Medienos smulkintuvas

Schuko ZM 700

Būklė: geras (naudotas), Gamybos metai: 1992, Chipper with hydraulic moving floor Rotor width: 700 mm Dsdowv Hmvjpfx Af Aekl Motor power: 11 kW Screen: 16 mm perforation PLC not yet installed Partially overhauled New rotor bearings

Būklė: labai geros būklės (naudotas), Four-sided planer SCM Compact XL Dkodpelat Hdofx Af Ajl - Planing width: 23 cm - Planing height: 13 cm - Electrically adjustable top head and feed rollers - All spindles adjustable vertically and horizontally - Bottom spindle: 4 kW, right and left spindles each driven by a 7.5 kW motor, top spindle: 5.5 kW, universal spindle: 5.5 kW Machine in very good condition

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, variklio galia 11 kW įkrovimo bunkeris 940x700 mm Dedpfx Asyabb Uef Askl spaudimo stalčius veleno ilgis 700 mm veleno apsukos 110 aps./min našumas 180-220 kg/h

Būklė: naudotas, Gamybos metai: 2018, Startech CN MAIN FEATURES FLEXIBLE AND INDIVIDUALLY CONFIGURED PRODUCTION COMBINED WITH SPEED AND PRECISION DRILLING FROM ABOVE WITH REFERENCE TO THE TOP SIDE OF THE PANEL ALLOWS FOR ABSOLUTE PRECISE PROCESSING NUMERICAL CONTROL WITH 7" COLOUR SCREEN: SIMPLE AND INTUITIVE TECHNICAL DATA Startech CN AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Working area drilling/grooving mm 0 x 800 / 0 x 800 Stroke of X-axis mm 750 Max. traversing speed X-Y axes m/min 25 DRILLING UNIT Vertical spindles number 7 (4X-4Y, one shared) Horizontal spindles (along Y-axis) number 2 (1+1) Horizontal spindles (along X-axis) number 1 Fixed groove saw (direction) X Diameter of groove saw mm 100 Max. thickness of groove saw mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Groove saw speed rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air requirement bar 6 Compressed air consumption Nl/cycle 90 Extraction requirement m³/h 1200 Extraction air speed m/sec 20 Extraction connection diameter mm 120 GENERAL FEATURES Universal CNC drilling machine with a working table with fixed gantry and moving workpiece for performing the following operations: - Vertical drilling on the panel surface - Horizontal drilling on all four workpiece sides - Grooving with an integrated groove saw in the 'X' direction Self-supporting structure Machine base made of steel tubular construction to provide a large base for accommodating the working table. The structure rests on 3 self-levelling feet. The electrical control cabinet is integrated into the machine base. Central Bakelite support table 'Easy Motion': - an MDF sector for through drilling, automatically retractable for horizontal drilling - an infeed roller to facilitate panel loading - a rear roller track to ease panel sliding - left and right stops - a central alignment device with manual adjustment The left and right stops must be used to drill horizontally in the 'X' direction on the two opposite panel sides. Panel positioning along the X-axis is via vacuum suction cups. Aggregates carrier This is a gantry structure made from steel tube. The main working unit is installed on the gantry. F10L drilling unit includes: - 7 independent vertical spindles - drill shank D10 mm - spindle pitch 32 mm - 2 horizontal drilling heads, 1 in X direction with one drill bit, 1 double drilling head in Y direction (1 + 1, drill shank D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - pneumatic vertical travel per spindle 70 mm - pneumatic horizontal travel of the drilling unit Workpiece positioning and drive of the working unit A CNC-controlled vacuum cup clamps and positions the workpiece sequentially under the working unit during processing. Movement along the X and Y axes is on THK guides with motion transmission via reinforced toothed racks. Z-axis movement is pneumatic on ball-bushing guides with stop position adjustable via the unit's positioning. Working unit positioning uses advanced drive and technology. -CONTROL The control software is specifically designed for use Dsdpfxovwbp Ae Af Askl

Būklė: naudotas, Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, kuro tipas: elektrinis, - vokiška gamyba - pagaminimo metai: 1999 TECHNINIAI PARAMETRAI: - įkrovimo anga: 600 x 800 mm - rotoriaus skersmuo: 175 mm - rotoriaus ilgis: 600 mm - bendra galia: 18,5 kW - peilių skaičius: 14 vnt. - pasukami pjovimo peiliai: 30 mm x 30 mm - sietas: Ø 15 ir 12 mm - AUTOREVERSAS - HIDRAULINĖ STALČIUS - spaudžiamo stalčiaus aukštis: 180 mm - rotoriaus apsukos: 80–120 aps./min. - ištraukimo antgalio skersmuo: Ø 200 mm - matmenys (ilgis/plotis/aukštis): 200 x 120 x 160 cm - svoris: 1200 kg Djdpfjw H Rn Eox Af Askl

Būklė: naudotas, Gamybos metai: 2000, Veržlių kiekis eilėje: 11 Dksdpsxc Hi Uefx Af Ajl Horizontalių veržlių kiekis: 3 Gręžtuvo galva puodelio vyrio angai: taip, Blum Grąžtų žingsnis: 32 mm Galia: 2,2 kW Gręžimo agregatas: pasukamas

Būklė: naudotas, Verpstukų skaičius: 6 vnt. Darbinis plotis: 230 mm Obliavimo aukštis: 120 mm Staliuko ilgis: 2.000 mm Obliavimo ir profiliavimo automatas Weinig Profimat 23 keturių pusių obliavimui ir profiliavimui, su ATS sistema. 1 verpstukas: apačioje 2 verpstukas: dešinėje 3 verpstukas: kairėje Dkedpfx Asw I A Sqef Asl 4 verpstukas: dešinėje 5 verpstukas: viršuje 6 verpstukas: apačioje Valdymas: ATS

Gamybos metai: 1989, būklė: labai geros būklės (naudotas), Model: ST-10 Dodpfxofl Dtpe Af Askl TABLE DIMENSIONS: 1000 x 800 mm TABLE HEIGHT: 840 mm

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, CNC profiliavimo centras Weinig Conturex 2 frezavimui, gręžimui ir pjovimui skersiniame ir išilginiame apdirbime Tipas C 124 Pagaminimo metai 2011 Dkedpsypb Adofx Af Asl Labai gera būklė Oertli įrankių komplektas Darbinis plotis 40–260 mm Darbinis aukštis 25–150 mm PowerGrip veržtuvinis stalas, stalo atramos ilgis 2 x 2280 mm Rušinio ilgis be pakartotinio padėties keitimo 220 – 2700 mm Rušinio ilgis su vienu padėties keitimo ciklu 2700 – 4500 mm Rušinio ilgis su keliais padėties keitimo ciklais 4500 – 6000 mm

Būklė: naujas, Technical data: Number of rollers: 4 Roller size: 120 x 60 mm Maximum stroke: 20 mm Number of speeds: 8 Feed speed: 2-4-5.5-6.5-11-13-16.5-33 m/min Djdpfxov Iz N Re Af Askl Distance between rollers: 133-143-145 mm Distance between first and last roller: 421 mm Motor speed: 1400/2800 rpm Total power: 0.75 kW