Gręžimo staklės

SHW UF 31 UF 41

Būklė: geras (naudotas), Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 860 mm, Y ašies eiga: 560 mm, Z ašies eigos atstumas: 600 mm, CNC valdymas Heidenhain iTNC530 24 vietų įrankių keitiklis Elektroninis rankenėlė (el. rankinis valdiklis) Drožlių transporteris IKZ (vidinis aušinimas) Ištraukimo sistema Dwedpfxey Hqmhj Aaija Techniniai duomenys: X eiga: 860 mm Y eiga: 560 mm Z eiga: 600 mm Verpstės tvirtinimas: SK 40 Verpstės apsukų diapazonas: 0–10000 aps./min Greitasis eiga (X,Y,Z): 24, 24, 20 m/min Stalo tvirtinimo plotas: 1000x560 mm Įrankių keitiklio vietų skaičius: 24 Verpstės variklio galia 40%ED: 18,5 kW Svoris apytiksliai: 6.500 kg Techniniai duomenys, priedai ir mašinos aprašymas nėra įpareigojantys.

Būklė: naudotas, Gamybos metai: 2011, Technical Details: Turning length: 310 mm Swing diameter over bed: 500 mm Swing diameter over cross slide: 290 mm Centre distance: 500 mm X-axis travel: 190 mm Z-axis travel: Z1: 335 / Z3: 370 mm Y-axis travel: 80 mm Spindle speed: 6,000 rpm Control: Heidenhain CNC Pilot 4290 Spindle bore: 73 mm Bar capacity: 50 mm Tool turret – Number of stations: 12 Tool holder: VDI 30 mm Rapid traverse X + Z axes: 30 m/min Machine on-time hours: 36,443 h Spindle hours: 8,545 h Interface: yes Total power requirement: 20 kVA kW Chip conveyor dimensions LxWxH: 3.2 x 0.45 x 1.5 m CNC slant-bed lathe Dwsdpfx Aew S Efzsaija Equipped with a 3-jaw chuck Ø 160 mm with matching flange (max. speed 4,500 rpm) and two additional sets of replacement jaws. Turret for 12 tools, all driven; Sauter disc turret (C-axis = 300 rpm). Main spindle torque: 95 Nm at 100% and 127 Nm at 40%. Chip conveyor 450 K-1/250; year of manufacture: 2000. Electrical cabinet with Rittal cooling. The machine is not equipped with a hydraulic chuck. A manual chuck has been fitted by the previous owner. The machine is offered for sale in non-functional condition. It has an unknown turret fault, therefore reference runs and axis movements are not possible. Machining functionality is currently not possible. The machine is being sold as defective / in need of repair! i.D.

Būklė: naudotas, Gamybos metai: 1980, Grinding length: 500 mm Grinding width: 200 mm Workpiece height: 290 mm Machine from the Physikalisch-Technische Bundesanstalt - Geometrically reconditioned - Electrical system checked, fully functional, relevant components replaced - All wear parts replaced - Color: light grey, paint condition good Equipment: Electromagnetic chuck 500x200 mm Dodpfjwb Hygsx Aaiewa Grinding spindle overhauled 2-axis digital readout for Y and Z axes Automatic feed for Y and Z axes Y-axis with zero shut-off Manual hand dresser Infinitely variable grinding wheel speed Constant V-belt despite wheel wear Paper band filtration system, used Max. height with 250 mm grinding wheel diameter: 290 mm Max. grinding area: 600x250 mm Max. load including magnet: 100 kg Warranty: 1 year on geometry and electronics throughout Germany Delivery: ex works Availability: immediately Payment: prior to collection Acceptance at our facility Shipping as specified by the customer

Būklė: naujas, Gamybos metai: 2024, Bending force: 320 t Year of manufacture: New (delivery time 6-8 weeks) Control: DT 15 Bending length: 3050 mm Distance between columns: 2600 mm Y rapid speed: 160 mm/s Y working speed: 10 mm/s Y return speed: 140 mm/s Motorized crowning Table length: 630 mm Table width: 154 mm Table height: 900 mm Dodpfxofifg Hs Aaiowa Stroke: 365 mm Throat depth: 410 mm 2 support arms 2 backgauge fingers X-axis travel speed: 250 mm/s R-axis working speed (max.): 140 mm/s R-axis travel path: 250 mm Standard equipment: Y1, Y2, X (3-axis) Y1, Y2, X = 650 mm (double guide, aluminum) D-BEND software for 3D bending simulation and alignment Manual crowning R-axis, manual Backgauge with motor and linear guide, ball screw Backgauge fingers with height adjustment (R-axis, manual) CE die holder system (upper dies) Front sheet support arms, sliding (with T-slot and stops) Hydraulic blocks and valves in special design, in accordance with international standards Electrical equipment according to international standards Option: CE standard with manual Fiessler AKAS II M -FPSC-B-C (SAFETY PLC) CNC motorized crowning Y1, Y2, X, R (4-axes) CNC motorized crowning Motor power: 37 kW Oil tank capacity: 250 liters Length: 4300 mm Width: 1820 mm Height: 3230 mm Weight approx. 17,250 kg

Būklė: naudotas, System: Used piston diaphragm high-pressure pump / feed pump Type: HMD-G-50-500 Flow rate: 40.0 m³/h Pressure: 1.6 MPa Dsdpfedkdi Tsx Aaiewa

Būklė: naudotas, Gamybos metai: 1992, Šlifavimo ilgis 0800 mm Šlifavimo plotis 500 mm Dedpswgnz Ajfx Aaiowa Ruoinio aukštis 400 mm Stalo dydis 800 x 400 mm Stalo greitis 1–25 m/min Automatinis skersinis padavimas 0–60 mm/taktas Šlifavimo disko matmenys 400 x 100 x 127 mm Šlifavimo veleno apsukos 1400/2800 aps./min Bendras galios poreikis 10 kW Įtampa 380 V Staklių svoris apie 6 t Staklės su aušinimo sistema, automatiniu vertikaliu padavimu, paruošimo įrenginiu ir disko laikikliais. Valdymo sistema dėl amžiaus yra nepatikima!

Būklė: naudotas, Grinding length 1000 mm Grinding width 300 mm Workpiece height 230 mm Clamping table area 1000 x 240 mm X-axis travel 1000 mm Y-axis travel 270 mm Dsdpfx Aju Dn Txeaijwa Z-axis travel 350 mm Grinding wheel diameter 240 mm Grinding spindle speed 2180 rpm Table speed - stepless - 3 - 30 m/min Total connected load 4.5 kW Machine weight approx. 2.8 t Machine dimensions (L x W x H) 2.36 x 1.37 x 2.0 m Accessories: Magnetic chuck 680 x 200 mm, grinding wheel with flange (ø 240 x 25 mm), Coolant system

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2006, X ašies eiga: 5 500 mm, Y ašies eiga: 1 400 mm, Z ašies eigos atstumas: 1 000 mm, veleno greitis (maks.): 5 000 aps./min, veleno greitis (min.): 15 aps./min, stalo plotis: 1 200 mm, stalo ilgis: 6 000 mm, RepairFIT by Dornhöfer The Difference. Including installation & commissioning! Machine year of manufacture: 2006 Capacities / Travel distances: Longitudinal (X): mm 5,500 Vertical (Y): mm 1,400 Transverse (Z): mm 1,000 Clamping table: Length: mm 6,000 Width: mm 1,200 Number of T-slots on table surface: qty 12 T-slot width: mm 22 Distance between slots: mm 100 Dwsdpfxey Tkgbj Aaisa Maximum workpiece weight: kg 13,500 NC Rotary Table: Position: right, flush-integrated in table surface Clamping surface: Ø mm 1,000 Positioning accuracy: ° 360x0.001 Maximum workpiece weight: kg 3,500 Number of T-slots: qty 9 T-slot size: mm 22 T-slot spacing: mm 100 Paintwork: RAL 7035 light grey / RAL 5011 steel blue Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Main drive: Drive power: 100% duty cycle kW 28 Spindle speed range: Spindle speed: min⁻¹ 15 – 5,000 Torque: Nm 815 Feeds: X, Y and Z-axis mm/min 2 – 10,000 Max. rapid traverse speed: X, Y and Z-axis mm/min 25,000 Max. feed force: N 10,000 Footprint FLC6000: m (approx.) 11.0 x 5.6 Total height: m (approx.) 3.5 Weight: kg approx. 35,000 HEIDENHAIN iTNC 530 HSCI Automatic MTE diagonal milling head Automatic tool changer Chip conveyor Coolant system with 70 bar & (internal coolant supply) RepairFIT is our proven solution for a profitable entry into our product lines. Machines available in this series are procured by us via a strict selection process and subjected to a comprehensive inspection (deep-dive check). Following intensive cleaning, all detected, apparent faults and defects are professionally repaired by our experienced service team.

Būklė: naudotas, Gamybos metai: 2002, Apžvalga Ši pilna PET išpilstymo linija buvo pagaminta laikotarpiu nuo 1999 iki 2007 metų Krones (Vokietija) ir kitų Europos tiekėjų. Šiuo metu ji vis dar eksploatuojama ir naudojama gazuoto vandens bei limonadų išpilstymui į 1,5 litro PET butelius. Linijos našumas siekia iki 16 000 butelių per valandą. Įranga buvo reguliariai prižiūrima ir yra geros techninės būklės. Prieinamumas: nuo 2025 m. rugpjūčio pabaigos. Techniniai duomenys - Našumas: iki 16 000 butelių per valandą (pagal 1,5 l PET butelius) - Formatai: 1,5 l PET buteliai (trumpa kakleliu ir dangteliu) - Butelių medžiaga: PET - Pilstytuvas: izobarinis pilstymo įrenginys Djdpfxewzvl Se Aaiowa - Gamybos metai: nuo 1999 iki 2007 (skirtingos mašinos) - Užsukamo dangtelio tipas: trumpas kaklelis - Etiketės tipas: OPP (Contiroll) Komplektacija - 1 x pūtimo mašina CONTIFORM S16 | Krones | 2002 | įskaitant preformų bunkerį ir aušintuvą - Oro transporteriai nuo pūtimo mašinos iki etiketavimo ir pilstytuvo - 1 x etiketavimo mašina CONTIROLL | Krones | 2000 - 1 x Triblokas 77/88/11 MECAFILL izobarinis pilstytuvas | Krones | 2002 | su metalo detektoriumi - 1 x maišytuvas gazuotam vandeniui ir gėrimams | apie 2000 - 1 x rašalinis spausdintuvas HITACHI RXS - Transporteriai tarp pilstytuvo ir tunelio - 1 x susitraukimo tunelis VARIOPAC | Krones | 2007 | 45 pak./min. - 1 x pakuočių rankenų aplikatorius TWIN PACK MDE INOX | 2003 | viena eilė, 45 pak./min. - Pakuočių transportavimas iki palečių kroviklio - 1 x palečių kroviklis KETTNER KR51112 Pressant Universal | 1999 - Palečių padavėjas su liftu ir transportavimo sistema - 1 x palečių apvyniojimo įrenginys ROBOPAC GENESIS | 2002

Būklė: naudotas, x-axis travel 500 mm y-axis travel 400 mm z-axis travel 400 mm O F F E R We can offer you from stock, subject to prior sale and errors, without obligation: DECKEL MAHO CNC Universal Milling Machine Model DMU 50 M Year of manufacture 1998 _____ Working area: Longitudinal travel X-axis 500 mm Vertical travel Z-axis 400 mm Cross travel Y-axis 400 mm C-axis – table rotation, manual 360° B-axis – table tilting, manual ° Table surface Ø 700 x 500 mm Table tilting range ° Table rotation 360° Max. workpiece weight 200 kg Distance between table and spindle approx. 550 mm Overhang between machine and spindle min./max. 2 – 6 mm Tool holder SK 40 Spindle speed infinitely programmable 20 – 4,500 rpm Feed rates / rapid traverse max. 5,000 mm/min AC main drive 0%/40% DC approx. 9 / 13 kW Total connected load approx. 15 kW - 400 V - 50 Hz Weight approx. 3,000 kg Equipment / Special features Dwedpfx Aov Td Eleaiea • 3-axis path control HEIDENHAIN TNC 124 with monitor and direct data input, with electronic handwheels for all 3 axes. • All 3 axes in the milling head so that even "irregular-shaped" workpieces can be machined on the stationary table. • Rotary table, manually rotatable 360°, manually tiltable +/-°, both with locking. Digital display of tilt angles integrated into the control. • Simple coolant unit, attached control cabinet (SIEMENS equipment). • Pneumatic tool clamping, various tool holders, operating manuals, CE certificate, etc. Condition: Good to very good! Ideal for training or single-part production! Please click here for a video of the machine: Delivery: ex stock, immediately available, FCA Metzingen Payment: strictly net – upon receipt of invoice Always a wide selection of milling machines in stock – please inquire about your requirements!