Flotacijos įrenginys / automatinė padengimo mašina

SARMAX APACHE 3

Gamybos metai: 2011, Sąlyga: labai geros būklės (naudotas), This is a complete plant for house construction. Prices for each item are listed individually. Iedpfx Afeu D Amgo Ijht Comprising the following elements (see attached document): Images will follow and are already included in the attached document. Table 1 (Positioning and clamping the stud frame) €34,500 • Adjustable longitudinal conveyor with 3 hinged belt conveyors and sheathing • Pneumatic cross-clamping • Connections for compressed air and electricity Table 2 (Placing and fastening the first sheathing layer) €25,300 • Longitudinal conveyor with 3 hinged belt conveyors and sheathing • Pneumatic cross-clamping • Connections for compressed air and electricity Intermediate conveyor, 3 m length (parking bay for multifunction bridge) €4,600 • Longitudinal conveyor with 3 hinged belt conveyors Table 3 (Placing the second sheathing layer, fastening, and flipping the element onto the next table) €35,650 • Longitudinal conveyor with 3 hinged belt conveyors and sheathing • Pneumatic cross-clamping • Connections for compressed air and electricity • Hydraulic turning device Table 4 (Installation of electrical systems and insulation) €34,500 • Cross transfer with rollers and sheathing • Table cross-travel function • Connections for compressed air and electricity • Hydraulic turning device Table 5 (Placing the first sheathing layer and fastening the second side) €32,775 • Longitudinal conveyor with 3 hinged belt conveyors • Cross transfer with rollers • Pneumatic cross-clamping • Connections for compressed air and electricity Intermediate conveyor, 3 m length (parking bay for multifunction bridge) €4,600 • Longitudinal conveyor with 3 hinged belt conveyors Table 6 (Placing and fastening the second sheathing layer) €28,750 • Longitudinal conveyor with 3 hinged belt conveyors • Pneumatic cross-clamping • Connections for compressed air and electricity Table 7 (Erection and distribution table) €29,900 • Longitudinal conveyor with 3 hinged belt conveyors • Hydraulic tilting unit • Table cross-travel unit • Overhead guide for holding the walls vertically Manual surface gantry with vacuum lifter on Table 2 (placing the first sheathing layer) €13,800 • Load capacity 85 kg with Schmalz vacuum unit • Steel base frame with low-friction rails • Travel range 12 x 5 m Manual surface gantry with vacuum lifter on Table 3 (placing the second sheathing layer) €13,800 • Load capacity 85 kg with Schmalz vacuum unit • Steel base frame with low-friction rails • Travel range 12 x 5 m Manual surface gantry with vacuum lifter on Table 5 (placing the first sheathing layer on the second side) €13,800 • Load capacity 85 kg with Schmalz vacuum unit • Steel base frame with low-friction rails • Travel range 12 x 5 m Manual surface gantry with vacuum lifter on Table 6 (placing the second sheathing layer on the second side) €13,800 • Load capacity 85 kg with Schmalz vacuum unit • Steel base frame with low-friction rails • Travel range 12 x 5 m Wall storage 1: 12 m long, 24 bays €11,500 Wall storage 2: 12 m long, 20 bays Vacuum lifter with column-mounted slewing crane €9,200 1 traverse, 2 t Abus €20,125 1 traverse, 2 t

Sąlyga: labai geros būklės (naudotas), Rąstų žievinimo įrenginys VK450 2RE. Įrengtas dviem rotoriais. Vienas yra kelmo frezos rotorius. Kitas – žievės šalinimo rotorius. Min-max rąsto diametras 8–45 cm. Minimali rąsto ilgis 3 m. Komplekte su originaliu VK centrinančiu konvejeriu. Bus parduodamas po kapitalinio remonto. Iedpfx Afoulv Hzo Isht

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Vertical double-sided wood press by C.O.P.E. Two working areas, each measuring 620x110 cm. Ihsdpsudy A Nefx Af Iet

Gamybos metai: 2000, Sąlyga: geras (naudotas), EWD Combimes apkantavimo linija. Pagaminimo metai 2000, tipas DK90-TL. Medžio padavimas iš kairės. Didžiausias apkantavimo plotis 500 mm, didžiausias storis 120 mm. 90 kW variklis. Takto dažnis su 4,0 m ilgio medžiu apie 18 vnt./min. Komplektuota su originalia EWD valdymo sistema. Pristatymas nuo kaupiklio konvejerio prieš atskyrimą iki skutelių separatoriaus įskaičiuotas. Įrenginys pilnas, geros būklės. Ihodpfjxcwvxex Af Ijt

Sąlyga: naudotas, Gamybos metai: 2001, Wood dimensions to be processed: Incoming lengths min/max: 500 – 6500 mm; Full optimization up to max. 1500 mm. Incoming widths min/max: 40 – 300 mm. Incoming thicknesses min/max: 15 – 120 mm. Maximum wood cross-sections: 300 x 40 mm, max. 200 x 120 mm. Fixed lengths after saw: min. 510 – 2800 mm. Special application: Cutting of blocks, length min/max: 100 – 200 mm (Note: multiple block length during sorting, blocks are transported to the end of the sorting line and drop into customer-side mesh boxes). Cut/trimming tolerance: +/- 0.8 – 1.5 mm (for wood with minimum resin content and even surface. Tolerance up to 1 m fixed length, max. tolerance for longer parts up to 2.5 m). Thickness tolerance: +/- 3 mm. Curvature of wood in all directions: max. 10 mm per meter length. Types of wood: Softwood or hardwood. Machine performance: Feed speed continuously adjustable up to max. 230 m/min; cutting cycle 0.6 – 1 s. To determine the practical daily output, an effectiveness factor dependent on the customer’s production conditions must be considered. Infeed and saw working height: 900 mm (install required on customer-side platform, saw requires concrete base). Sorting working height: 2000 mm. Connection values: Total electrical connection load approx. 18 kW. Operating voltage: 380 Volt / 50 Hz. Voltage fluctuations max. 5 %. Air consumption approx. 1200 NL/min. Operating pressure approx. 8 bar. Extraction velocity approx. 30 m/s. Paint finish: pebble grey RAL 7032 and blue NCS 5030-R 80 B. POSITION OVERVIEW: Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge. Pos. 2: Support roller without drive, at the end before steel table for easier feeding. Pos. 3: Length measuring station with built-in fluorescence camera for detecting defect markings. Pos. 4: Automatic non-contact width measurement. Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version with built-in waste chute incl. equipment package for large wood cross-sections. Graphic-capable input terminal (16 x 40 characters, numeric keypad) with software package for optimization and plant control. The following are available for processing: - max. 16 product groups - max. 8 qualities per product group - max. 200 fixed lengths per product group. Pos. 6: Discharge conveyor belt as sorting station with drive unit, length 7500 mm. Pos. 7: 2 ejectors mounted on discharge conveyor belt. Location: Nattheim Ihedpfxsw Sy T Hs Af Iet

Gamybos metai: 2021, Sąlyga: labai geros būklės (naudotas),

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 200 t, stalo plotis: 300 mm, pjovimo aukštis su įrėžėju (maks.): 100 mm, frezos veleno ilgis: 250 mm, Equipment: Ihsdpfx Afswz H Ano Ijt - 1 GRECON feeding transfer system with accumulation for 4 to 5 purged boards of varying lengths for finger-jointing - 1 GRECON double finger-jointer for deep joints (for glulam beam production) - 1 180° transfer with two-component glue application - 1 GRECON finger-jointing press - 1 cross-cut saw with CNC control - 1 outfeed table

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, padavimo ilgis X ašis: 13 000 mm, padavimo eiga Y ašimi: 240 mm, padavimo ilgis Z ašis: 100 mm, X ašies padavimo greitis: 25 m/min, spaudimo jėga: 40 t, įėjimo įtampa: 400 V, bendras aukštis: 1 120 mm, darbinio aukščio: 1 120 mm, frezos veleno ilgis: 330 mm, valdymo įtampa: 400 V, ruošinio aukštis (maks.): 100 mm, įrankio skersmuo: 240 mm, sukimosi greitis (maks.): 6 000 aps./min, oro slėgis: 7 juosta, obtotalinė obliavimo stalų ilgis: 13 000 mm, Turime pasiūlyti pilnai automatizuotą konstrukcinės medienos KVH gamybos liniją. Ji turi visus CE sertifikatus ir Poznanės Medžio Technologijos Instituto sertifikatą. Atitinka ENPN 14.081 ir 14.081 standartus. 1. Įstrižinis iškrovimo transporteris 2. Pakrovimo stalas vizualinei medienos klasifikacijai 3. Buferis prieš defektų pjovimo įrenginį Iodpfx Afexfzyyj Isht 4. Automatinis defektų išpjovėjas su fluorescencinės kreidos kamera 5. Buferis prieš dygiuotės mašiną 6. Dygiuotės mašina su klijų užteptuvu ir pjūklu pjauti iki 13 m ilgio ruošinius 7. Grandininis sandėliavimo transporterinis konvejeris nuo klijavimo mašinos iki keturpusės obliavimo staklės 8. Automatinis padavėjas keturpusei obliavimo staklei 9. Keturpusė obliavimo staklė Winter 6-33 10. Volelinis atsiėmėjas nuo keturpusės obliavimo staklės 11. Automatinis obliuotos medienos pakavimo įrenginys 12. Grandininis padavėjas 13. Klijuotų ruošinių stiprumo matuoklis

Sąlyga: labai geros būklės (naudotas), veikimo valandos: 10 h, Funkcionalumas: visiškai funkcionalus, Automatic Finger Jointing Line Grecon Dimter Ultra Machine after comprehensive overhaul. Specification: Tenoner: Saw Spindle: - Spindle speed: 3,000 rpm - Saw motor power: 6 kW - Chip extraction: Ø100 mm Milling Spindle: - Arbor diameter: Ø50 mm - Usable arbor length: 210 mm - Max. tool diameter: Ø250 mm–Ø150 mm - Spindle speed: 6,000 rpm - Milling motor: 15 kW / 3,000 rpm - Chip extraction: Ø150 mm Feed Table: - Minimum board length: 150 mm - Maximum board length: 700 mm - Working feed: Infinitely adjustable Dust Extraction: Chipper extraction duct diameter: Ø100 mm Milling head extraction duct diameter: Ø150 mm Dust extraction capacity (flow rate): ~2,400 m³/h Ihjdpsuddvaefx Af Ijt Pneumatic System: Operating pressure: 6 bar Air consumption: ~2.5 m³/h at 6 bar (15 Nm³/h) Longitudinal Finger Jointing Press CONTI M 6/6000: Press: - Loaded strip width: 25 – 160 mm - Finished strip length: approx. 6,000 +15-50 mm - Pressing force: 3 – 7.5 T (3,000 – 7,500 daN) Circular Saw: - Saw blade diameter: Ø400 mm - Spindle diameter: Ø30 mm - Motor: 4 kW / 3,000 rpm Extraction: - Saw extraction duct diameter: Ø100 mm - Extraction capacity (flow): ~400 m³/h Pneumatic System: - Operating pressure: 6 bar - Air consumption: ~2.5 m³/h at 6 bar (15 Nm³/h) Scope of Overhaul Works: 1. Cleaning machine bodies and application of new paint 2. Replacement of bearings with new ones: main spindle of the tenoner; saw unit spindle of the press; linear bearings on the carriage table guide of the tenoner; bearings on the working conveyor belts. 3. Installation of a new glue nozzle with 3.8 mm spacing on the tenoner body, assembly of a glue tank with a safety valve. 4. New conveyor belts 5. Replacement of wiring on machine bodies 6. Replacement of pneumatic tubes for actuators, solenoid valves and other pneumatic components 7. Replacement of gears and duplex chain on the press’s chain/belt feeder 8. Overhaul of electromagnetic brakes on the tenoner 9. Replacement of seals and O-rings (repair kits) in pneumatic actuators; replacement of worn solenoid valves with new ones 10. Replacement of graphic operator panels on the tenoner control cabinet, on the press control cabinet, and on the small press panel 11. Replacement of buttons, indicator lights, and switches on operator panels and control boxes; replacement of terminal boxes 12. Replacement of controllers overseeing the operation of the tenoner and press with new ones and adaptation of the machine’s control program to user requirements 13. Installation of new frequency inverters on the press rollers and on the push bar of the outfeed table 14. Servicing of electrical installations in control cabinets, modernization and preparation of updated wiring diagram 15. Installation of guards, meshes, and necessary descriptions, labels, safety signs, manufacturer logo, and nameplates 16. Replacement of V-belts with new ones, inspection of pulleys, geared motors, and electric motors 17. Replacement of limit switches, inductive and optical sensors (photo sensors) We specialize in finger jointing machines. Installation, commissioning and operator training within Poland included in price; in other countries, for an additional fee. Service and spare parts support provided.

Sąlyga: naudotas, rida: 371 140 km, galia: 309 kW (420,12 AG), pirmoji registracija: 12/2012, kuro tipas: dyzelinas, tuščias svoris: 10 170 kg, didžiausias leistinas svoris: 15 830 kg, bendras svoris: 26 000 kg, padangos dydis: 315/80 R22,5, kuras: dyzelinas, stabdžiai: intarder, spalva: geltonas, vairuotojo kabina: kitas, pavaros tipas: automatinis, emisijos klasė: nėra, pakaba: kitas, sėdimų vietų skaičius: 2, bendras ilgis: 9 600 mm, Gamybos metai: 2012, statybinis aukštis: 4 000 mm, lovų skaičius: 1, Įranga: ABS, borto kompiuteris, oro kondicionavimas, priekabos jungtis, trauki kontrolė,