Hydraulic guillotine shear

SAFAN VS 2500 x 0,5 - 8,0 mm

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 341883, TECHNICAL SPECIFICATIONS Capabilities: Maximum turning diameter: 270 mm Maximum diameter over cross slide: 160 mm Center height over cross slide: 83 mm Maximum diameter over bed: 430 mm Turning length (depending on equipment): 630 mm Headstocks: Standardized spindle nose, enabling use of various collets and chucks with appropriate adapters. Collet accessories SCHAUBLIN: B45/F66 Maximum bar capacity, diameter: 36 mm/60 mm Standard power chuck, diameter: 210 mm Direct drive by AC motor, power at 100% / 50% duty cycle: 15 / 18.5 kW Maximum torque at 100% / 50% duty cycle: 135 / 165 Nm Maximum spindle speed: 4000 rpm Spindle positioning increment: 0.1° C Axis: Programmable increment: 0.001° Spindle locking torque: 80 Nm Pneumatic clamping cylinder: 3400 daN Cross Slide: Transverse travel, X axis: 230 mm Radial resolution: 0.0005 mm Driven by AC motor, nominal torque: 3 Nm Ball screw, dia. x pitch: 32 x 5 mm Longitudinal travel, Z axis: 720 mm Resolution: 0.001 mm Driven by AC motor, nominal torque: 6 Nm Ball screw, dia. x pitch: 32 x 10 mm Feeds: Working feed, X/Z axes stepless: 0–5000 mm/min Rapid traverse, X/Z axes: 8/10 m/min Feed force, X/Z axes: 420/670 daN Turret Tool System: Number of tool stations: 12 Number of driven tool stations: 6 Driven by AC motor, intermittent power: 3.7 kW Max. intermittent torque: 36 Nm Max. drive speed: 5000 rpm Standardized toolholder mounting: VDI 30 Maximum turning tool section: 20 x 20 mm Integrated coolant Indexing in both directions Coolant: Tank capacity: 120 liters Pump flow rate: 10 l/min Pressure: 5 bar Inventory 2230043 includes: 1 Fanuc 18i control 1 A2-6 spindle headstock 1 12-position VDI 30 turret for 6 driven tools 1 pneumatically-operated tailstock support 180-65.200 1 SCHUNK Rota-s 200-52 A2-6'' 3-jaw chuck 1 Brucker CM5 live revolving center 1 ESX-25 radial drilling-milling head, max speed 5000 rpm, without EX nut, ref 4100.00552 1 ESX-25 axial drilling-milling head, max speed 5000 rpm, without EX nut, ref 4100.00550 1 KENNAMETAL ESX-25, without EX nut 1 EWS ESX-25, without EX nut 4 short left radial toolholders, type B2, ref 4100.0100 1 ESX-25 collet holder, type E3, with EX25 nut and 5 mm collet 1 similar, without EX25 nut Bsdpfx Aljzb U Eps Asww 3 tapping collets, Ø 4.5, 6, and 8 mm 1 toolholder for indexable insert drills, Ø 40 mm bore, type E1, ref 4100.00124 1 similar, Ø 32 mm bore, ref 4100.00107 1 similar, Ø 20 mm bore, ref 4100.00105 1 boring bar holder, Ø 8 mm, type E2, ref 4100.00108 1 similar, Ø 10, ref 4100.0109 1 similar, Ø 12, ref 4100.0110 2 similar, Ø 16, ref 4100.0111 1 similar, Ø 20, ref 4100.0112 1 similar, Ø 25, ref 4100.0113 1 similar, Ø 32, ref 4100.0115 1 similar, Ø 32 GARANT, long 5 steel protective plugs, type Z2, ref 4100.00130 1 axial left toolholder, C4 force, ref 4100.00103 1 pneumatically-operated support tailstock CM 5, ref 180-65.200 1 stand for microscope only, ref 180-60.005 1 coolant system OPTION 1 hinged steady rest with 3 fingers for Ø 30 – 120 mm, ref 180-70.200, CHF 2,500.– + VAT All technical information provided without liability for errors or omissions.

Būklė: dilaminuotas dirbtuvėje (naudotas), BSTA 110H su BBV 202/120 padavimu. Mechaninis kapitalinis remontas. Galimas CE pertvarkymas. Susisiekite dėl pasiūlymo. Archyvinė nuotrauka. Bwsdpfjizi Hmsx Al Ajw

Būklė: naudotas, CNC Centerless Grinding Machine ESTARTA 310 Bjdpfx Asq Ehqfjl Asww

Būklė: naujas, Working length: 2451 mm Working width: 2170 mm Working height: 800–1000 mm Haberkorn return conveyor approx. 2,451 mm x 2,170 mm ----- Base Frame - Steel tube frame 50 x 50 x 2 mm - Height-adjustable support stands (approx. 800 mm–1000 mm) - Conveyor system for timber lengths from 300 mm to 4,200 mm - Conveyor system for timber widths up to 240 mm Roller Conveyor – Infeed - Continuously driven roller conveyor, approx. 5–25 m/min - Drive via 0.37 kW geared motor, drive shaft and PU round belt - Roller diameter 50 mm, roller cover length 240 mm with PVC coating - Transfer to cross conveyor by raising/lowering the roller conveyor - Roller covers in accordance with HBG Cross Conveyor - Cross conveyor with 6 traverses - PVC-coated conveyor belts (green), 50 mm wide, guided in plastic channels - Continuously driven cross conveyor approx. 5–20 m/min - Drive via 0.37 kW geared motor - Approx. 1,750 mm from stop to stop Roller Conveyor – Outfeed - Continuously driven roller conveyor, approx. 5–25 m/min - Drive via 0.37 kW geared motor, drive shaft and PU round belt - Roller diameter 50 mm, roller cover length 240 mm with PVC coating - Transfer to cross conveyor by raising/lowering the roller conveyor - Roller covers in accordance with HBG ----- Belt Conveyor approx. 320 mm x 3,500 mm Base Frame - Steel tube frame 50 x 50 x 2 mm - Height-adjustable support stands (approx. 800 mm–1000 mm) - Belt conveyor for timber lengths from 300 mm to 4,200 mm - Belt conveyor for timber widths up to 240 mm - Belt conveyor on castors with brakes Belt - Continuously driven, approx. 5–25 m/min - Drive via 0.37 kW geared motor - Belt, PVC-coated, 260 mm wide - Adjustable stops approx. 15 mm on each side Bsdpsi Hmpisfx Al Ajww ----- Control System: - Plug-and-play with its own control system and logic - Siemens PLC, 24 V DC - Siemens frequency inverter - Optical limit switches and emergency stop loop - Fully installed with 16A European plug - Connection: 400V AC, 2 kW, 50 Hz ----- Pneumatics: 6–8 bar, consumption approx. 16 NL/min Colour: RAL 7035 light grey Complies with basic EU directive 2006/42/EC in accordance with 2006/95/EC Electrical Equipment (Low Voltage Directive) and 2004/108/EC EMC Directive ----- Price for the above-mentioned specification ex works: on request! plus packaging and transport costs ----- (Technical information according to manufacturer. Subject to change and without guarantee!)

Būklė: naujas, ⭐⭐⭐⭐⭐ (5.0) 42 reviews ✈️ Shipping available: 45-day delivery ✈️ ✅✅✅Energy Class A+++✅✅✅ ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Excellent Support! ⭐€10,850 PLUS VAT & SHIPPING⭐ Bedpfx Aoc Uthdel Ajww ►►Buy-Now◄◄ ✳️Maintain your liquidity! We offer a wide variety of financing options to ensure your investment has the best chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs. ✳️ ➖➖➖➖➖ ►►►⌛⏰ FASTEST Delivery Time❗⌛⏰►►► ✨✨Buy directly from the manufacturer and benefit from our price and quality advantage!✨✨ Benefit from Proton’s 40 years of experience in surface coating technologies. ➖➖➖➖➖ ☘️Environmentally Friendly☘️⚡️Green Energy⚡️☘️ ⭐ Spray Booth – WETLINE-SP-1500 ✔️ Internal dimensions: 1390 mm L * 1500 mm W * 1400 mm H ✔️Pool height: 561 [mm] ✔️Filtration system: Double-layer water curtain ✔️Filter media: mains water, panel filter, and mechanical separator with backwash ✔️Filter media cleaning: fine and coarse grating ✔️Pump capacity: 1.5 [kW/h] 940 [rpm] x 1 unit ✔️Number of fans: 1 unit ✔️Fan capacity: 5,400 m3/h x 1 ✔️Fan motor power: 3 kW/h ⭐Booths can be manufactured from galvanized sheet or stainless steel. They can be designed for integration into both automatic and manual systems. ⭐A platform is installed at the pool for material and personnel safety, covering the entire pool area. ⭐In the Wetline spray booth, environmental pollution is prevented by the simultaneous application of three different filtration systems. ⭐Wet paint particles extracted from the air by a suction fan are captured by the water curtain at the rear of the booth and transferred to the pool. ⭐Trace amounts of wet paint particles not captured by the water curtain are collected by the separators located at the suction channels behind the water curtain, with fresh air discharged through the exhaust. ⭐A backwash system is applied in the separator section to enhance the retention of moist paint particles. The filtration efficiency, increased by spraying wash water through nozzles onto the contact surface, is maximized. ⭐Paint-contaminated wastewater accumulating in the basin passes through both coarse and fine grates as it enters the pump suction chamber, preventing clogging of the pump nozzles and ensuring effective retention of paint particles. ⭐When the wastewater in the pool becomes unusable, it can be drained by using the wastewater valve located behind the grates in the suction section. ⭐By implementing a paint separator system, the water in the basin is cleaned of paint and continually reused. ⭐Separated paint residues are dewatered by using a filter press and must be disposed of properly. ⭐The listed price refers to the smallest standard size in stainless steel. All equipment/machines are new, not used. Looking for a special configuration❗ Call us now❗ ☀️ 2-YEAR WARRANTY ☀️ ☀️We have CE certificates for all our machines and ATEX certificates for the necessary machines.☀️

Būklė: labai geros būklės (naudotas), Gamintojas: ESTARTA Modelis: 312 Tipas: Becentrė šlifavimo staklės Pagrindinio šlifavimo disko matmenys: 508 x 304,8 x 160 mm Bwsdpfxex Iu E De Al Aew Šlifuojamo diametro min./maks.: 1,5 / 75 mm Reguliuojamos disko plotis: 160 mm Reguliuojamo disko matmenys: 304,8 x 190,5 x 160 mm Maksimali šlifavimo ilgis plongeé režime: 160 mm Šlifavimo disko plotis: 160 mm Šlifavimo galvos variklio galia: 11 kW Staklių matmenys: 2015 x 1280 x 1440 mm Svoris: 3500 kg

Būklė: naudotas, Gamybos metai: 1997, Pressing force: 315 t Bwsdpfx Ajuqd Tmsl Aew Adjustable ram stroke: 30 - 100 mm Ram adjustment: 100 mm Die height (stroke down, adjustment up): 370 mm Table clamping surface approx.: 1600 x 1100 mm Ram clamping surface approx.: 1600 x 1100 mm Pass-through opening in table: 600 x 180 mm Strokes per minute: 15 - 180 min⁻¹ Table height above floor: 1200 mm Power requirement: 170 kW Height above floor approx.: 4900 mm Dimensions LxWxH: 4900 x 1900 x 4900 mm Machine weight approx.: 55 t Standard equipment: The press was rebuilt in 2015 to CE standard. In 2021, the press was upgraded with a SIEMENS S7-TIA control. The coil line still features a SIEMENS S5 controller. Additional equipment: Stroke bars in the press table Automation: KEMMERICH coil line consisting of: Uncoiler: Load capacity: 5 t Straightener: Roller diameter: 70 mm Material thickness: 1 - 4.5 mm Strip width: 300 mm Roll feed: Roller diameter: 160 mm Feed length: 0.1 - 9,999.9 mm Strip width: 30 - 350 mm Material thickness: 0.2 - 10 mm Material cross-section: 1,500 mm² Feed accuracy: +/- 0.05 mm Loading saddle

Būklė: labai geros būklės (naudotas), Gamybos metai: 2010, Palmary GU20x40NC Universalschleifmaschine Baujahr: 2010 TECHNISCHE DATEN: Kapazität Schwenkbereich über Tisch: Ø210 mm Spitzenweite: 400 mm Max. Außenschleifdurchmesser: Ø200 mm Max. Werkstückgewicht zwischen Spitzen: 60 kg Schleifscheibe Außendurchmesser x Breite x Innendurchmesser: Ø355 x 38 x Ø127 mm Lineargeschwindigkeit: 33 m/s Schleifscheibenachse – X-Achse Manueller Verfahrweg: 135 mm Automatischer Eilgang: 25 m/min Max. Hub: 185 mm Kleinste Verstelleinheit: 0,001 mm Handradumdrehung (Skalenteilung): 2 (0,005) mm Bwjdpfxsytftbe Al Aow Tisch – Z-Achse Verfahrgeschwindigkeit: 1,5 m/min Max. Hub: 480 mm Automatischer Hub, min.: 8 mm Handradumdrehung (2-Stufig): 20 mm (2 mm) Schwenkbereich: -3° bis +12° Werkstückspindelstock Schwenkbereich: -30° bis +90° Kegeldorn: M.T. No. 3 Spindeldrehzahl (stufenlos): 10–300 U/min Max. Werkstücklast auf Spindel (inkl. Aufnahme): 15 kg (max. Länge: 100 mm) Reitstock Kegeldorn: M.T. No. 3 Hub: 20 mm Feineinstellbereich: ±0,03 mm Motoren Schleifspindel: 2,2 kW (4 PS) Leistung Gesamtanschlusswert: 7 kVA Behälter Schleifspindel-Schmiermitteltank: 7 l Hydrauliktank: 46 l Kühltank: 110 l Maschinengewicht: 2000 kg Zubehör/Optionen: - Schleifscheiben - Flansche - Innenschleifspindel - Marposs Aktiv-Messsystem - 2-Achsen-DRO-System, SINO - Handwerkzeug - Dokumentation Unter Strom in unserem Lager.

Būklė: naudotas, A used, well-maintained Vöest Alpine guillotine shear Cutting length: 2010 mm Cutting capacity in steel up to 370 N/mm² tensile strength: 5 mm Strokes per minute: 50 spm Hold-down pressure: 30 bar Number of hold-downs: 8 pcs. Backgauge manually adjustable: 950 mm Bwjdpfopgmpdex Al Asw Throat depth: 150 mm Dimensions (LxWxH): 280 x 190 x 140 cm Weight: 2500 kg

Gamybos metai: 2023, būklė: naujas, Ultraschallschreiniger mit SPS-Steuerung, speziell für medizinische Anwendungen konzipiert. Kapazität: 50 Liter Automatische Befüllung: vorhanden Automatische Dosierung: vorhanden Deckel: pneumatischer Kolben Programmierbar: ja, mit SPS Füllstandskontrolle: vorhanden Ultraschallschreiniger, Ultraschall-Entfettungsanlage, Ultraschallwaschanlage, kompakte Ultraschallreinigungsmaschine, medizinischer Ultraschallschreiniger, Automobilbereich Bwodpfefg Eqwsx Al Aow