Tiesintuvas

SCHLEICHER RML 6-53/96

Sąlyga: naujas, Gamybos metai: 2025, Material width: 100 mm Material thickness: 15 mm Number of straightening rollers: 9 Crsdpsurni Usfx Admok Straightening speed: 7 m/min Total power requirement: 0.75 kW Machine weight: approx. 380 kg Space requirement: approx. 710 x 920 x 1360 mm Equipment: - 5 driven lower rollers - 4 adjustable upper rollers - Max. cross-section: approx. 800 mm² - Mobile use on castors - Operating manual

Sąlyga: naudotas, Gamybos metai: 1980, mašinos/transporto priemonės numeris: A-07/471A, Sheet width - max.: 130 mm Straightening roll diameter: 40 mm Number of straightening rolls: 5 Draw rolls: 2+2 Sheet thickness - min.: 0.4 mm Sheet thickness - max.: 3.5 mm Crsdpfxocxxx Ro Admok Weight: 0.4 t Space requirement approx.: 0.6x0.65x1.15 m Strip straightening machine with integrated steplessly adjustable VARI drive, forward and reverse operation, mode selector switch for manual and automatic, entry roller basket, position display for straightening rolls via analog display, adjustment of straightening roll positions via handwheels, automatic loop control, very good condition

Sąlyga: geras (naudotas), Gamybos metai: 2019, mašinos/transporto priemonės numeris: 110-044731, Pasiūlymas 25160 Techniniai duomenys: - Keliamoji galia: 3.200 kg - Vėžės plotis apie: 9.090 mm Codpsw S D Emjfx Admork - Praėjimo aukštis apie: 360 mm - Vežimo sijos ilgis apie: 2.400 mm - Ratų bazė: 1.900 mm - Kablio eiga apie: 6.000 mm - Perjungimas: 2 / 1 - Greičiai: - Vežimėlis apie: 20 m/min + 5 m/min - Kėlimo mechanizmas apie: 5 m/min + 0,8 m/min - Krano eiga apie: 20 m/min + 5 m/min - Valdymas radijo pultu - Bendras svoris – kranas apie: 1.600 kg

Gamybos metai: 1960, Sąlyga: visiškai atnaujintas (naudotas), mašinos/transporto priemonės numeris: 1733, Vertical internal broaching machine with index plate by Karl Klink Type: RSI10DT Machine No.: 1733 Cedogyd S Sepfx Admjrk Year of manufacture: 1960 Weight: 4.9 t Broaching force: 10,000 kg Equipped with index plate (2 stations) Power supply: 380V / 50Hz Rated current: 35 A Connected load: 7.5 kW The machine has been fully overhauled and is therefore in very good condition.

Gamybos metai: 1991, Sąlyga: paruoštas naudoti (naudotas), Y 018 Broaching Machine – Vertical Manufacturer: Hönnema Model: HSR 9/1250 RST Machine Number: 166/HM 510275 Year of Manufacture: 1991 Crsdpehf A I Nefx Admek Pulling Force: 9 tons Stroke: 1,250 mm Footprint: approx. 230 x 120 cm With automatic feed External broaching possible with device

Gamybos metai: 1964, Sąlyga: visiškai atnaujintas (naudotas), mašinos/transporto priemonės numeris: 2041, Vertical internal broaching machine with index plate by Karl Klink Type: RSI8DT1 Machine No.: 2041 Year of manufacture: 1964 Weight: 3.2 t Broaching force: 8,000 kg Csdpogyd S Djfx Admerk With index plate (2 stations) Power supply: 380V / 50Hz Rated current: 25 A Connected load: 5.5 kW The machine has been completely overhauled and is therefore in very good condition.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2000, Arthur Klink RISH 6.3 × 1000 × 400 – Techninės specifikacijos Staklių tipas: horizontalioji vidinė dantavimo staklė Gamintojas: Arthur Klink Modelis: RISH 6.3 × 1000 × 400 Pagaminimo metai: 2000 Traukos (dantavimo) jėga: 6,3 tonos (apie 63 kN) Maksimalus dantavimo ilgis (eiga): 1 000 mm Didžiausias ruošinio skersmuo: apie 420 mm Stalo angos (kiaurymės) skersmuo: apie 80 mm Dantavimo greitis: hidrauliškai be laipsnių reguliuojamas nuo 1 m/min iki 7 m/min Atgalinis greitis: hidrauliškai be laipsnių reguliuojamas nuo 7 m/min iki 25 m/min Bendri matmenys (plotis × gylis × aukštis): apie 5 700 × 600 × 1 900 mm Energijos tiekimas: 380 V, 50 Hz, bendra galia apie 4 kW Staklių svoris: apie 2 300 kg Aušinimo ir tepimo sistema: integruota aušinimo/tepimo stotis Crodek S U Hcjpfx Admek Alyvos ir drožlių lovio ilgis: apie 2 000 mm

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 1986, keliamoji galia: 4 000 kg, Manufacturer: KONE Crsdpfx Asumt Irodmek Note: MK10L1 Year of manufacture: 1986 Span: 9.3 m Load capacity: 4 t Lifting height: 6.3 m Wired remote control Net weight: 2,550 kg Additional sizes/details can be found in the photos.

Gamybos metai: 1998, Sąlyga: labai geros būklės (naudotas), mašinos/transporto priemonės numeris: TH20010018, Demag Overhead Crane Crane System Crane Runway Indoor Crane Crane Payload / lifting capacity max. 3.2t - 3200kg, span 13,300 mm External dimension with end carriages approx. 13,500 mm Crane with frequency inverter control and servo motors!!! 2x Demag DH wire rope hoists with pendant and radio remote control RC-J for single or tandem operation of both hoists Overall height from top of crane to hook approx. 900 mm End carriage length with buffers approx. 2,500 mm Hoisting height of wire rope hoist 6,000 mm Weight approx. 3,200 kg Incl. 2x 25m running rails HEB400 (400x300mm), incl. power rails!!! Girder lengths per side: 1x approx. 15m 1x approx. 10m Support spacing 10/10+5m Crane is dismantled, immediately available ex-location 75053 Gondelsheim Very good used condition ----- Column-mounted slewing cranes and wall-mounted slewing cranes also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Crsdpfsv A Rr Djx Admsk Shipping by freight forwarder possible, please request based on postcode Collection preferred

Sąlyga: labai geros būklės (naudotas), Overhead Travelling Crane + STAHL ST2010 Hoist • Lifting Capacity 2000 kg • Length 10.42 m For sale: a complete, fully operational overhead travelling crane equipped with a high-quality STAHL ST2010 chain hoist with a lifting capacity of up to 2000 kg. The set is used but in very good technical condition. ✅ Technical Specifications: * Type: Single-girder overhead travelling crane * Beam length: 1042 cm (10.42 m) * Lifting capacity: 2000 kg Cedswcq Epopfx Admsrk * Hoist: STAHL ST2010 – a proven, reputable unit * Power supply and cable management along the entire length of the runway * Stable, steel construction – ideal for a production hall or industrial workshop