdust duct + 4 pipe supports Water cooling – automatic cooling hydrofor (Aki Tech high-pressure pump): 1 Preparation for ramp and automatic table + spreader: 1 Diesel greasing TRACK Welded construction, 14 m length Hydraulic clamp with two cylinders: 6 Hydraulic log turner: 6 Mechanical supports: 2 Hydraulic roller – forward: 6 Nwodpfjw E Ei Uex Aghsp Hydraulic log lifter on brackets – mechanical roller: 4 Hydraulic log lifter on brackets – hydraulic roller: 7 Set of lifting cylinders: 7 hydraulic + 4 m: 1 Hydraulic turner – new type: 3 Centering device – 1 set: 4 Hydraulic unit 120 L, tank with one pump 50 L, motor 15 kW + Danfoss inverter: 1 Cable carrier with energy chain: 14.5 m C-profile carrier for ventilation – 4 double trolleys Belt discharge conveyor 4 m with 1 m feed segment + electric motor 3 kW, front section with hydraulic lift

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, SMELT professional coating line LED / All machines are used and still in good working condition. Nwjdpfjpyg Itox Aghop

Sąlyga: labai geros būklės (naudotas), ROLLER COATING MACHINE (REVERSE) Max. working width: 1300 mm Total machine length approx.: 1600 mm Integrated control cabinet with operator panel Driven conveyor carpet for workpiece feed (with servo controller, rated power 0.75 kW) Nodpfx Ajidqwpoghewp Feed speed: 6 m/min to 24 m/min Total connected load approx.: 4.1 kW Equipped with 2 working units: * 1st unit (with 2 rollers): Dosing roller made of chrome steel, diameter 174 mm + application roller with rubber coating, diameter 248 mm, both with individual speed controllers (power 0.37 kW + 0.75 kW), including rubber-coated counter roller underneath * 2nd unit (with 2 rollers): Dosing roller made of chrome steel, diameter 174 mm + application roller with rubber coating, diameter 248 mm, both with individual speed controllers (power 0.37 kW + 0.75 kW), including rubber-coated counter roller underneath

Sąlyga: naudotas, Gamybos metai: 1980, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: KME 2/750L, Clamping carriage for saw frame Nwsdpfsv Umb Ejx Aghop Inspection by appointment is gladly possible.

Sąlyga: naujas, No. 3183 Vacuum Dryer / Drying Chamber ISVE ES 3 / NEW New machine, delivery time 120 days Design features: Stainless steel AISI-304, partially insulated Outer diameter: 1300 mm Length of cylindrical section: 5000 mm Dryer length: 5900 mm Total dryer length with rails: 11,000 mm Maximum operating vacuum: -730 mm Hg Timber stack length: 5000 mm Timber stack width: 800 mm Timber stack height: 790 mm Net wood capacity: approx. 2.5 m3 Installed electrical power: 8.80 kW Average hourly power consumption: 4.4 kW/h Included: - 9 electric heating plates (each 800 x 5000 x 10 mm LWH / 40 kg / 0.695 kW) - 1 oil vacuum pump (65 m3/h / 1.8 kW / 380 V AC) - 1 vacuum pump condenser (stainless steel tube with internal condensation system) - 2 internal condensers (turbofan, each 0.37 kW 380 V AC) - 2 check valves (one ¾" for the vacuum circuit, one ½" for the condenser drain) - 1 solenoid valve for air recirculation (24 V AC: one 1" for the autoclave and one ½" for the condenser) - 1 manual air recirculation valve (1" ball valve) Nodpeu Tipkofx Aghowp - 1 electrical control (Siemens S7-1200 PLC type, with touch panel) - 1 ISVE Server Connect with remote maintenance and control - 2 wireless moisture probes (dual probes for core and surface moisture measurement) - 1 wireless temperature probe (for measurement of timber core temperature) - 2 plate holders - 1 operating manual (in English, with CE certificate and circuit diagrams) Transport dimensions approx. 5900 x 1300 x 2000 mm LWH Weight approx. 2000 kg Technical specifications, year of manufacture and scope of delivery according to manufacturer, no guarantee Subject to prior sale For new machines, the manufacturer's warranty conditions apply Images and videos are for illustration purposes and do not represent the actual delivery contents Payment terms: Prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex works

Sąlyga: geras (naudotas), Gamybos metai: 2001, Good, used condition Low operating hours (1,675 h) Motor: 11 kW Throughput up to max. 220 kg/h Briquette: 150x60 mm Dimensions of the press: Nwjdpswcc D Rjfx Aghep approx. 2200x3000x1920 mm (LxWxH) Dimensions of the control cabinet: 500x1250x2120 mm (LxWxH) Weight approx. 3,000 kg

Gamybos metai: 1985, Sąlyga: geras (naudotas), COMPLETE PAINTING LINE WITH THE FOLLOWING STATIONS: 1. COATER FOR WATER-BASED PRIMER 2. OVEN WITH UV + IR LAMPS 3. DOUBLE COATER WITH REVERSE SYSTEM 4. UV LAMPS 5. DOUBLE COATER 6. UV LAMPS 7. DMC SANDER 8. CONVEYOR 9. SORBINI TOUCH-UP STAIN COATER 10. IR LAMPS 11. FINISHING ROLLER 12. UV LAMPS 13. OUTFEED CONVEYOR Nedok Scufepfx Aghowp

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1998, Cutting diameter: 150 mm Cutting range min.: 150 mm Nwjdsvwgnwjpfx Aghop Saw blade diameter: 400 mm Minimum cut length: 420 mm Maximum cut length: 4000 mm Space requirement approx.: 4800 x 1100 x 1500 mm The double mitre saw is in very good condition and has seen very little use.

Sąlyga: naudotas, Gamybos metai: 2013, Venjakob Perfect Paint Finishing Line: - Manufacturer: Venjakob - Year of manufacture: 2013 - Working width: 1,300 mm - Max. workpiece length: 6,500 mm - U-shaped layout with 90° transfer station Comprising: 1. Infeed conveyor, length 3,050 mm 2. Space reserved for a sanding machine (optional) Njdpfju Afu Rjx Aghjwp 3. VEN SPRAY PERFECT spray machine, length 5,510 mm 4. OIR flash-off dryer, length 6,000 mm 5. VEN DRY AIR JET nozzle dryer, length 4,160 mm 6. 180-degree angle transfer with nozzle dryer 7. Supply air unit for angle transfer, 25,000 m³/h 8. VEN DRY AIR JET nozzle dryer, length 5,160 mm 4 infrared emitters 9. VEN DRY AIR JET nozzle dryer, length 5,160 mm 4 infrared emitters 10. VEN DRY AIR JET nozzle dryer, length 5,160 mm 4 infrared emitters 11. 3D UV dryer, VEN DRY UV, GA + HG 12. Discharge area, conveyor of the UV dryer 13. Supply air unit for hall, 30,000 m³/h Further information: On request