Pjovimo pjūklas

Serra Duett

Būklė: naujas, Gamybos metai: 2026, ♻ Universalus taikymas (mediena, padėklai su vinimis ir segtukais, medienos plaušų plokštės bei likučiai, fanera, MDF plokštės, plastikas ir kt.) ✔ Variklio galia: 30 kW ✔ Rotoriaus ilgis: 870 mm ✔ Rotoriaus skersmuo: 270 mm ✔ Rotoriaus apsukos: 80-120 aps./min. ✔ Pjaustymo peilių skaičius: 38 ✔ Granuliacijos dydis: 10-50 mm ✔ Našumas: iki 8 m3/val.* Dodpeiq U Aysfx Aahecd ✔ Užpildymo anga: 2031 x 1565 mm ✔ Matmenys (I/P/A): 3,21/1,97/2,04 m ✔ Svoris: 2450 kg 2 metų garantija arba 2000 darbo valandų

Būklė: naujas, Gamybos metai: 2026, CORMAK HBS260 band saw for cutting pipes, profiles, and bars is widely used in all metalworking shops where precision, quality, and cutting speed are essential. The model features a swiveling arm adjustable from 0-60°. The design of the saw bow ensures accurate and quiet operation. It comes with a removable chip tray for easy cleaning! Dcedpoudi Uzjfx Aahsd Machine Features This horizontal metal band saw with a swiveling arm allows for cutting perpendicular or at any angle between 0 and 60° to the material axis. The workpiece can be fed manually or with any mechanical device, while the saw blade feed operates automatically. The blade guides are fitted with special carbide inserts and bearings, which greatly improve blade tracking, longevity, straightness, and the quality of the cut. Carbide blade guides significantly reduce wear on both the machine and the blade. The machine is equipped with a high-performance coolant pump with a closed-cycle cooling system. The saw’s arm is cast from a single piece of cast iron, and, combined with a 27 mm wide band saw blade, it is fully suitable for serial cutting of both profiles and solid materials. The vice is mounted on an adjustable bed with a quick-release clamp. Blade guides are equipped with carbide inserts and rolling bearing systems. It is the CARBIDE BLADE GUIDES that ensure cutting precision and straightness. The upper part of the base is shaped to form a tray for collecting coolant and chips generated during the cutting process. To the base, a sturdy cast iron work table with a swiveling arm is mounted, along with a control panel on a separate arm. During cutting, the main cutting motion is performed by the moving saw blade, while arm feed is via gravity. The speed of arm descent (cutting speed) is adjusted using a hydraulic cylinder. Feed rate is controlled from the saw’s control panel. There are two blade speeds to choose from: 35 and 70 m/min. In the lower end position of the arm (after cutting the material), the drive to the blade is automatically switched off. Safety is ensured by saw blade guards and microswitches that stop the motor after the cutting cycle or when any guard is opened. Additional protection consists of the automatic saw shut-off in the event of blade breakage. Band saw blade size [mm]: 2520 x 27 x 0.9 Blade tension: mechanical (manual) Blade speeds [m/min]: 35, 70 Arm descent adjustment: stepless – hydraulic cylinder Vice base height [mm]: 860 Saw wheel diameter [mm]: 300 Saw frame swivel [°]: 0-60 Power supply: 3-phase 400V Main motor power [kW]: 1.1/1.5 Coolant pump motor power [kW]: 0.05 Dimensions with base [cm]: 150x80x140 Weight [kg]: gross/net - 210 / 180 kg Additionally: - 2 pcs M42 saw blades - 5L Emulgol coolant - Magnetic chip collector ZW580

Būklė: naujas, Gamybos metai: 2026, ♻ The P-Series pre-shredders are renowned for their high-quality blades and low rotational speed, ensuring low power consumption while maximizing productivity. The optimal shape and design make them ideal for shredding wooden pallets, Styrofoam, or similar materials with ample clearance. ✔ Motor power: 1 x 5.5 kW + 1 x 9.2 kW ✔ Rotor length: 1,580 mm ✔ Rotor diameter: 355 mm ✔ Rotor speed: 5.3 / 10.3 rpm ✔ Number of cutting knives: 12/12 ✔ Granulation: - ✔ Capacity: up to 60 pcs/h ✔ Extraction connection: - ✔ Suitable materials: pallets, Styrofoam, electronic waste, plastics, wood, etc. ✔ Feed opening: 1,560 x 800 mm Dcsdpfeic U Dfex Aahsd ✔ Dimensions L/W/H: 3.45 / 1.08 / 0.51 m ✔ Weight: 1,400 kg Supplied without stand and feed hopper 2-year warranty or 2,000 operating hours

Būklė: beveik kaip naujas (naudotas), - German-made - new knives and counter-knife TECHNICAL PARAMETERS: - feed opening dimensions: 520x1000 mm - motor power: 80 kW Dcsdpfxeqy Ek Ho Aahjd - four rows of knives - counter-knife - screen: 20 x 20 mm - screen dimensions: 1000 x 900 mm - rotor diameter: 600 mm - shaft speed: 830 rpm Machine dimensions: 235x170x290 cm weight ~ 4000 kg

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2019, Funkcionalumas: visiškai funkcionalus, Vartytuvas rąstams, įleidimo-išleidimo konvejeriai, rąstų padėties korekcijos hidraulinis keltuvas, sustiprintos konstrukcijos. Įranga iš 2019 metų. Dcodpfx Aou N Ac Sjahed

Būklė: naudotas, Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, used horizontal ZENZ block bandsaw type BN 110 S, stationary Year of manufacture: 2007; completely overhauled in 2022 Conveying technology year: 2022 Serial number: 141-8300 Equipment: • 22 kW drive motor • 7 m cutting length • 5 vertical supports • 2 log turners (+2 brackets) • Log lifting prep with frame • 4 level adjustment with claws (+2 brackets) • 1 log roller • 1 new debarker • PLC control including cutting program • Seat mounted on armrests • PLC left – joystick right • 1 Zenz sharpening machine type AHB (serial no.: S-1012) • 4 bandsaw blades 6000x100x1.1 stellite for softwood (prod. no.: AB 0) • 4 bandsaw blades 6000x100x1.1 stellite for hardwood (prod. no.: AB 0) • Water lubrication with 20l tank and nozzle o Mounted on blade guide • Log lifting system o With 3 log lifting arms o With 2 cylinders • Log lifting prep mounted in frame o With control unit o Bracket for pipe o Two brackets for cylinders Dedpjwlfdxsfx Aahocd • Hydraulic kicker for frame 820mm • Horizontal green laser display Mechanization consisting of: • Hydraulic folding frame for removal at the saw with electrically driven roller conveyor • Electrically driven roller conveyor with hydraulic kickers o Both roller conveyors run simultaneously • Idler roller conveyor, 4m long – slightly inclined with stop o All electrical and hydraulic components are operable from the operator station The block bandsaw, including conveying technology, is fully operational.

Būklė: geras (naudotas), keliamoji galia: 3 000 kg, Hywema 3 tonų dvigubas kolonų kėlimo-apsukimo įrenginys su 3-ąja ašimi, universali komplektacija, įskaitant 2 kryžminius sąnarius. Galimos 4 versijos: - Mono: 1 kolonėlės kėlimo-apsukimo įrenginys - Duo: 2 kolonėlių kėlimo-apsukimo įrenginys su kryžminiu sąnariu - Duo: 2 kolonėlių kėlimo-apsukimo įrenginys su maždaug 5 m ilgio prisukama skersine sija (papildomas reguliuojamas aukštis, tvirtinamas sraigtais) - Duo: 2 kolonėlių kėlimo-apsukimo įrenginys su prisukama skersine sija ir papildoma 3-iąja apsukimo ašimi, 3 tonų apkrova Judėjimo eiga min. 700 mm (+-150 mm) Dodpfx Asx Hpvzoahocd Judėjimo eiga maks. 2000 mm (+-150 mm) Bendras aukštis 2800 mm Bendras ilgis su 3-ąja ašimi 6300 mm Bendras plotis 1500 mm Maksimali apkrova 3000 kg Pageidaujant galimas kojinis jungiklis ir kabelinis nuotolinio valdymo pultas Paspauskite vaizdo įrašą Įrenginys perdažytas, techniškai tvarkingas

Būklė: naudotas, Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley Dedpfx Asb Hiyksahscd - Angle iron frame - Insert sleeves at each corner - Heavy-duty transport trolley - Load capacity: 200 kg - Quantity: 20 units available - Price: per unit - Dimensions: 715/1210/H325 mm - Weight: 34 kg/unit

Būklė: dilaminuotas dirbtuvėje (naudotas), - Paul crosscut saw 17 AP - pneumatic saw stroke - 150 mm cutting height - 400 mm max. cutting width Dsdpfxevkfuij Aahocd - 2 non-driven roller conveyors, each 2,000 mm long

Būklė: naudotas, Gamybos metai: 1954, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 541000, bendras aukštis: 1 700 mm, bendras ilgis: 1 200 mm, bendras plotis: 1 200 mm, bendras svoris: 815 kg, stalo ilgis: 700 mm, stalo plotis: 70 mm, disko skersmuo: 150 mm, - Pagaminimo metai: 1954 - Visiškai veikiantis, pajungtas prie elektros, paruoštas demonstracijai Dcodsxnimtjpfx Aahod - Šlifavimo disko skersmuo: 150 mm - Skersinis eigos ilgis: 300 mm - Išilginis eigos ilgis: 450 mm - Stalo dydis: 700 x 70 mm / pasukamas - Šlifavimo velenas pasukamas Z, X, Y kryptimis - Staklių matmenys: 1700 x 1200 x 1200 mm - Svoris: 815 kg - Gamyklinis nr.: 541000 Priedai: - Pasukama dalijimo galvutė - Pasukamas spaustuvas - 2 vnt. deimantinis dresuoklis - Šlifavimo diskų laikikliai - apie 15 vnt. deimantinių/borazono diskų - įvairūs šlifavimo diskai - Spaustukiniai griebtuvai Ø1 – Ø20 mm