Blowing Machine SIDEL

Sidel SBO 6

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: SBO 6/10, Sidel Stretch Blow Moulding Machine Max. output: 6,000 bottles/hour Max. bottle size: 3,000 cc Blow stations: 6 The machine is in very good, well-maintained condition. GENERAL INFORMATION The SBO 6/10 features 6 moulds and 10 heating modules. Suitable for a wide range of bottle sizes and styles from 0.25 to 3 liters. Sidel’s two-stage PET stretch blow moulding machines require pre-manufactured preforms to be fed into the machine. Separating bottle production from preform manufacturing enables production optimization, greater operational flexibility, and higher productivity and yield. MAXIMUM PREFORM DIMENSIONS Neck height: 9 – 41 mm (measured from bottom edge of support ring) Minimum neck internal diameter: 19 mm Maximum neck external diameter: 34 mm Preform support ring diameter: 29 – 51 mm Maximum preform length: 210 mm MAXIMUM BOTTLE DIMENSIONS Maximum bottle diameter: 130 mm Maximum bottle height: 380 mm Bottle volume: 0.25 – 3 liters AVERAGE PREFORM WEIGHTS (for still and carbonated liquids) 0.25-liter bottle: 14-20 grams 0.50-liter bottle: 20-33 grams 1.00-liter bottle: 26-40 grams 1.50-liter bottle: 35-51 grams 2.00-liter bottle: 44-58 grams 3.00-liter bottle: 68-84 grams BLOW MOULDING WHEEL Height: 3.5 meters Number of moulds: 6 Clamping force: 10 tonnes Discharge height (under neck): approx. 1.4 meters Machine DC drive motor output: 4 kW HEATING SECTION Height: 2 meters Number of oven heaters: 10 Heating zones per unit: 8 Max. output: 170 kW ELECTRICITY CONSUMPTION Max. connected load: 200 kW Average consumption: 100-150 kWh (varies by bottle produced) COMPRESSED AIR Available pressure: 7-35 bar Pressure: 7 bar Flow rate: 50–100 Nm³/h (varies by bottle produced) Blow pressure – champagne base: up to 25 bar Blow air flow – champagne base: 110–550 Nm³/h Blow pressure – petaloid base: up to 35 bar Blow air flow – petaloid base: 155–770 Nm³/h Bodpfxjg Ailco Ai Eslp COOLING WATER Temperature: 10-12°C Pressure: 5-6 bar Flow rate: up to 6 m³/h Cooling requirement: up to 16,000 Kcal/h WEIGHT Blow moulding wheel with moulds: 8 tonnes Heating section: 2.2 tonnes Preform feeder: 0.65 tonnes Control cabinet: 0.85 tonnes PREFORM HEATING SECTION The preforms are transported neck upwards to the heating unit. This unit continuously ensures that preforms are inverted before passing (neck down) in front of the heating modules, and then turned again. During the heating phase, preforms are rotated and their necks are shielded from heat to optimize temperature distribution without deforming the neck. Heating is provided by 10 heating modules. Each unit can be fitted with up to 8 horizontally stacked, air-cooled infrared lamps. The heating power of each of the 8 lamp zones is adjustable to optimize the thermal profile. These zones are regulated on all SBO models. After heating, infrared temperature measurement of the preform allows further regulation of controlled zones, ensuring uniform preform temperature is maintained.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1993, Funkcionalumas: visiškai funkcionalus, produkto aukštis (maks.): 380 mm, ruošinio skersmuo (maks.): 130 mm, gamybos pajėgumas: 7 200 vienetas/val, TECHNICAL DETAILS Number of molds: 6 Capacity with standard bottles: up to 7,200 bph Product formats Bottle volume: 0.25 – 3.0 L Max. bottle height: 380 mm Max. bottle diameter: 130 mm Preform dimensions Max. preform length: 210 mm Internal neck diameter: 34 mm MACHINE DETAILS Dimensions & weight Blow module dimensions: 2,000 x 2,200 x 2,200 mm Blow module weight: 8,000 kg Oven dimensions: 3,000 x 1,100 x 2,100 mm Oven weight: 2,000 kg Control cabinet dimensions: 1,500 x 1,000 x 2,100 mm Control cabinet weight: 1,000 kg Transformer 415V / 380V dimensions: 1,000 x 500 x 2,000 mm Transformer weight: 500 kg Preform hopper and conveyor dimensions: 3,000 x 1,500 x 3,500 mm Preform hopper and conveyor weight: 600 kg Preform loader dimensions: 2,000 x 2,500 mm Preform loader weight: 250 kg Feeding rails length: 2,000 mm Power supply Total power: 142 kW Bedpfx Aex A Uu Eei Eelp Mains connection: 380/420 V +/- 10%, 50 Hz +/- 1% Cooling water Cooling capacity: 16,000 kcal/h Water temperature: 10 - 12 °C Flow rate: up to 6.0 m³/h Water pressure: 5 - 6 bar Compressed air Service air pressure: 7 bar Service air flow rate: 50 - 100 Nm³/h Blow air pressure: up to 35 bar Blow air flow rate for 0.25 – 3.0 L: 155 – 770 Nm³/h EQUIPMENT Transformer 415V / 380V Preform hopper and conveyor Preform loader Feeding rails Adaptation to other voltages possible