Medienos smulkintuvas

Robust Reuser SD 700/22 kW with Z conveyor

Būklė: naujas, Gamybos metai: 2024, keliamoji galia vienai konsolės svirčiai: 500 kg, lentynos aukštis: 3 200 mm, bendras ilgis: 2 100 mm, bendras aukštis: 3 200 mm, ašių atstumas: 1 000 mm, apkrova vienai atramai: 2 500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack uprights, height 3.2 m, with foot section, 1.8 m usable depth (2 m total depth) 12 cantilever arms with 1.8 m usable depth (for chipboard sheets approx. 2.1 m deep) Longitudinal and diagonal braces for 4 m rack length (1.3 m spacing) Mounting hardware (bolts, nuts, and washers) Net price: €2,490.00 plus VAT. Detailed description: - Robust steel construction made of IPE sections (bolted system) - Rack height 3,200 mm - Load capacity per upright: 2,500 kg - Foot section and cantilever arms: 1,800 mm usable depth (for 2,100 mm chipboard depth) - Cantilever arms height-adjustable in 100 mm increments - 4 bolted cantilever arms per upright, standard (= 5 storage levels) - Load capacity per cantilever arm: 500 kg - Includes longitudinal and diagonal bracing for 1,000 mm spacing - Rack length = 2,100 mm - Includes mounting material (excluding floor anchors) Dksdpfx Aajqt Dmyeijr - With assembly instructions and C4 load signs according to DIN standard - Made in Germany - Short delivery times Our cantilever racks are produced exclusively in Germany. We offer reliable shipping with advance notification prior to delivery. Materials are sensibly packed to enable easy unloading. Delivery for items in stock can be made approx. 1 week after receipt of order. When installed outdoors, load capacities are reduced due to wind and snow loads. The surface must be concrete, level, capable of accepting anchor bolts, and able to absorb the acting loads. Floor condition and load bearing capacity as well as any permits required by authorities must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site. Anchoring to a wall is neither necessary nor recommended. According to trade association guidelines, it is recommended that rack uprights have at least 500 mm clearance above the top storage level relative to the top of the upright.

Būklė: naujas, Agregatas yra naujas, komplekte su valdymo sistema, dyzelino baku, išmetimo sistema ir akumuliatoriais. Aprašymas: Modelis: NWR35 Ricardo variklio „Newpower“ generatorius, elektros generatorius. Nominali galia: 24 kW / 30 kVA Maksimali galia: 26 kW / 33 kVA Variklis: Kofo Ricardo N4100DS-30, 4 cilindrai, vandeniu aušinamas. Jungtis: maitinimo pertraukiklis. Dažnis: 50 Hz. Įtampa: 400/230 V Į komplektą įeina: mechaninis sūkių reguliatorius, AVR, akumuliatoriaus įkroviklis, cinkuotas garso izoliatorius, aušinimo skysčio šildytuvas. Valdymo blokas: Comap AMF8, prijungimas prie elektros tinklo. Matmenys: 2180x960x1260 mm, svoris: apie 900 kg. Dyzelino bakas: 102 l. Esant 100 % apkrovai: 7,15 l/val. Dkodpjkh Hbpofx Aaier Esant 75 % apkrovai: 5,8 l/val. Esant 50 % apkrovai: 3,7 l/val. Tinklo stebėjimas, prijungimas prie elektros tinklo, garso izoliacija. Paruoštas naudoti iš karto. Papildomos išlaidos: 63 A automatinis perjungiklis: 572 EUR. 100 A automatinis perjungiklis: 709 EUR. Pristatymas: - Galimas visame pasaulyje, įskaitant iškrovimą, už papildomą mokestį. - Norėdami gauti tikslią pristatymo kainą, atsiųskite mums užklausą su savo duomenimis ir pilnu adresu. - Galima pristatyti nuo balandžio mėn.

Būklė: naujas, Gamybos metai: 2024, TECHNICAL DATA Table size: 1100 x 760 mm Table height: 870 mm Spindle: Non-removable 30 mm Clamping height: 140 mm Height adjustment: 125 mm Extraction ports: 2 x Ø 120 mm Speeds: 3000 / 4500 / 6000 / 9000 rpm Colour: RAL 7035 Light Grey and RAL 5000 Violet Blue Net weight: approx. 800 kg TECHNICAL DESCRIPTION Solid German engineering Spindle moulder with single-sided tilting, fixed spindle for a swiveling range from -5° to +45.5° Electronic positioning control for height and tilt adjustment, with zero point reset for height and offset positioning Electronic displays for position and spindle speed 4 spindle speeds: 3000 / 4500 / 6000 / 9000 rpm Quick-release belt tensioning device Push buttons for spindle start and stop Forward and reverse rotation Quick clamping system for cutters Finely planed grey cast iron table with fixed frame support Control panel mounted below the fixed frame support Fence 216, total adjustment via handwheel and LCD display, including cast iron fence plates and aluminium chip guards Machine socket Lockable main switch Mechanical motor brake Milling guard and pressure device GAMMA V 1629 Curved milling fence 1639 Tapoa Spindle diameter 30 mm, non-removable Dsdpofpb Nmsfx Aaiekr CE compliant GS tested

Būklė: labai geros būklės (naudotas), Gamybos metai: 1988, veikimo valandos: 3 100 h, Funkcionalumas: visiškai funkcionalus, bendras svoris: 8 960 kg, Willibald MZA 2500/Smulkintuvas/Šakų smulkintuvas/Malūnas • Gamintojas: Willibald • Modelis: MZA 2500 • Pagaminimo metai: 1988 • Darbo valandos: 3100 val. • Variklis: V6 Mercedes-Benz • Pralaidumas iki 75 m³/val. priklausomai nuo medžiagos • Praplatėjimas: 500 mm • Judančios kūjai • Organinės medžiagos skaidymas kompostavimui (sodo atliekos, šakos iki 30 cm skersmens) • Senos medienos bei atliekų susmulkinimas iki 30 cm skersmens • Ašių skaičius: 2 tandem / BW ašys • Stabdžių sistema: Pneumatinė • Jungties akis: 40 mm • Bendras svoris: 8960 kg • Vokiška mašina • Paruošta darbui • Šis pasiūlymas yra neįpareigojantis ir gali būti keičiamas. - Parduota gali būti bet kuriuo metu, - Galimi netikslumai ar rašybos klaidos. Dkjdpfxexu Dips Aaier - Pardavimas vykdomas pagal mūsų bendrąsias sąlygas.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2019, veikimo valandos: 180 h, Funkcionalumas: visiškai funkcionalus, bendras ilgis: 8 000 mm, bendras plotis: 1 200 mm, bendras aukštis: 1 300 mm, įvesties srovės tipas: Oro kondicionierius, įėjimo įtampa: 400 V, galia: 10 kW (13,60 AG), SOEST Universal Surface Treatment Line for oiling, staining, lye treatment, patination, etc. Primarily designed for parquet surfaces up to 40 cm workpiece width. 1) Roller machine RCR-400-L Reverse, for applying and removing surface products such as oils, stains, lacquers, etc. 2) Brushing machine VP-400-1B-2P-2B with one brush, two disc pads, and two additional brushes, for applying, working in, or patinating surface media into pores and/or for removal, distribution, or working depending on the desired surface effect. 3) Accessories include two spare application rollers, a material pump (brand new, never used), four spare brushes, various distributor pads, and a pneumatic brush cleaning machine. This complete surface treatment line is built for professional industrial use and is configured with the highest level of equipment. A wide range of accessories such as additional rollers and cleaning machines are included (see pictures!). Very robust construction, all motors are frequency-controlled (Siemens). Speeds are infinitely adjustable for both forward and reverse operation. Maximum workpiece width approx. 410 mm. The system is in excellent condition, with only around 180 operating hours, and is therefore considered as good as new. This surface machine was only used as a backup line in a parquet production and was deployed only for specific surface techniques, hence the very low operating hours. That means the line was used only sporadically between 2019–2022. In 2023, our company downsized, and the system has been stored since then—immediately available and therefore in almost mint condition! We no longer require this system and are therefore selling it. The original purchase price of this line in 2019 was approximately €87,000; the current price is negotiable! Djdjyaiafspfx Aaijkr Viewings of this line are welcome by prior arrangement. If required, we can also offer 10 drying rack trolleys for sale with this system. (The YouTube video is for reference only and shows a similar system configuration!)

Būklė: labai geros būklės (naudotas), Gamybos metai: 2019, mašinos/transporto priemonės numeris: 32006, įėjimo įtampa: 480 V, Der Sprinter für Verzahnungen mit kurzen Eingriffbreiten bis 100 mm Die Zahnwälzstoßmaschine 100S ist optimal geeignet für kleine Eingriffbreiten zum Stoßen von Außen- und Innenverzahnungen, sowohl gerade als auch schräg, sowie für ballige und konische Verzahnungen. Mit einer Stellfläche von nur 6 m² zählt die 100S zu den kompaktesten Maschinen ihrer Klasse. Ausstattung: - Siemens Sinumerik 840D SL Steuerung - Hydraulikanlage - 180 Grad Beladesystem - HSK-63 Spindel - Automatische Hubverstellung - Späneförderer - Spänekorb - Flexlink-Automatisierung - Festo Pneumatik - Rittal Schaltschrank-Kühlgeräte - Kältemaschine - 480/3/60, 35 kVA Motor & Steuerungen Technische Daten: Werkstück mit Außenverzahnung: - Größtes Modul (Stahl ca. 600 N/mm²): 3 mm - Maximale Eingriffbreite: 26 mm - Maximaler Durchmesser: 100 mm Dsdpfxortrvye Aaiokr Werkstück mit Innenverzahnung: - Größtes Modul (Stahl ca. 600 N/mm²): 3 mm - Maximale Eingriffbreite: 26 mm - Maximaler Schwingdurchmesser: 150 mm - Maximaler Innendurchmesser: 100 mm Werkzeug: - Zentrierkegel in der Stoßkopfspindel: HSK-D63 - Durchmesser Stoßspindel: 85 mm - Maximale Hubhöhe: 30 mm Verfahrwege der Maschine: - Radial (X-Achse): 180 mm - Säulenneigung (B-Achse): -1 bis +11 Grad Werkstücktisch: - Außendurchmesser: 220 mm - Spann-Ø: 160 mm - Bohrung: 63 mm Geschwindigkeiten: - Vorschub X-Achse: 12.000 mm/min - Werkstücktisch (C-Achse): 0–400 min⁻¹ - Werkzeug (C2-Achse): 0–300 min⁻¹ - Stoßspindel (A-Achse): 500–3.000 min⁻¹ Elektrische Ausrüstung: - Betriebsspannung: 480 V - Versorgungsspannung: 115 V - Steuerspannung: 24 V - Frequenz: 60 Hz - Anschlussleistung: 35 kVA - Kabelquerschnitt: 35 mm² - Absicherung: 80 A Abmessungen (L x B x H): 3.380 x 3.950 x 3.015 mm Maschinengewicht: 7.800 kg

Būklė: labai geros būklės (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, Costa Righi parketo grioveliavimo staklės, modelis Zefiro 2200 Didžiausias atstumas tarp išorinių diskinių pjūklų: 2200 mm Naudingas ruošinio pravažiavimas: 2400 mm Įtrauktas juostinis padavimas ir įvedimo grandinės Peiliai įtraukti Djdjx Rrqvspfx Aaijkr

Būklė: naudotas, Gamybos metai: 2020, Power: 18 kW (25 HP) Dksdpfxox I Dubs Aaisr

Būklė: naujas, Gamybos metai: 2024, SCHORR Ride-on Sweeper Electric Sweeping Machine Street Sweeper Floor Cleaner Powerful and smooth-running sweeper for indoor and outdoor use. Equipped with an optional spray nozzle. The ride-on sweeper provides a comfortable and efficient solution for floor cleaning. The ergonomic seat and intuitive controls enable effortless operation, even over extended periods. The powerful motor ensures thorough cleaning even in demanding conditions. With a generous 80-litre debris hopper, large areas can be cleaned without frequent interruptions. This combination of comfort and efficiency makes floor cleaning a stress-free and pleasant task. Standard LED work lights make it easier to work in darker areas. With 1920 watts of power delivered by a 48V system, the sweeper is well equipped to provide you with over 4 hours of continuous operation. SCHORR Ride-on Sweeper RR80KM – Discover the advantages: -- Fully electric ride-on sweeper with 1250mm working width – ideal for large indoor and outdoor areas -- 48V/1920W power -- 80-litre bagless rear debris hopper, easily extendable and emptied -- Powerful 48V, 58Ah system -- Optional spray nozzle for reduced dust emission -- Extremely simple operation -- Outstanding manoeuvrability Technical Data Manufacturer (Short): SCHORR Manufacturer Model: RR80KM Drive: Ride-on Power: 1920W Operating time: approx. 4 hours Number of wheels: 4 Tyres: PU (non-slip) Net weight: 400kg Basic Dimensions Debris hopper volume: 80l Fresh water tank volume: 10l Main brush diameter: 500mm Overall length: 1600mm Overall height: 1300mm Overall width: 1250mm Sweeper width (without brushes): approx. 80cm *Additional technical data available upon request. The chassis is made entirely of flexible and robust plastic, minimising the risk of damage to objects such as walls. Apart from the side brushes, no components protrude beyond the body, allowing work as closely as possible to objects. The debris hopper is made of rigid steel and can be conveniently removed from the rear of the machine. Sensitive components like the front lights are protected by a metal bumper. Overall, the machine is perfectly equipped for most applications. Naturally, we generally keep all spare parts in stock and can deliver them quickly should you ever encounter a problem. If you require technical support, we have the necessary expertise and can also carry out repairs in our in-house workshop. Would you prefer to finance or lease the device? No problem! We also offer attractive options for this. Feel free to contact us and we will advise you on the various possibilities. We look forward to your enquiry! Dkodpfx Aouac D Usaijr The SCHORR team will be glad to assist you with any questions regarding our ride-on sweeper. Our knowledgeable staff are available by phone or e-mail. We look forward to hearing from you and providing support with your enquiry.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1997, Weima Einwellenshredder Dodjivpthjpfx Aaiskr Modell: WL6S Hauptantrieb: 22 kW