Keturpusis oblius WEINIG tipas Profimat 23

Weinig Profimat 23

Būklė: naudotas, Velenų skaičius: 5 vnt. Darbinis plotis: 230 mm Nusavojimo aukštis: 120 mm Nusavojimo stalo ilgis: 2000 mm Nusavojimo ir profiliavimo automatas „Weinig Profimat 23“, skirtas medienai apdirbti iš keturių pusių, komplektuojamas su vienu komplektu nusavojimo galvučių. Velenas 1: apačioje / 4 kW / 40 mm Velenas 2: dešinėje / 5,5 kW / 40 mm Gjdpfx Adoy Dh Spsgobp Velenas 3: kairėje / bendras variklis su #2 / 40 mm Velenas 4: viršuje / 4 kW / 40 mm Velenas 5: apačioje / 4 kW / 40 mm

Būklė: naujas, Gamybos metai: 2025, Dividing band saw for lamellae and veneers CENTAURO R800+RVP 210 Maximum cutting height: 38 cm Maximum cutting width: 210 mm Main motor power: 11 kW RVP 210 feed: manual or pneumatic opening Stepless feed speed adjustment: up to 30 m/min Main motor power: 11 kW Blade length: 5530–5380 mm Maximum blade width: 80 x 0.8 mm Infeed table with rollers Year of manufacture: 2025 Gsdpfjvz A S Tjx Adgebp

Būklė: geras (naudotas), working width 230 mm working height 120 mm spindle diameter 40 mm 4 heads + glazing bead cutting unit ATS panel control Gbsdpfx Asvtt Ayodgsp head adjustment in two axes electric adjustment of the pressure beam stepless feed speed adjustment The machine operated in line with other machines.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1995, Four-Sided Planer Weinig Profimat 23E - German production - Year of manufacture: 1995 - Right and left spindles equipped with end-milling cutters ensuring parallelism and a 90° right angle - Element width measurement - Electronic width adjustment TECHNICAL PARAMETERS: Planing width: 230 mm Planing height: 120 mm Electronic planing width control 1st (bottom) spindle: 4 kW 2nd (right) spindle: 4 kW 3rd (left) spindle: 4.2 kW (end milling) 4th (right) spindle: 4.2 kW (end milling) 5th (top) spindle: 7.5 kW Element width measurement Electric adjustment of feed roller height Electric adjustment of top spindle height Spindle diameter: 40 mm Six upper steel rollers One upper rubber roller One feed roller integrated into the table Pneumatic pressure system Gsdpfx Aeibq Nisdgsbp Feed driven by cardan shafts Length of infeed table: 2,470 mm Port diameter: 140 mm Machine dimensions: 456 x 240 x 220 cm Weight: 4,000 kg

Būklė: naujas, Gamybos metai: 2024, Boring and Inserting Machines Rilesa Vlg 2200, new, March 2024 Make: Rilesa Model: Vlg 2200 Description: Condition: new Year: 2023 Startup Type: to be agreed Shipping Cost: Buyer Protection Delivery Terms: EXW (EX WORKS) – COLLECTION BY BUYER Gbodpfx Aegbpmhjdgjp Category: Machine Tool Accessories in Poland Subcategory: Drill Bits Subcategory 2: Drilling Machines Description: DRILLING MACHINE WITH AN 8-SPINDLE MAGAZINE, TWO FRONT RIGHT AND LEFT, 3 TOP, AND 3 REAR. Year: 2024 The machine can be equipped with additional drilling heads; we are also a manufacturer of heads available in various spacings and with varying numbers of drilling spindles, tailored to individual requirements.

Būklė: labai geros būklės (naudotas), Catalogue number 7994 Gedpfoy T Nu Dsx Adgobp TECHNICAL DATA - Maximum working width: 230 mm - Maximum working height: 130 mm 7 spindles: 1) Bottom horizontal: 230 mm, 4 kW 2) Right vertical: 130 mm 3) Left vertical: 130 mm (spindles 2 and 3), 11 kW 4) Top horizontal: 230 mm, 5.5 kW 5) Top horizontal: 230 mm, 5.5 kW Top horizontal spindles 4 and 5 adjustable electrically up/down 6) Bottom horizontal: 230 mm, 4 kW 7) Universal: 230 mm, adjustable 360° angle, 5.5 kW - All spindles adjustable up/down and right/left - Spindle diameter: 40 mm - 4 top infeed feed rollers, toothed - 4 top outfeed feed rollers, rubber, smooth finish, including 3 double rollers - 1 metal feed roller from below - Feed drive on Cardan shafts - Pneumatic feed roller pressure - Variable feed speed control via inverter - Feed motor: 3 kW - Working pressure: 6–10 bar - Electric thickness adjustment - Centralized table lubrication - Infeed table length: 1960 mm - Extraction port diameters: 3x120 mm, 4x140 mm - Dimensions (L/W/H): 5360x1800x1660 mm - Weight: approx. 4000 kg ADVANTAGES – German-made, WEINIG brand – With 7 heads – DTR technical documentation – Universal spindle – Used planer, in very good condition Net price: 75,900 PLN Net price: 18,070 EUR (based on 4.2 EUR exchange rate) (Prices may change with significant exchange rate fluctuations)

Būklė: naudotas, Techniniai duomenys: Maksimalus obliavimo plotis: 230 mm Maksimalus obliavimo aukštis: 130 mm Veleno skersmuo: 40 mm Velenų skaičius: 5 Velenų eiliškumas: apačia, dešinė, kairė, viršus, apačia Kiekvienas velenas turi atskirą variklį Viršutinių plieninių traukiančių volų skaičius: 4 Viršutinių guminių traukiančių volų skaičius: 1 Ištraukimo jungties skersmuo: 2 x 120 mm Sklandus padavimo reguliavimas: TAIP Padavimas per kardanas: TAIP Darbinio stalo tepimo siurblys: TAIP 1 lygus volas stalviršyje Slėgis: 6 atm. Elektrinis korpuso pakėlimas Gbsdszguw Uopfx Adgjp Maitinimas: 400 V Bendra galia: 29 kW Bendri matmenys: Ilgis: 3500 mm Plotis: 1700 mm Aukštis: 1800 mm

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, CASADEI F 25 LL FK - Spindle moulder with tilting spindle and table extensions Spindle moulder with tilting spindle from -45° to +45° Robust steel and cast iron construction Dynamically balanced milling unit anchored to the worktable Especially sturdy design Smooth operation due to precision assemblies and high own weight Standard with forward/reverse rotation and electronic interlock during direction change 5 speeds from 3000 to 10000 rpm Speed adjustment is simple and convenient from the machine side Standard with MK 4 quick-change spindle system Large cast iron worktable for lasting precision Easy handling thanks to controls and speed indicator on the machine front Milling fence with fine adjustment and aluminium fence jaws as standard High-performance industrial motors Equipment details: Milling fence Milling fence adjustable with crank/handwheel from the front panel With digital readout Quick-change spindle MK 4 quick-change spindle system standard on all CASADEI F 23 and F 25 models Optional sliding table Optional sliding table for small tenoning operations and slotting Scope of delivery: Manually tiltable spindle from +45° to -45° Speed display via LED on the front Aluminium fence jaws Curved milling guard Forward/reverse spindle rotation MK 4 quick-change spindle Milling fence adjustable with crank/handwheel from the front panel with digital readout Table extension left and right (2500 mm length) Pull-out workpiece support (2500 mm length) Model: CASADEI F 25 LL FK Article No.: 5220728 Technical data Worktable dimensions: 2500 x 810 mm Spindle tilting range: +45 to -45 degrees Usable spindle length Ø 30-35 mm: 140 mm Usable spindle length Ø 40-50 mm: 180 mm Spindle stroke: 90 mm Godpsdqzcxefx Adgobp Max. tool diameter for profiling: 250 mm Max. tenoning tool diameter: 350 mm Max. form cutter diameter: 160 mm Max. retractable tool diameter: 320 x 60 mm Speeds, 5-stage: 3000/4500/6000/8000/10000 rpm Motor power 400 V / 50 Hz / S6-40%: 7 kW Weight: 480 kg Extraction nozzle diameter at fence: 1 x 120 mm Extraction nozzle diameter under table: 2 x 80 mm Location: Ex stock 54634 Bitburg - Available immediately -

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Parduodame WEINIG Hydromat 23 keturpusę obliavimo ir profiliavimo staklę su 9 velenais, skirtą pramoniniam masyvių medienos ruošinių apdirbimui. Staklės su grioveliuotu (rifliuotu) stalu patikimam ruošinių padavimui ir tiksliam apdirbimui. Pagrindinė informacija Gamintojas: WEINIG (Vokietija) Modelis: Hydromat 23 Konfigūracija: 9 velenų Metai: 2000-ųjų pradžia Būklė Veikianti staklė Intensyviai naudota, nusidėvėjusi Reikalingas aptarnavimas/techninis remontas Komplekte padavimo stalas, kuris keletą metų nenaudotas ir reikalauja priežiūros. Gbedpfszgt Daox Adgjp Pardavimo sąlygos Galima atsiimti iš karto Išrinkimą ir transportavimą organizuoja pirkėjas

Būklė: naudotas, Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, Siūlome įsigyti WEINIG Profimat 23 keturpusį obliavimo ir profiliavimo staklę, skirtą masyvios medienos apdirbimui pramoninėje gamyboje. Įrenginys veikia ir yra darbinės būklės, tačiau dėl ilgo naudojimo reikia techninio aptarnavimo ir priežiūros. Pagrindinė informacija Gamintojas: WEINIG (Vokietija) Modelis: Profimat 23 Metai: apie 1997 Įtampa: 380 V / 50 Hz Techninė charakteristika Kelios velenų padėtys (apatinis, dešinys, kairys, viršutinis) Veleno apsukos: apie 6000 aps./min. Veleno skersmuo: 40 mm Gbodpszgtwtsfx Adgjp Padavimo greitis: apie 5–24 m/min Darbinis plotis: apie 10–230 mm Darbinis aukštis: apie 4–120 mm Būklė Veikiantis įrenginys Labai naudota būklė Reikalingas aptarnavimas / priežiūra Tinka tolesniam naudojimui, renovacijai arba atsarginėms dalims Pardavimo sąlygos Įrenginys prieinamas iš karto Išrinkimą ir transportavimą tvarko pirkėjas

Būklė: naujas, *TECHNICAL SPECIFICATION:* Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Consumer circuits: 1 or 2 as standard Temperature range: -45°C to +130°C Medium: Water / glycol mixture Dimensions LxWxH (without connections): 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300 kg 2-circuit: approx. 1500 kg *EQUIPMENT HIGHLIGHTS:* - Controls: Temperature control (standard) - Control via PLC with touchscreen - Analog and digital interfaces Gbjdpfx Ajg Ezarsdgjp - Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) - Heating control via solid-state relays (SSR) - Flow measurement in the internal circuit for flow monitoring (INFO: The system automatically warns and then shuts down in case of incorrect water/glycol mixture) - Pressure-controlled cooling water regulator (INFO: Significantly more precise than temperature control) - Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metal) (non-ferrous metal-free option available) - All medium-carrying components and pipelines insulated for low-temperature applications - Water-cooled condenser (air-cooled on request) *OPTIONS:* - Flow rate control: up to 100 l/min, >4 l/min +/- 5% of measured value - Pressure control: 0.5 to 4.5 bar (control range) - Compressed air monitoring - Test specimen draining via compressed air - Cooling water monitoring - Supply pressure limitation - Further custom options possible upon request and technical review Visit our website for more details or other performance classes. *This device complies with European directives. Other directives and standards are only fulfilled if specified in the order confirmation. This technical specification reflects the standard configuration; customer-specific requests differing from the standard are listed in the quotation or order confirmation.*

Būklė: dilaminuotas dirbtuvėje (naudotas), Number of spindles: 6 pcs Working width: 230 mm Planing height: 120 mm Planer table length: 2500 mm Feed motor: 3 kW Feed speed: 5-24 m/min Total connected load: 27 kW Dimensions (L/W/H): 3900 x 2200 x 2000 mm Machine weight: approx. 2500 kg Weinig Four-side Planer Profimat 23 Window Version with glazing bead cutting or usable as grooving spindle ATS control and program management ----- Machine factory-refurbished in 2024 by Weinig. Technical Data - Summary (possibly including additional accessories – please inquire) ----- General ----- > Working width: 230 mm Godsxpn T Uspfx Adgobp > Working height: 120 mm > Number of spindles: 6 pcs. > Planer table length: 2500 mm > Feed motor: 3 kW > Feed speed: 5-24 m/min > Total connected load: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight, approx.: 2500 kg Spindle Arrangement ----- > Spindle 1: bottom > Spindle 2: right, pneumatically controlled up/down > Spindle 3: left > Spindle 4: top > Spindle 5: bottom > Spindle 6: glazing bead saw, pneumatically controlled up/down Spindle Specifications ----- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter > Spindle 6: glazing bead saw, 2.2 kW, 6000 rpm, 40 mm diameter Further Features ----- > Glazing bead cutting or usable as a grooving unit > ATS control, automatic 2-axis positioning for width and height (left and top spindle) with program memory for 99 programs > Machine operation: window package Combined control of right spindle and glazing bead discharge via manual selector switch at operator panel > Spindles with mechanical digital readout (Technical data according to manufacturer specification – no liability assumed!)

Būklė: dilaminuotas dirbtuvėje (naudotas), Velenų skaičius: 8 vnt. Darbo plotis: 230 mm Obliavimo aukštis: 120 mm Weinig obliavimo linija ----- Sudaryta iš šių atskirų mašinų: Poz. 1: Weinig Profimat 23 E, keturpusė obliavimo staklės, sandėlio nr. 2803 5 velenai + stiklo briaunų pjūklas Poz. 2: Weinig Uniplan 23, sandėlio nr. 2804 Baigiamojo ir hidroobliavimo staklės su 2 horizontaliais velenais Poz. 3: Weinig RF 15, sandėlio nr. 2805 Išilginis-skersinis-išilginis konvejeris su ruošinio grąžinimu operatoriui Išsamūs mašinų aprašymai pateikiami nurodytais sandėlio numeriais. Gedpfx Adoxpn Tujgobp (Techninė informacija pagal gamintoją, be garantijos!)

Būklė: naudotas, Slotting spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm Used Weinig Unicontrol 6 window machining center ----- For sale on behalf of customer Manufacturer’s description: Designed for the production of individual parts, components, and small series. Spindle arrangement: One crosscut saw, a single tenoning and slotting spindle, a right-hand profiling spindle, a tenoning/slotting spindle, and a profiling spindle suitable for stacking multiple tools on top of each other, with pneumatic spindle movement. Slot table with motorized table movement and automatic transfer into the continuous, chainless rubber roller feed of the profiling unit. Height adjustment of the feed by manual control. Godpex Tu N Hsfx Adgjbp Workpiece clamping via 2 pneumatic clamping cylinders. Length stop with scale and magnifier for precise frame or sash external dimensions. Control of tool positions (longitudinal and cross machining) via selector switch on the operator panel. Technical data ----- Crosscut saw ----- Number of tools: 1 Spindle speed: 2,800 rpm Spindle diameter: 40 mm Maximum tool diameter: 350 mm Motor: 3 kW Tenoning and slotting spindle ----- Number of tools: 3/4 pcs. for timber thicknesses IV 68 – IV 92 Spindle speed: 3,500 rpm Spindle diameter: 50 mm Tool clamping length: 320 mm Maximum tool diameter: 320 mm Motor: 11 kW Profiling spindle ----- Number of tools: 3/4 pcs. for timber thicknesses IV 68 – IV 92 Spindle speed: 6,000 rpm Spindle diameter: 50 mm Tool clamping length: 320 mm Maximum tool diameter: 232 mm Motor: 11 kW Special equipment: Synchronised spindle ----- Pneumatically actuated forward/backward motion for tear-free profiling of window sashes, frames, and doors. Spindle diameter: 50 mm, 4 kW Tool clamping length: 120 mm, tool min. diameter: 112–140 mm, max. tool diameter: 232 mm, spindle speed: 6,000 rpm Motor upgrade for synchronised spindle from 4 kW to 7.5 kW Screen control for 99 window types. 1 type can contain up to 8 different parts, each with 2 end profiles and 2 longitudinal profiles. Production possibilities: single pieces, double pieces, by frame, series production, profiling. Data input via keyboard with integrated user guidance and error diagnostics. 1 Groove spindle from above ----- Motor power: 2.2 kW Speed: 6,000 rpm Spindle diameter: 40 mm, with keyway 10 x 4 mm Mounting length: 13 mm Clamping length: 40 mm Axial stroke: 2 positions Radial stroke: 2 positions Max. tool diameter: 130 mm Motor upgrade for groove spindle from 2.2 to 3 kW 1 hardware recessing unit, right: ----- For routing the hardware groove during profiling or for grooving in the longitudinal profile. Pneumatic horizontal movement with selector switch on the operator panel. Motor power: 2.2 kW Speed: 6,000 rpm Spindle diameter: 40 mm Clamping height: 125 mm Tool cutting circle: min. 140 mm, max. 180 mm Home position below table: 10 mm Hardware router in special design: Clamping length 150 mm Axial stroke 80 mm, 3 positions 3 tools Radial stroke, 2 positions Motor upgrade for hardware routing spindle from 2.2 to 3 kW Hardware routing spindle for 230 mm tool diameter in and above table Electrical height adjustment of the feed with selector switch on the operator panel for 2 timber dimensions, includ...

Būklė: paruoštas naudoti (naudotas), Number of spindles: 6 units Working width: 230 mm Planing height: 120 mm Planer table length: 2500 mm Feed motor: 3 kW Feed speed: 5–24 m/min Total power requirement: 27 kW Dimensions (L x W x H): 3900 x 2200 x 2000 mm Machine weight approx.: 2500 kg Weinig Four-Side Planer Profimat 23 Window Version with glazing bead cutting unit, alternatively usable as a grooving spindle ATS control and program control ----- Machine is currently being overhauled and function-tested Technical Data Summary (additional accessories, if included, upon request) ----- General ----- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 pcs. > Planer table length: 2500 mm > Feed motor: 3 kW > Feed speed: 5–24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight, approx.: 2500 kg Spindle Arrangement ----- > Spindle 1: bottom > Spindle 2: right, pneumatically controlled up/down > Spindle 3: left > Spindle 4: top > Spindle 5: bottom > Spindle 6: glazing bead saw, pneumatically controlled up/down Spindle Description ----- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter > Spindle 6: glazing bead saw 2.2 kW, 6000 rpm, 40 mm diameter Additional Features ----- > Glazing bead cutting or usable as a grooving unit Godpfx Adou Su Hujgjbp > ATS control, automatic 2-axis positioning for width and height (left and top spindle) with program memory for 99 programs > Machine operation: window package Combined control of right spindle and glazing bead discharge via manual selector switch on the control panel > Spindles with mechanical digital display Option: Used planer heads available (technical data as per manufacturer – no guarantee!)