Aliuminio diskinis pjūklas

BERG & SCHMID Alujet 351

Sąlyga: naujas, Gamybos metai: 2025, mašinos/transporto priemonės numeris: SÇ 431 Alüminyum Pvc Manuel Üstten Kesim Makinesi, • Complies with CE standards. • The machine can cut at +45, -45 and intermediate angles. • Quick-stop bumpers for 90, 75, 60, and 45 degrees. • Table locking lever for intermediate angles. • Profile clamping is pneumatic and performed efficiently. • Diamond saw blade diameter is Ø400 mm. • Equipped as standard with measuring and transport conveyors (2.5 meters each on right and left). Lrsdpjramzusfx Aaajw OPTIONAL • Cooling unit for cutting aluminum profiles • Roller conveyor system (3 meters each on right and left)

Sąlyga: naudotas, Gamybos metai: 2000, Technical details: Drilling capacity in steel (diameter): 18 mm Throat depth: 250 mm Drilling stroke: 100 mm Drilling capacity in cast iron: Ø 23 mm Lredpju R Uncofx Aaasw Max. distance spindle/table: 75 / 400 mm Speed range: 225 - 4,300 rpm / 2x 8 steps Spindle taper: MT 2 Feed: manual feed mm/rev Table clamping surface: 250 x 250 mm Vertical adjustment: 325 mm Table size (L x W): 250 x 250 mm Table rotation: 360° Base plate clamping surface: 320 x 250 mm Distance spindle center to base plate: 565 mm Column diameter: 90 mm Total power requirement: 0.55 kW Machine weight approx.: 160 kg Dimensions (L x W x H): 0.9 x 0.6 x 1.1 m High-performance drilling machine Thread cutting in steel up to M10 and in cast iron up to M14 possible Equipped with Röhm quick-action chuck 3 - 16 mm Operation via control panel / foot switch

Sąlyga: naujas,

Sąlyga: naudotas, Gamybos metai: 1986, Sheet thickness: 6.0 mm Pressure: 18 t Shearing angle – upper blade: 90° Blade length: 225 x 225 mm Ljdpfx Aog Ip Efjaasrw Operating voltage: 380 V Total power requirement: 5.5 kW Machine weight: approx. 650 kg Space requirement: approx. 1.10 x 0.80 x 1.05 m - Adjustable angle stops

Sąlyga: naujas, Gamybos metai: 2025, mašinos/transporto priemonės numeris: SÇ 1000 DİJİTAL METRE, • 3 meters length Lodpfx Aaerblaloasrw • +/- 0.1 mm measurement accuracy • 220 Volt voltage • Touchscreen display • Back gauge retraction feature with a single button for easy removal of the cut product from the die • User-friendly design for ease of operation • Easy calibration

Sąlyga: labai geros būklės (naudotas), Glaser automatic scroll bending machine GSB 6 with bending tools Lsdpou Ezx Rsfx Aaasrw

Sąlyga: naujas, Saw blade diameter: 315/350 mm Cutting range at 90 degrees, round: 125 mm Cutting range at 90 degrees, square: 110 mm Cutting range at 90 degrees, flat: 160x90 mm Cutting range at 45 degrees, round: 105 mm Cutting range at 45 degrees, square: 90 mm Cutting range at 60 degrees, flat: 80x100 mm Total connected load: 1.8/2.5 kW Machine weight: approx. 0.2 t Space requirement: approx. 0.6 x 1.22 x 1.06 m The large workshop saw with advanced technology. (20070) • For mitre cuts to the right and left up to 45°, end stop at 90° and 45° left • Suitable for cutting steel, stainless steel, and, to a certain extent, aluminium profiles • Vice with quick-release lever, longitudinally adjustable clamping jaw, adjustable guide, and double clamping arm for burr-free cuts • Taper safety clutch made of hardened steel to protect the saw blades • Large, solid cast baseplate for maximum stability and low-vibration cutting • 2 speeds: 30 + 60 rpm • High-performance special gearbox with flexible coupling for heavy-duty applications • Automatic cooling directly onto the saw blade • Saw head with double bearing • 24 V safety switch in the handle with restart protection • Length stop, assembly tools Lredpfx Aaod Iin Tjajw NOTICE: Price is without saw blade!!!

Sąlyga: naudotas, Gamybos metai: 2015, mašinos/transporto priemonės numeris: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. forward speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table opening: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom built for you. Production time is approximately 5 months from receipt of payment. Forward stroke: The press moves to the zero position at up to 90 mm/sec. Positioning accuracy is 0.5 mm or better. Return stroke: The press returns to the end position at up to 90 mm/sec. Accuracy is also 0.5 mm or better. Holding time can be set from 0 to 10 seconds (in 0.1 second increments). Pressing force is adjustable from 10 to 40 tons in bar. Additional control details: The control unit can be locked via a key switch. The key switch provides the following functions: Manual operation with two-hand control at 9.5 mm/sec in setup mode. (Stop in any desired position by releasing the switches.) Manual operation for bending tasks at up to 9.5 mm/sec using two-hand operation and automatic return to the top dead center when the two-hand buttons are released. Automatic operation with safe tools at up to 200 mm/sec. This function is equipped with a warning label on the control panel. In automatic mode, the machine is strictly suitable for the use of fully enclosed, safe tools only. This information is prominently displayed on the front of the machine. In manual setup mode, the machine can also be operated with two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A rotary key switch enables switching between automatic and manual mode. Position adjustment for top dead center (OT) and bottom dead center (UT) and the switching position for speed reduction are performed via sensors adjustable along a chrome-plated rod. The sensor can be finely adjusted via a clamping thread – accuracy +/- 0.5 mm. Lrsdpfx Ajfxyhfsaaew The press can be equipped with a bending blade and can bend sheet metal via two-hand operation, but it can also punch, notch, and bend in automatic mode with appropriate safety tooling.

Gamybos metai: 2006, Sąlyga: paruoštas naudoti (naudotas), Inclination: 7°, compressed air connection: 6.5 bar, connected load: 8.5 kW, length: 4,170 mm, width: 2,990 mm, height: 3,330 mm, weight: 2.8 t, including documentation. Lsdpfx Asibiivoaasrw

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2006, lazerio galia: 4 000 W, IMMEDIATELY AVAILABLE: TRUMPF Trumatic L 3030 – 4 kW – Year 2006 TECHNICAL DATA: Manufacturer: TRUMPF Model: L 3030 – 4 kW Year of manufacture: 2006 Working area: 3,000 x 1,500 x 115 mm CNC Control: Siemens Sinumerik 840 D Laser power: 4,000 watts Max. sheet thickness mild steel: 20 mm Max. sheet thickness stainless steel: 15 mm Max. sheet thickness aluminum: 10 mm Operating hours: NC Ljdpfxjuthz Ts Aaasrw Machine regularly serviced by TRUMPF! Transmitting tube: new in 2024 TASC laser control: new in 2022 Driver stage: replaced in 2018 Magnetic bearing electronics: new in 2016 STANDARD EQUIPMENT: - Enclosed machine frame with integrated laser unit Laser unit: CO2 laser TLF 2000, high-frequency excited, maintenance-free turbo radial blower, mirror telescope, cooling unit, logbook function - Automatic pallet changer - Longitudinal conveyor belt for small parts/waste - Drives: maintenance-free three-phase servo motors - Quick-change cutting head system - Laser cutting head with 5" lens and laser cutting head with 7.5" lens - Programmable cutting gas pressure setting - APC capacitive height control and process control - Automatic focus position setting AutoLas Plus - Laser power control - Position laser diode - HI-LAS high-pressure cutting - Fast processing with SprintLas - ContourLas for making small holes - PMS plasma sensor technology - Automatic sheet metal edge detection - Programmable power cycles - Microweld - Automatic shut-off - Work area lighting - Sinumerik 840D control: open PC-based control, easy operation, online help, integrated e-Shop, diagnostic functions, maintenance logbook, technology data, teleservice - Workshop programming ToPs 100 lite - Safety: multi-beam light curtains, fully encapsulated and ventilated beam guidance, monitoring system, multi-chamber extraction and compact dust extractor, protective cabin - 3.5" floppy disk drive - TFT color monitor - Electrical equipment: Voltage 400 V / 50 Hz - Paintwork: Standard RAL 9002/5010 ADDITIONAL EQUIPMENT: - Laser TLF 4000 incl. lens monitoring sensor - PCS Process Control System