Karšto preso modelis SIMI 4LP

SIMI 4 LP

Sąlyga: naudotas, Working width: 1350 mm Number of sanding units: 2 pcs. Max. workpiece thickness: 160 mm Abrasive belt dimensions: 1370 x 2150 mm Feed motor: 0.75 HP Unitek Excel LC 1370 2N RKRT MODEL: Excel 2NRKRT 2-BELT MACHINE 1st BELT: ROLLER 2nd BELT: COMBINATION UNIT ROLLER/PAD FOR SOLID WOOD, VENEER, AND INTERMEDIATE LACQUER SANDING - Usable WORKING WIDTH mm: 1350 - SANDING BELT LENGTH mm: 1370 x 2150 - MAX. WORKPIECE THICKNESS mm: 160 - STEEL CALIBRATION ROLLER mm: 180 - Rubber-coated SANDING ROLLER mm: 180 - SANDING PAD WIDTH mm: 50 - BELT MOTOR POWER kW: 14.7 - BELT SPEED m/s: 18/16 - FEED MOTOR POWER HP: 0.75 - Variable speed drive for feed carpet, continuously adjustable SPEED m/min: 4/20 - HEIGHT ADJUSTMENT MOTOR HP: 0.33 - Mechanical BELT OSCILLATION “ECO GEAR PATENT SYSTEM” - 1 pc. DRUM BRAKE for belt braking - Pivoting ROLLER for belt tensioning - 3 pcs. PRESSURE ROLLERS; rubber-coated - EMERGENCY STOP STRIP at infeed - ELECTRONIC DISPLAY of workpiece thickness - 2 pcs. ROLLER TABLES with 2 rollers each at infeed and outfeed - AUTOMATIC CENTERING OF FEED CARPET - 1 EXTRACTION PORT with 160 mm diameter - AUTOMATIC TABLE POSITIONING PLEASE NOTE: New patented belt oscillation system: 1. Without valves 2. Without photoelectric barrier 3. Not sensitive to dust 4. Energy-saving, environmentally friendly system Since 2008, the machine model with this system operates continuously without lateral belt run-off! - Unitek steel calibration roller (same for all models) - Unitek flexible pressure pad before and after the roller (same for all machines with 1 roller) - Unitek grit compensation with mechanical grid-set with 6 positions (per piece – same for all models) - Unitek electronically segmented sanding pad with 24 segments (sanding width 1350) - Unitek belt motor power up to 18.4 kW instead of 14.7 kW (per motor) - Unitek surcharge for 2nd motor 14.7 kW (only for Excel 2-belt) - Unitek automatic table lowering in emergency stop (same for all models) - Unitek surcharge for frequency-controlled feed speed - Unitek surcharge for infeed/outfeed roller table with 4 rollers (same for all models) Codpormucxefx Af Tepu - Price per roller table - Unitek electronic control of machine functions with 12" touchscreen (same for all models) Automatic workpiece scanning with feed control --- Machine price in above configuration upon request! --- Options at additional cost: Surcharge for 3-belt machine Roller-Roller-Pad (Mod. 049): €8,390.00 Freight costs: €1,300.00 Assembly and instruction: €1,300.00 --- All prices stated are net prices plus statutory VAT (19%) --- (Technical data as per manufacturer – subject to change and errors excluded!)

Gamybos metai: 2021, Sąlyga: paruoštas naudoti (naudotas), Ši Felder FORMAT 4 KAPPA 550 plokščių pjovimo staklės pagamintos 2021 m. Jos turi slankųjį stalą, pjūklo disko skersmuo – 250–550 mm, pjovimo aukštis – 202 mm prie 90° ir 140 mm prie 45°. Yra trys sukimosi greičiai: 3000, 4000 ir 5000 aps./min., pjovimo plotis – 1250 mm, ilgis – 2800 mm. Įrengta e-motion valdymo sistema ir teleskopinis atraminis taškas skersiniams pjūviams iki 3200 mm. Daugiau informacijos suteiksime susisiekus su mumis. Cpjdpfjx D Exqjx Af Tou Pritaikymo sritys Pjovimas (mediena)

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, Pilnai veikiantis UniControl 12, 2006 metų modelis iš Norvegijos. - Norėdami pamatyti tikslias technines specifikacijas, atidarykite toliau prisegtą PDF dokumentą. UniTec 12 skerspjūvis: - pjovimo mazgas - apačioje esantis briaunų apvalinimo freza - Pakėlimo velenas Nr. 1 - Pakėlimo velenas Nr. 2 - Pakėlimo velenas Nr. 3 Ilgas, profilio modulis UniVar 12: - Profilio freza - Profilio freza - Profilio freza horizontali - Profilio freza - Profilio freza Cpsdpfjmgc I Njx Af Tsu - Profilio freza Bendra elektros galia 114 kW, 400 V AC Siurbimo poreikis – 270 m³/min Suspausto oro poreikis – 1000 l/min Staklės buvo naudojamos iki 2023-08-15. Apmokėjimas: prieš pakraunant Pristatymas: iš gamyklos Rendalen, Norvegija Staklės yra Norvegijoje (netoli Trondheimo) Šiuo metu atjungtos, laikomos sausame ir šiltame sandėlyje, paruoštos išsiuntimui. Rekman Maskin & Service – medienos apdirbimo staklių servisas nuo 1986 m.

Sąlyga: naujas, Gamybos metai: 2025, Concept Easy yra ideali montavimo pagalbinė priemonė kai montuojamos kaištinės jungtys korpuso presavimo metu bei gaminant stalčius. Trumpas pristatymas: • Nedidelis užimamasis plotas, mažiau nei 1,8 m² • Potenciometras beslenkiam spaudimo jėgos reguliavimui • Minimali spaudimo jėga: 300 daN (kg) • Maksimali spaudimo jėga: 2200 daN (kg) • 3 presavimo ir reguliavimo greičiai: 5 / 10 / 25 mm/s (su tikslia pozicionavimu / lėtu režimu) • Laisvai nustatomas presavimo laikas su automatinio atidarymo funkcija Cedpfx Asdx Daaof Tjpu

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2012, mašinos/transporto priemonės numeris: 778 F 319, Lazerinio pjovimo įrenginys Gamintojas: Prima Power Cpodpfxsmx Rrls Af Teu Modelis: Palatino 1530 Pagaminimo metai: 2012 Komplektacijoje: Oro filtravimo sistema su aukšto efektyvumo nanoplaušelių filtrais, ilgaamžiai ir vandens aušinimo sistema (KLIMA)

Sąlyga: naudotas, Gamybos metai: 1986, Sheet thickness: 6.0 mm Pressure: 18 t Shearing angle – upper blade: 90° Blade length: 225 x 225 mm Operating voltage: 380 V Cpjdpfsg Ip Efex Af Teu Total power requirement: 5.5 kW Machine weight: approx. 650 kg Space requirement: approx. 1.10 x 0.80 x 1.05 m - Adjustable angle stops

Sąlyga: naudotas, Combined Section Steel Shear and Punch GEKA Type HYD 80 / Hydracrop 80/A Machine No. 9566 Year of manufacture approx. 2000 Punching force: 80 tons Throat depth: 300 mm Punching up to Ø 40 mm in 14 mm sheet Flat bar shear: 450 x 15 mm Angle steel shear: 130 x 130 x 13 mm Square bar shear: 45 x 45 mm Round bar shear: Ø 45 mm Rectangular notcher: up to 12 mm Motor power: 5.5 kW Csdpfx Aorz Tutof Tjpu Power supply: 400 Volt, 50 Hz - Stop with electric stroke release, 500 mm - Worktable with stop at punching station: 550 x 380 mm - Working height at punching station: 1100 mm - Worktable with stop at rectangular notcher: 550 x 400 mm - Working height at rectangular notcher: 930 mm - Approx. 21 assorted punching tools - Operating manual - Original paint, not repainted Space requirements (L x W x H): 1800 x 1150 x 1950 mm Weight: 1.7 tons Very good condition

Sąlyga: labai geros būklės (naudotas), Line for door frames (casings), for cutting, milling of strike plates, and inserting hinges (ANUBA) comprising: X10030A) Discharge conveyor X10030B) Transfer unit X10030C) Double cutting and drilling machine "AMS" - 45° left-side cut – Drilling - 90° cut - 45° right-side cut – Drilling Cpjdpsqwyclsfx Af Teu X10030D) Angle conveyor (90°) X10030E) Anuba hinge insertion machine "MASTERWOOD" model MULTITEC X10030F) Strike plate milling machine "MASTERWOOD" model Teknomat 3000

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, Condition of the machine is very good, it has performed only 123,000 operations. CNC-controlled automatic machine, designed for processing welded frames. Independent drive and control system. Multiple use of the same processing time Operates in a welding and cleaning line Does not require additional floor space in the hall Cpedpfx Afsm Ak R Uj Tju Can be adapted to work in a sash production line All operations are performed during the cooling phase: drainage vent grooves vent holes in colored profiles drilling of frame for mullion connector drilling of holes in the frame for hinges (x6) The center has its own frame transportation system from welder to cleaner SPS, NC control User-friendly visualization

Sąlyga: naujas, Technical data: Working width: 1100 mm Sanding belt dimensions: 1120x2150 mm Maximum working height: 160 mm Calibrating steel roller diameter: 150 mm Rubber roller diameter: 150 mm Sanding pad width: 50 mm Total motor power for both sanding units: 11 kW Sanding belt speed: 16/18 m/s Feed motor power: 0.55 kW Cpedpsgtm U Ajfx Af Teu Variable feed belt speed: 4-20 m/min Work table motor power: 0.25 kW Pneumatic shoe, lift/lower function: YES