Suvirinimo pasukamas stalas, rezervuaro pasukimo įtaisas

Protec RB 6000

Būklė: naujas, Gamybos metai: 2024, keliamoji galia: 6 000 kg, Įranga: kojinis nuotolinio valdymo pultas, Welding positioner, vessel rotator with 6000 kg load capacity with manual and foot remote control Diameter range: 160 mm to 4000 mm Hjdpfx Aajgfql Aj Dor Drive roller diameter: 300 mm Dimensions: Length 1900 mm x Width 470 mm x Height 390 mm Infinitely variable speed: 50 - 2000 mm/min Motor: AC 380 V

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2022, 600 kg load capacity welding positioner, height-adjustable with through-hole 100 - 200 mm Table diameter: 700 mm Horizontal height min. 0.65 m, max. 1.25 m Tilted height min. 0.45 m, max. 0.95 m Rotation speed: 0.01 - 1.1 rpm Hjdjd Anz Ropfx Aa Dor Tilting angle up to 135° Hand and foot remote control with speed display Very robust construction

Būklė: geras (naudotas), various counter bearings (support brackets), rollers 5-way adjustable for transverse and longitudinal rotation to relieve, for example, welding positioners or for transporting pipes different models available height adjustment either in steps or stepless various heights available the supports themselves have a load capacity of up to 8 tonnes Hedpfel Dwnlex Aa Dor Prices from €480 to €850

Būklė: labai geros būklės (naudotas), Motorized 3x3 welding column with movement control via pendant station. Hedpju Afttjfx Aa Dor Usable capacity: 3x3 m Wire spool dispenser Lincoln Idealarc DC-1000 submerged arc welding unit with torch, flux hopper, and Lincoln NA-3N amperage and voltage control panel. Submerged arc duty cycle: 1000 Amps at 100%. Idealarc® DC-1000 Submerged Arc Welder Input voltage: 230/460 V Input current: 193/96.5 A Input frequency: 60 Hz Input phase: 3 Input power: 230/460/3/60 Mode icon: CC/CV Output range: 150–1300A DC, 16–46V Polarity: DC Rated output: 1000A / 44V / 100%

Būklė: naujas, Gamybos metai: 2024, keliamoji galia vienai konsolės svirčiai: 500 kg, lentynos aukštis: 3 200 mm, bendras ilgis: 2 100 mm, bendras aukštis: 3 200 mm, ašių atstumas: 1 000 mm, apkrova vienai atramai: 2 500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack uprights, height 3.2 m, with foot section, 1.8 m usable depth (2 m total depth) 12 cantilever arms with 1.8 m usable depth (for chipboard sheets approx. 2.1 m deep) Hsdpsqt Dmyefx Aa Dor Longitudinal and diagonal braces for 4 m rack length (1.3 m spacing) Mounting hardware (bolts, nuts, and washers) Net price: €2,490.00 plus VAT. Detailed description: - Robust steel construction made of IPE sections (bolted system) - Rack height 3,200 mm - Load capacity per upright: 2,500 kg - Foot section and cantilever arms: 1,800 mm usable depth (for 2,100 mm chipboard depth) - Cantilever arms height-adjustable in 100 mm increments - 4 bolted cantilever arms per upright, standard (= 5 storage levels) - Load capacity per cantilever arm: 500 kg - Includes longitudinal and diagonal bracing for 1,000 mm spacing - Rack length = 2,100 mm - Includes mounting material (excluding floor anchors) - With assembly instructions and C4 load signs according to DIN standard - Made in Germany - Short delivery times Our cantilever racks are produced exclusively in Germany. We offer reliable shipping with advance notification prior to delivery. Materials are sensibly packed to enable easy unloading. Delivery for items in stock can be made approx. 1 week after receipt of order. When installed outdoors, load capacities are reduced due to wind and snow loads. The surface must be concrete, level, capable of accepting anchor bolts, and able to absorb the acting loads. Floor condition and load bearing capacity as well as any permits required by authorities must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site. Anchoring to a wall is neither necessary nor recommended. According to trade association guidelines, it is recommended that rack uprights have at least 500 mm clearance above the top storage level relative to the top of the upright.

Būklė: naujas, Gamybos metai: 2026, 2-roll driven profile roller Hydraulically adjustable upper roller Shaft diameter: 40 mm Roller diameter: 152–162 mm Rotational speed: 8.5 rpm Hodpfx Ashgiuhea Dor Upper roller adjustment: 120 mm Capacity chart: see attachment Machine available in various configurations: Manual adjustment, 3-roll drive, etc.

Būklė: naudotas, (14) Nenaudotos MAN UPB 12-L-W-E3262E302 kogeneracinės (CHP) jėgainės, kurių galia 130 kWel ir 226 kWTh, pagamintos 2022 m. ir skirtos naudoti su medienos dujomis. Projektas buvo sustabdytas, todėl įranga niekada nebuvo sumontuota ar paleista. Komplektą sudaro ši pagrindinė įranga: - MAN 12 cilindrų variklis, vardinė galia 273 kW, 50 Hz, 1500 aps./min - Marelli MBX-E 250 MA4 generatorius, vardinė galia 169 kVA, 400 V, 50 Hz, 1500 aps./min - Motortech oro-kuro santykio (AFR) valdymo sistema - ComAp generatoriaus valdymo sistema Hjdpfxsyhc T Ij Aa Dsr Prieinama 14 vienetų.

Gamybos metai: 2004, būklė: labai geros būklės (naudotas), Four-side planer Hedpfx Aaohlp D No Djr - Maximum planing width: 23 cm - Maximum planing height: 16 cm - 2 feed rollers in the table - Chrome-plated table - Infinitely variable feed speed adjustment - 2 overhead transfer rollers in front of the bottom head, plus a roller device for short elements - 4 spindles: bottom 5.5 kW, right 5.5 kW, left 5.5 kW, top 7.5 kW The machine is in very good condition, lightly used, equipped with spiral cutterheads on the bottom, right, and left spindles, and a Tersa knife head on the top spindle.

Gamybos metai: 2009, būklė: geras (naudotas), mašinos/transporto priemonės numeris: 120P1109, OFFER 21407 Motorized tank rotating device with rail-mounted undercarriage Technical data: - Total load capacity (powered + idler unit): 40,000 kg - Load capacity per tank turning unit: 20,000 kg - Workpiece diameter approx.: 500 - 3,500 mm - Center distance of support rollers adjustable via trapezoidal spindle Hedpfxjhcnhmj Aa Dor - Roller diameter: 500 mm - Roller width: 150 mm - Powered unit with dual-sided drive - Infinitely variable rotation speed control - Handheld remote control for forward and reverse - Drive: 400 V - Both units are mounted on rail undercarriages - Space requirement powered unit approx.: W 3,800 x H 1,150 x D 1,350 mm - Space requirement idler unit approx.: W 3,600 x H 1,150 x D 1,350 mm - Weight powered unit approx.: 2,500 kg - Weight idler unit approx.: 1,800 kg

Būklė: geras (naudotas), X ašies eiga: 745 mm, Y ašies eiga: 370 mm, Z ašies eigos atstumas: 300 mm, Bridgeport milling machine Model: Interact 4 Control: Heidenhain TNC 155 X-travel: 745 mm Y-travel: 370 mm Z-travel: 300 mm Hjdpfx Aaoqgcdts Dsr Table size: 960 x 380 mm Spindle: ISO 40 Dimensions: 185 x 180 x 235 cm (LxWxH)