Perforatorius

Schüco Pneumatik-Presse 293 885

Sąlyga: naudotas, Gamybos metai: 2015, mašinos/transporto priemonės numeris: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. forward speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Tedefxyhfepfx Ag Ref Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table opening: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom built for you. Production time is approximately 5 months from receipt of payment. Forward stroke: The press moves to the zero position at up to 90 mm/sec. Positioning accuracy is 0.5 mm or better. Return stroke: The press returns to the end position at up to 90 mm/sec. Accuracy is also 0.5 mm or better. Holding time can be set from 0 to 10 seconds (in 0.1 second increments). Pressing force is adjustable from 10 to 40 tons in bar. Additional control details: The control unit can be locked via a key switch. The key switch provides the following functions: Manual operation with two-hand control at 9.5 mm/sec in setup mode. (Stop in any desired position by releasing the switches.) Manual operation for bending tasks at up to 9.5 mm/sec using two-hand operation and automatic return to the top dead center when the two-hand buttons are released. Automatic operation with safe tools at up to 200 mm/sec. This function is equipped with a warning label on the control panel. In automatic mode, the machine is strictly suitable for the use of fully enclosed, safe tools only. This information is prominently displayed on the front of the machine. In manual setup mode, the machine can also be operated with two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A rotary key switch enables switching between automatic and manual mode. Position adjustment for top dead center (OT) and bottom dead center (UT) and the switching position for speed reduction are performed via sensors adjustable along a chrome-plated rod. The sensor can be finely adjusted via a clamping thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and can bend sheet metal via two-hand operation, but it can also punch, notch, and bend in automatic mode with appropriate safety tooling.

Gamybos metai: 2004, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: 0441057, Offer 23300 Technical Specifications: - Belt dimensions: 75 x 2000 mm - Surface grinding opening: 75 x 300 mm - Support vice – angle adjustable: 90° to 30° Tjdepug D Eopfx Ag Rof - Belt speed: 15 + 30 m/sec - Possible contact wheel diameters: Ø 20 – 76 mm - Contact wheel length: 75 mm - Drive: 400 V / 2.2 / 3 kW - Drive speeds: 1440 / 2880 rpm - 1 piece contact wheel: 48 mm - Required space approx.: W 800 x H approx. 1000 x D 1300 mm - Weight approx.: 250 kg

Sąlyga: geras (naudotas), Gluing machine Schmedt Präcoll, in good condition, immediately available. Tjdpfxoh H Iu Ns Ag Rsf If you are interested, we are happy to provide information about additional machines available in our facility. You are welcome to inspect the machine at our premises by prior appointment.

Sąlyga: geras (naudotas), Gamybos metai: 1969, Pneumatic gluing press, max. pressure 10 bar, gluing beam with heating, Todsd Dxqbspfx Ag Ref gluing area 550 x 40 mm infinitely variable temperature setting for upper and lower gluing beams from 0 - 300°C, infinitely variable setting of the gluing dwell time, drive power: 5 kW, 380 Volt-50 Hz, two-hand operation by SIEMENS. Pressure build-up via toggle lever, max. opening stroke approx. 30 mm

Sąlyga: geras (naudotas), Gamybos metai: 1995, Offer 24315 Technical Data: - Sanding belt dimensions: 2000 x 100 mm - Surface grinding opening: 400 x 100 mm - Support vice – angle adjustable: 90° to 30° - Fine adjustment of support via handwheels Tjdpfx Ajt Stfhog Rof - Sanding belt speed: 30 m/sec - Contact wheel / sanding roller: Ø 42 mm - Drive: 400 V / 2880 rpm / 3 kW - Required space (approx.): W 700 x H 1200 x D 1200 mm - Weight (approx.): 225 kg - 10 contact sanding rollers, approx. diameters: Ø 10 + 18 + 22 + 24 mm Ø 28 + 33 + 36 + 48 + 60 + 68 mm

Sąlyga: naudotas, Plasma cutting unit, plasma cutter - Features: without torch hose package - Cooling: water-cooled - Maximum cutting current: 70 A - Mains voltage: 3x400V Tjdpfsb A Innox Ag Ref

Sąlyga: naudotas, Thread cutting machine with steel jaws, threading head - Chuck diameter: 190 mm - Size: 1/2 - 2 inch Tjdpfjb A Ncuex Ag Rsf - Weight: 130 kg

Sąlyga: naudotas, Glaser flat steel bender HAWE HC4L/3.0 hydraulic, see pictures Tedpfx Asu Da Afog Rof

Sąlyga: naujas, Saw blade diameter 350 mm Cutting capacity at 90 degrees: round 100 mm Cutting capacity at 90 degrees: square 100 mm Cutting capacity at 90 degrees: flat 100 x 195 mm Cutting capacity at 45 degrees: round 100 mm Cutting capacity at 45 degrees: square 100 mm Cutting capacity at 45 degrees: rectangle 100 x 135 mm Saw blade speed 2,800 rpm Total power requirement 1.5 kW Machine weight approx. 250 kg Dimensions (L x W x H) 0.7 x 0.7 x 1.4 m NOTE: PROMOTIONAL PRICE - Mitre cuts left/right 45° - Fixed indexing stops at key mitre angles - Pneumatic double clamping device Todpfx Asupxaxog Rsf - Safety motor brake - Complete with mist spray system and machine base

Gamybos metai: 1990, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: 22177, Article number: MA1154 Manufacturer: Mep Model: Cobra 350 MA Year of manufacture: 1990 Machine number: 22177 Length [mm]: 1100 Width [mm]: 1000 Height [mm]: 1800 Weight [kg]: 350 Connected load: 380 V Saw blade diameter: 350 mm Tjdpfx Agoirud Do Rjf Equipment: Mitre cutting 45 degrees