Plataus juostos šlifuoklis

SCM dmc sd 30

Sąlyga: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, X ašies padavimo greitis: 9 m/min, ruošinio aukštis (maks.): 50 mm, briaunos storis (maks.): 5 mm, garantijos trukmė: 12 mėnesiai, HOLZ-HER briaunų klijavimo staklės ARTEA 1020 Sandėlio įrenginys – su galimais tarpiniu pardavimu Pagaminimo metai: 2024 - Bazinis įrenginys 1020 - Edge Control BC15 valdymas su Vi.Se. (Visual Setting) - LED mašinos apšvietimas - Jungimo frezavimo agregatas Lrodpfx Afjxpgv Uj Iog - GluJet PUR / EVA klijams, su klijų rezervuaru - Frezavimas - Profilio gramdymas - Paviršiaus gramdymas - Poliravimo agregatas

Sąlyga: naudotas, Working width: 1350 mm Ljdpermucxjfx Af Isrg Number of sanding units: 2 pcs. Max. workpiece thickness: 160 mm Abrasive belt dimensions: 1370 x 2150 mm Feed motor: 0.75 HP Unitek Excel LC 1370 2N RKRT MODEL: Excel 2NRKRT 2-BELT MACHINE 1st BELT: ROLLER 2nd BELT: COMBINATION UNIT ROLLER/PAD FOR SOLID WOOD, VENEER, AND INTERMEDIATE LACQUER SANDING - Usable WORKING WIDTH mm: 1350 - SANDING BELT LENGTH mm: 1370 x 2150 - MAX. WORKPIECE THICKNESS mm: 160 - STEEL CALIBRATION ROLLER mm: 180 - Rubber-coated SANDING ROLLER mm: 180 - SANDING PAD WIDTH mm: 50 - BELT MOTOR POWER kW: 14.7 - BELT SPEED m/s: 18/16 - FEED MOTOR POWER HP: 0.75 - Variable speed drive for feed carpet, continuously adjustable SPEED m/min: 4/20 - HEIGHT ADJUSTMENT MOTOR HP: 0.33 - Mechanical BELT OSCILLATION “ECO GEAR PATENT SYSTEM” - 1 pc. DRUM BRAKE for belt braking - Pivoting ROLLER for belt tensioning - 3 pcs. PRESSURE ROLLERS; rubber-coated - EMERGENCY STOP STRIP at infeed - ELECTRONIC DISPLAY of workpiece thickness - 2 pcs. ROLLER TABLES with 2 rollers each at infeed and outfeed - AUTOMATIC CENTERING OF FEED CARPET - 1 EXTRACTION PORT with 160 mm diameter - AUTOMATIC TABLE POSITIONING PLEASE NOTE: New patented belt oscillation system: 1. Without valves 2. Without photoelectric barrier 3. Not sensitive to dust 4. Energy-saving, environmentally friendly system Since 2008, the machine model with this system operates continuously without lateral belt run-off! - Unitek steel calibration roller (same for all models) - Unitek flexible pressure pad before and after the roller (same for all machines with 1 roller) - Unitek grit compensation with mechanical grid-set with 6 positions (per piece – same for all models) - Unitek electronically segmented sanding pad with 24 segments (sanding width 1350) - Unitek belt motor power up to 18.4 kW instead of 14.7 kW (per motor) - Unitek surcharge for 2nd motor 14.7 kW (only for Excel 2-belt) - Unitek automatic table lowering in emergency stop (same for all models) - Unitek surcharge for frequency-controlled feed speed - Unitek surcharge for infeed/outfeed roller table with 4 rollers (same for all models) - Price per roller table - Unitek electronic control of machine functions with 12" touchscreen (same for all models) Automatic workpiece scanning with feed control --- Machine price in above configuration upon request! --- Options at additional cost: Surcharge for 3-belt machine Roller-Roller-Pad (Mod. 049): €8,390.00 Freight costs: €1,300.00 Assembly and instruction: €1,300.00 --- All prices stated are net prices plus statutory VAT (19%) --- (Technical data as per manufacturer – subject to change and errors excluded!)

Sąlyga: naujas, Gamybos metai: 2023, Demonstracinis įrenginys Pagaminimo metai: 2023 Įranga ir techniniai duomenys: Pagrindinė mašina 1057 XL C su Beckhoff liečiamu ekranu valdymui Ištraukiama ruošinio atrama 600 mm Įleidimo liniuotė ilga 1252 mm Dviejų variklių sujungimo frezavimo agregatas DIA sujungimo freza 70 x 64 x 30 mm Z2+2 su kairine ir dešine eiga Krašto padavimo sistema 1903 visiškai automatinė Glujet 301 klijų užnešimo sistema Automatinė papildymo funkcija Talpykla 1,4 kg klijų patronams (4 patronai) GluJet surinkimo bakelis Spaustuvas 1912-3 pneumatinis Purškimo įrenginys GM 201 už spaustuvo Atpjovimo agregatas 1918 pneumatinis Ištraukimo gaubtai atpjovimo agregatui Lsdpfxow I Uyte Af Iorg Kombinuotas frezavimo agregatas FR201 su DIA frezomis R=2 mm Forminis frezavimo agregatas 1832 Lentynų programos funkcija Radiusinė traukimo mentelė ZK 301 Lustų surinkimo dėžė Paviršiaus traukimo mentelė FK 701 Purškimo įrenginiai priekyje ir gale TR201 Poliravimo agregatas 1940 Vieta: Zolingenas Prieinamumas: trumpuoju laikotarpiu

Gamybos metai: 2006, Sąlyga: beveik kaip naujas (naudotas), Pneumatic tipper and leveler for band saws. Ljdpfjdy A A Nex Af Ierg

Sąlyga: naujas, SCM Olimpic 500 HT - Automatic Edge Banding Machine Brand new machine with warranty. - Olimpic 500 - Version “HP T-ER2” - "eye-S" control console (control panel) - Human-Machine Interface (HMI) software "Maestro active edge" - Fine trimming and radius scraper unit, radius = 1 mm - Fine trimming and radius scraper unit, radius = 2 mm - Electronic positioning of the upper pressure beam - Spacer at the infeed fence - "SAVENERGY" kit - Internal LED lighting for the cabin and edge banding area - "Nesting" tracer rollers - Separating agent spraying unit "AAR" 1 - Edge finishing spray device - Spray device for sensitive edges Ledpfx Aowkf Ihef Isrg - Jointing unit "RT-V1" - "EASY SIZE" device - Glue unit "VC-VM" - Ceramic lamp with infrared rays - Electronic positioning of the pressure rollers - End trimming unit "K-2 Radius" - Chamfer and radius trimming unit "R-HP Multiedge 2R" - Corner rounding unit "Round 2-A Multiedge 1R" - MULTIEDGE 3 kit, 3 automatic positions straight/R/R, for "Round 2-A" - Radius scraper unit "RAS-HP Multiedge 2R" - Flat scraper "RC-N" - Buffing unit "SP-V" The machine is brand new and still in its original packaging. Special offer: promotional machine at a special price.

Sąlyga: naujas, Vacuum Lifter BARBARIC B3, pivotable, incl. crane - Demonstration unit - Included: - Vacuum lifter BARBARIC uniWood UWL 3, 150 kg capacity Vertical and horizontal handling of flat, standard commercial boards (laminated boards, natural wood boards) up to a board size of 3,000 x 2,100 mm - Tilting range of 90° with pneumatic tilt mechanism - Complete version with hoist and appropriate safety devices (vacuum gauge and hand-operated slide valve with mechanical lock) - uniWood crossbeam with 2 suction pads Ø 270 mm on an adjustable beam (beam length: 1,500 mm) Included: - Option: reinforced version BARBARIC uniWood for slightly porous panels Load capacity: 250 kg with 2 oval suction pads, 500 x 250 mm, on an adjustable beam (beam length: 1,250 mm) and reinforced vacuum pump for porous materials. The reinforced version enables lifting of materials up to 250 kg. Lrodpfxou R Szao Af Ijg Included: - Option: BARBARIC uniWood comfort control All controls for the hoist and the vacuum lifter are combined in a single control unit—our special handling grip. This allows single-handed operation of the system and the load. The lifting process can be continuously regulated via frequency converter. The comfort version comes complete with hoist and corresponding safety devices (vacuum gauge and two-button safety control for load release). Included: - BARBARIC column-mounted slewing crane Load capacity at hoisting device: 250 kg The specified capacity refers to the effective load at the hoist. Barbaric slewing cranes are designed for handling tasks in all application areas and are extremely lightweight in construction. SSK consisting of column, console, and low-friction jib arm. Manual slewing and trolley travel. A suitable reinforced concrete floor (C20/R5, min. 20 cm) is required for installation. The static assessment of the floor must be provided and documented by the client. For installation on cracked concrete or ground with low load-bearing capacity, larger base plates are available upon request. Mounting: supplied with adhesive anchors for concrete floor. If ordered without hoist, please specify the desired cable or hose arrangement! Delivery includes: trolley, power supply, and compressed air connection. - New exhibition machine -

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Single-sided automatic edge banding machine with jointing unit, hot-melt glue application on straight workpieces (EVA/PUR glue pot with discharge function optional), 2-motor high-frequency end trimming station, HF combination milling unit, corner rounding unit, chain feed, motorized top pressure with encoder and ball-bearing double roller top pressure, extendable workpiece support rail, signal lamp for workpiece sequence, integrated line control for contactless control of processing functions, as well as L-Motion control (6-axis). Suitable for ABS, PVC, melamine and thick wood veneer roll material, as well as fixed lengths from 0.4 – 3.0/6.0 mm and workpiece height from 10 – 60 mm. Lodpfx Afsl Rix Ej Ierg • Two counter-rotating, application-controlled jointing units with diamond-tipped spiral jointing cutters ensure clean and tear-free jointing of the workpieces before edge banding. • Teflon-coated, quick-change glue pot with 1.5 kg capacity, leak-proof design with glue supply from below (excess glue is automatically recirculated to the glue pot), precisely controllable glue application via glue roller, separate adjustable glue roller temperature, electronic temperature control with automatic stand-by function (prevents glue from burning if the machine is not used for a longer period but remains switched on). Optional: EVA/PUR glue pot with discharge/cleaning function for quick colour change Optional: Quick-change system for glue pot • Pressure zone consists of a driven pressure roller synchronised with the glue roller and two smaller, oppositely tapered pressure rollers with spring tension, ensuring optimal bonding of the edging material to the workpiece. Motorized adjustment of the pressure zone (1x L-Motion) • High-frequency cross-cut saw equipped with two HF motors 0.55 kW, 12,000 rpm, two saw blades. Pneumatic swiveling from operator panel • High-frequency combination milling station, 2 powerful 0.55 kW high-frequency motors with carbide-tipped special cutters Motorized adjustment of the milling station (4x L-Motion) • Corner rounding unit: Automatic processing of front and rear corners up to 2 mm edge thickness for PVC/ABS edging material. (Not recommended for soft- and post-forming profiles). Option for single-sided (front or rear) or double-sided corner rounding. Motorized adjustment of the corner rounding unit (1x L-Motion) • Swiveling control panel with 10″ colour touchscreen, length counter and remote access module • Standard equipment includes LED lighting and LED-Motion system • Optional: Motorized infeed fence adjustable from the control panel (1x L-Motion) Optional finish units (3 free spaces): -Multi-radius scraper R1+R2, pneumatic ON/OFF control via air cylinder, radius changeover R1/R2 via pneumatic switching from the control panel -Flat scraper unit: Removes glue residues from the glue joint area with a gentle scraping action, pneumatic ON/OFF control via air cylinder -Polishing unit: 2 motors with 0.09 kW, 1,500 rpm provide a high-quality finish

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 008030, Priklijuotos briaunos tipas: plona briauna, stora briauna, masyvo mediena Klijavimo sistema: EVA, PUR, karštas oras Sujungimo frezavimas: taip Daugiafunkcinis agregatas: taip Maks. padavimo greitis: 25 m/min Maksimali plokštės storis: 60 mm Lsdpfxowvq Hgj Af Iorg Darbo agregatai: 8 vnt.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1990, veikimo valandos: 4 452 h, Funkcionalumas: visiškai funkcionalus, pjovimo aukštis (maks.): 120 mm, pagrindinis pjūklo diskas skersmuo: 380 mm, pjovimo gylis: 340 mm, Raimann KR 310 E 340/120 Multi-blade Saw with Movable Saw Blade - Made in Germany - Year of manufacture: 1990 - Technical documentation (DTR) - Operating hours: 4452 h TECHNICAL SPECIFICATIONS: Lederhig Espfx Af Isrg - Track width: 340 mm - Max. cutting height: 120 mm - Cutting height with movable blade: 85 mm - Motor power: 30 kW - Minimum workpiece length: 700 mm - Table width: 740 mm - Feed rate adjustable by inverter: 6–48 m/min - Three rows of pawls - Option for fitting a pressure shoe - Arbor diameter: 80 mm - Fixed arbor length: 190 mm - Electric cutting height adjustment - Electric spindle height adjustment - Four upper pressure rollers - Automatic central lubrication - Laser - Fence - Extraction port diameter: 250 mm Machine dimensions: 250 x 200 x 220 cm Weight: 2000 kg

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, Įmonė Tekstura d.o.o. parduoda naujas FOM Industry mašinas tik Slovėnijoje. Ljdpfx Asxu Uyljf Ijrg