Ritė

SOPREM RS-HF 160

Gamybos metai: 1972, būklė: naudotas, mašinos/transporto priemonės numeris: 51512/72, Pressing force: 75 t Cpsdpfxeb Tdquo Aahsw Throat depth: 300 mm Table size: 620 x 800 mm Pass-through hole in table: 225 x 325 mm Table adjustment: 175 mm Ram surface: 180 x 475 mm Ram adjustment: 80 mm Stroke adjustment: 16 - 140 mm Strokes per minute: 90 Drive motor: 380 V, 3 kW Required space: 1700 x 1200 x 2500 mm Weight: 3.3 t

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, - Single-screw extruder - 25/25 L/D screw - Motor: 2.2 kW - Adaptor for flat die 1.0 x 120 mm - With cooling rollers (200 mm wide) - Winder / take-off unit - Control system Cedpfx Aaerg Ebcshspw

Būklė: naujas, Gamybos metai: 2024, mašinos/transporto priemonės numeris: 302340, Ring bending machine Manufacturer: KB Turkey Model: MB 30 Lower shaft: 30 mm Upper shaft: 30 mm 2 driven rollers With base frame for horizontal and vertical operation Csdpfx Aaed S Uf Sohspw Bending capacity: Round tube up to 48 x 3.0 mm Flat bar (upright) 50 x 10 mm Square tube 40 x 40 x 3 mm Weight: 170 kg Motor: 0.75 kW, 400 Volt, 50 Hz, 3 phase.

Būklė: naujas, Pressure: 25 t Throat depth: 200 mm Stroke: 4 - 80 mm Table surface: 520 x 400 mm Stroke rate: 160 strokes/min Ram area: 160 x 160 mm Ram adjustment: 40 mm Ram bore: 32 H7 mm Pass-through opening in table: 200 x 150 mm Clamping plate: 500 x 380 x 60 mm Cjdpfxsb U Hwps Aahspw Total power requirement: 2.7 kW Machine weight approx.: 1.9 t Space requirement approx.: 1.3 x 1.0 x 1.85 m - Pneumatic clutch-brake combination Ortlinghaus - Central lubrication system Vogel - Cam switch gear Balluff - Height-adjustable table - Control cabinet with touchscreen - Foot switch

Gamybos metai: 2023, būklė: beveik kaip naujas (naudotas), Our compact extruder model EX20-25d Manufacturer: PMH GmbH Screw diameter [mm]: 20 Screw length [L/D]: 25 Screw speed [min⁻¹]: 10–192 Screw: nitrided Torque: 55 Nm Drive: Three-phase motor with frequency inverter Drive power [kW]: 1.1 kW Cylinder material: nitrided Electrical connection: 3 / N / PE Supply voltage [V]: 400 V at 50 Hz Cpsdpfx Aajq R Tkwshjw Control voltage [V]: 24 V Ceramic heating bands [W]: 1200 W Number of heating bands: 3 Max. throughput: approx. 5 kg/h Max. processing temperature [°C]: 300

Būklė: labai geros būklės (naudotas), Gamybos metai: 2004, Engel Victory 80/45 Tech Clamping force: 45 tons, tie-barless Cpodpfx Ash Rawboahsw Screw diameter: 22 mm Year of manufacture: 2004 Control unit: CC 200

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 1984, Load capacity: max. 300 kg. Reel plate diameter: 1,000 mm Maximum flange outer diameter: 900 mm Flange inner diameter: 240 - 560 mm Maximum flange width: 180 mm Cpsdpfsf S I I Hex Aahsw

Būklė: geras (naudotas), Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 191523, spaudimo jėga: 490 kN, varžto skersmuo: 30 mm, -KOM 3086- Offered here is a used injection moulding machine. Cpsdsv Tb U Depfx Aahow Technical specifications: Manufacturer: Engel Model: Victory 50 Designation: VC 200/50 Tech Clamping force: 50 t Year of manufacture: 2013 Machine No.: 191523 Screw diameter: 30 mm Tie bar spacing: Tie-barless Location ring diameter: 125 mm

Gamybos metai: 1993, būklė: paruoštas naudoti (naudotas), A total of six used injection moulding machines with various accessories from Arburg and Engel are available. 1) Engel ES80/35, year of manufacture: 1992, clamping force: 350 kN, injection pressure: 1,500 bar, shot weight: 35 g/PS, screw diameter: 22 mm, centring bore: 110 mm, mould opening stroke: 330 mm, control unit: defective. 2) Arburg 305 ECO 700-230, year of manufacture: 1989, clamping force: 700 kN, screw diameter: 40 mm, centring bore: 125 mm, min./max. mould height: 190 mm/420 mm, tie bar distance X/Y: 305 mm/135 mm, mould opening stroke: 250 mm, control unit: defective. 3) Arburg 305-210-700, year of manufacture: 1982, clamping force: 700 kN, injection pressure: 1,500 bar, shot weight: 117 g/PS, screw diameter: 35 mm, centring bore: 125 mm, min./max. mould height: 200 mm/400 mm, tie bar distance: 305 mm. 4) Arburg 221-75-350, year of manufacture: 1992, clamping force: 350 kN, injection pressure: 1,500 bar, screw diameter: 22 mm, centring bore: 110 mm, min./max. mould height: 150 mm/300 mm, tie bar distance: 221 mm. Cedpfxsvb Hbfs Aahopw 5) Arburg 221-55-250, year of manufacture: 1991, clamping force: 250 kN, shot weight: 32 g/PS, screw diameter: 20 mm, min./max. mould height: 150 mm/300 mm, tie bar distance: 320 mm. 6) 2K injection moulding machine Arburg 221-75-350, year of manufacture: 1993, clamping force: 350 kN, injection pressure: 1,500 bar, shot weight: 38 g/PS, screw diameter: 22 mm, min./max. mould height: 150 mm/300 mm, tie bar distance: 221 mm. Includes 7-8 Arburg dryers, various injection units, AirComp compressor, fluid silicone mixing unit with Arburg control and Scheugenpflug. Documentation available. On-site inspection possible.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1998, Engel ES 330/80 HLS Clamping force: 80 tons Year of manufacture: 1998 Screw diameter: 35 mm Cjdpfx Aaopdr Aijhepw Shot volume: 154 cm³ Enlarged platen: 660 x 560 mm Minimum mold installation height: 200 mm