Kaiščių gręžimo mašina Scheer DB4

Scheer DB4

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 1996, veikimo valandos: 350 h, Funkcionalumas: visiškai funkcionalus, Universal Dowel Hole Boring Machine DB 4 This used SCHEER Universal Dowel Hole Boring Machine DB 4 has been function-tested (not newly repainted). All worn parts and seals have been replaced, and the machine geometry was re-adjusted to ensure maximum precision. The SCHEER Universal Dowel Hole Boring Machine DB 4 is specially designed for structural drilling, row drilling in the 32 mm pitch system, and for drilling various types of fittings; it enables all of these tasks to be carried out quickly, precisely, and with minimal setup times. Operation is straightforward via symbols and a 4-position program pre-selection control, allowing changeover to new work operations in seconds. Central adjustment of the removable side stops ensures that workpieces are always flush with the front edge, allowing for precise drilling of left and right workpieces. It does not matter whether parts are cut to exact dimensions or at right angles. Corner joints with dowels are always flush both at the edge and on the face—something that even CNC machines can hardly achieve with the ease and speed of a SCHEER DB 4. Safety clamping system across the entire table width holds the workpieces directly beneath the drilling beam. The guide rail has three adjustable flip stops. Continuous table supports make feeding and drilling long workpieces easier, while fold-up workpiece support tables facilitate row and fitting hole drilling. 2 drilling units Drilling motors: Type BM 602-230/400 Volt, 50 Hz, n = 2860 rpm, 2.2 kW output 25-spindle gearbox Spindle pitch 32 mm (other spindle pitches upon request) For surface and end-face drilling. The vertical drilling unit is equipped with an oil brake for tear-free through-hole drilling in row drilling operations. The machine's control cabinet has been completely rebuilt and upgraded to the new SIEMENS LOGO! control system, ensuring the long-term operational safety of the machine. Gantry passage: max. 950 mm Chodpfjwq S E Hsx Admof Working length: max. 2360 mm With pneumatic rack adjustment.

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 690924, Connected load: 380V 1.84kW Speed: 2840 rpm Number of spindles: 21 units, 32 mm pitch Spindle spacing: 640 mm Spindle rotation direction: 11x right-hand, 10x left-hand, M10 thread Codpfx Aoh U Damjdmehf 2x safety clamps Pneumatic foot switch Table size: 880 x 400 mm 1x side stop with 2 flip stops 1x base stop 1x mitre stop Unfortunately, we are unable to respond to inquiries without complete contact details.

Sąlyga: beveik kaip naujas (naudotas), This used SCHEER Universal Dowel Hole Boring Machine DB 4 has been function tested and worn parts have been replaced; during this process, the machine geometry was also readjusted to ensure maximum precision. The SCHEER Universal Dowel Hole Boring Machine DB 4 is specifically designed for drilling construction holes, line boring in the 32-mm grid system, and boring various types of fittings; it allows all these tasks to be completed quickly, precisely, and with minimal setup times. The simplest operation is provided via symbols and four program pre-selection controls for instant changeover to the next operation. Central adjustment of the removable side stops ensures continuous alignment at the front edge and precise drilling of left and right workpieces. It makes no difference whether the parts are cut to exact size or angle. The doweled corner joint is always flush, both at the edge and the surface! You cannot achieve this simplicity and speed on any CNC machine as with the SCHEER DB 4. Safety clamping system across the entire table width, clamping the workpieces directly at the drilling beam. Stop rail with three adjustable flip stops. Continuous table supports ease feeding and drilling of long workpieces; fold-up workpiece support tables facilitate line and fitting drilling. 2 drilling units Chsdpfx Adeu Rqi Aemjf Drill motor type BM 602-230/400 Volt, 50 Hz, n= 2860, 2.2 kW output 25-spindle attachment gearbox Spindle pitch 32 mm (other spindle pitches available on request) For face and edge drilling. The vertical drilling unit is equipped with an oil brake to allow tear-free through-hole drilling for row boring. The machine's control cabinet has been completely rebuilt and retrofitted with new SIEMENS LOGO! control. This ensures the machine’s operational reliability for the future! Portal clearance: max. 950 mm Working length: max. 2360 mm

Sąlyga: naudotas, Type: DB 5 Condition: function-tested, very good, used - Boring head with 21 spindles, 32 mm pitch - Unit swivels up to 90 degrees - 2.2 kW motor - Max. drilling depth 80 mm - complete stop system Chsdpfsu Inu Rsx Admsf

Sąlyga: naudotas, Gamybos metai: 1995, Funkcionalumas: visiškai funkcionalus, The extraction system offered here is being sold complete with piping and six shut-off gates. A detailed list of the pipes is available upon request. The extraction unit features four collection containers, electric shaker cleaning, and a separate control cabinet. Sale is for self-collection only. Chjdpfx Adowyp Rxjmef

Sąlyga: naudotas, Gamybos metai: 2013, veikimo valandos: 4 131 h, Įranga: visų varančiųjų ratų pavara,

Sąlyga: naudotas, Gamybos metai: 1984, Used machine Year of manufacture: 1984 Chsdekwg Rcopfx Admef Universal dowel drilling machine with swiveling drilling unit with fully automatic control with 2 safety pneumatic clamps Drill gearbox motor 2.2 kW with 21 spindles Spindle pitch 32 mm with integrated oil damping Height adjustment 80 mm Drilling depth 80 mm Weight 420 kg Availability: short-term Location: Flörsheim

Sąlyga: naudotas, Gamybos metai: 1984, Used machine Year of manufacture: 1984 Condition: fully inspected and serviced Features and technical specifications: - Incl. combination unit with contact roller and sanding pad - With height-adjustable contact roller for calibration Chedpfx Aew R Hh Uodmef - With workpiece-controlled air cushion pressure shoe - 4-way adjustable grit compensation - With pneumatic belt tensioning device - With rotating structuring brush at the machine outfeed - Sanding width: 1350 mm - Sanding belt length: 1900 mm - Pass-through height: 150 mm - Main motor: 15 kW - Variable feed speed, continuously adjustable: 2.5 – 12.5 m/min - With roller table at machine infeed - With separate additional structuring brush - With roller table at machine outfeed - With digital display unit for the electronically driven workpiece thickness adjustment - With automatic workpiece thickness adjustment - Extraction nozzles: 2 x 200 mm - Feed belt is OK; has a defect in one spot (see photo) Dimensions: approx. 2300 x 2000 x 2300 mm Weight approx.: 2500 kg Photos show the machine in uninspected condition! Location: Flörsheim Availability: approx. 4-6 weeks after order confirmation

Gamybos metai: 1983, Sąlyga: naudotas, mašinos/transporto priemonės numeris: 508323, 21-spindle, 32 mm pitch Tool holder M 10 external thread Maximum spindle distance: 640 mm Maximum portal opening: 1056 mm Stop length: 2500 mm with 4 swiveling stops Cjdpfx Adodardxsmehf Drilling unit with 2.2 kW motor Drill head swiveling, drilling from below Height adjustment max. 80 mm Max. drilling depth: 80 mm Available from location Seevetal, as inspected Subject to prior sale