Virpesių generatorius | Galios stiprintuvas

RMS SW 1511/2

Sąlyga: naujas, Gamybos metai: 2023, ENERGY T20000 20.00 kVA / 16 kW At 400V: 20.00 kVA /// 16 kW At 230V: 16.00 kVA /// 12.8 kW Weight: 255 kg Dimensions: L= 970 mm, W= 680 mm, H= 955 mm RPM Duodpfx Absipvhke Sel 3000 Frequency: 50 Hz Voltage: 230/400 V Current: 32.0A at 400V, 70A at 230V PETROL (EURO V) Electric start Engine output HP (kW): 32 (23.8) Cylinders: 2 Cooling system: Air Safety features: Low oil level protection Governor: Mechanical Fuel consumption at 75% load: 9.8 l/h Fuel tank capacity: 65 l Voltage regulation: AVR Voltage accuracy: ± 1% * 2 CEE sockets, 32A, 3-pin, 230V single-phase * 1 CEE socket, 32A, 5-pin, 400V three-phase * 1 x 12V DC output * Voltage selector switch (400V three-phase or 230V single-phase) * LED multifunction meter: voltmeter, ammeter, kW meter, frequency meter, and hour counter Unit is fitted with 2 stable wheels and 2 support legs for mobility. The handles are foldable to save space. ENERGY Thunder series emergency generators are not suitable for continuous operation! However, emergency power supply can be provided without any problem! ENERGY T20000 Full service kit €78.00 incl. 20% VAT * Worldwide transport including unloading available at extra cost * Invoice with VAT shown will be issued

Gamybos metai: 2006, Sąlyga: geras (naudotas), Power generator, emergency power generator, generator set, unit, current generator, power unit, emergency generator - Soundproofed - Output: 7.0 kVA 50 Hz - Petrol engine: Honda - 2x: Schuko 230 Volt - 1x: CEE 380 Volt socket - 1x: charging cable socket 12 Volt Dsdpfxjcgan Ao Ab Sjul - Unit dimensions: 590/780/H750 mm - Weight: 136 kg

Sąlyga: labai geros būklės (naudotas), Heraeus Vötsch Climate Test Chamber We offer here a Heraeus Vötsch climate test chamber. Heraeus Vötsch climate test chamber with humidity control (water-cooled) Dujdpfxomt Du To Ab Sol Test chamber internal dimensions: width 800 mm x depth 800 mm x height 950 mm Housing dimensions: width 1090 mm x depth 1960 mm x height 1995 mm Specifications for temperature testing: Temperature range: -45°C to +180°C time stability: ±0.1 to ±0.5 K spatial uniformity: ±0.5 to ±1.5 K Temperature change rate according to IEC 60068-3-5 Heating: 4.0 K/min Cooling: 3.0 K/min Specifications for climate testing: Temperature range: -45°C to +180°C Temperature deviation at steady state, according to IEC 60068-3-5 depending on the test chamber temperature Temperature range: -10°C to +95°C time stability: ±0.1 to ±0.3 K spatial uniformity: ±0.5 to ±1.0 K Humidity range: 10% to 98% RH Humidity deviation over time: +1 to ±3 Electrical connection: Rated voltage: 3/N/PE AC 400V±10% 50Hz Rated power: 7.8 kW Rated current: 15.0 A Refrigerant: R452A Test chamber capacity: approx. 600 liters Weight: approx. 620 kg net Type: VC³ 4060 For your security as a buyer, the following information! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a trial run monitored with calibrated equipment. Condition: used Scope of delivery: (See picture) (Subject to changes and errors in the technical data and specifications!) Feel free to contact us by phone for any further questions.

Gamybos metai: 2003, Sąlyga: geras (naudotas), Pad printing machine, NIR POWER TC 24, incl. tunnel dryer for solvent-based coatings, year of manufacture: 2003, price: 1,900 Euro, contact person: Mr. Rainer Eckerle Dedpfod Ai Hksx Ab Soul

Gamybos metai: 1978, Sąlyga: labai geros būklės (naudotas), Macmon M 100 D tool milling machine with 3-axis Fagor digital readout, from a training department, featuring a fixed table and SK 40 spindle taper. Accessories include various collets and milling arbors. The machine is in very good, operational condition and can be demonstrated under power by appointment. Dedpshtfubofx Ab Soul

Sąlyga: naujas, Typ DTW-120A Horizontale Dreiachsausführung Duodpfx Abjd Tquio Sel Bürstenwalzenhöhe: 300/600/300 mm Bürstenwalzendurchmesser: 300 mm Walzengeschwindigkeit: frequenzgesteuert Leistung: 1,5 kW Transportabmessungen: 1780 x 760 x 880 mm Gewicht: 165 kg Preis für Ersatz-Schleifstreifen (Bürsten mit Schleifpapier): 3,60 € zzgl. MwSt. pro 1 m

Sąlyga: naujas, Tipas: DTL-20A Šepečio veleno aukštis: 200 mm Šepečio veleno skersmuo: 300 mm Veleno greitis: dažnio valdymas Elektrinis pakėlimas ir nuleidimas Dedpfx Asd Tqtyeb Ssul Galia: 0,75 kW Transportavimo matmenys: 860x750x1100 mm Svoris: 140 kg Atsarginės šlifuojančios juostos (šepečiai su švitriniu popieriumi) kaina: 3,6 € + PVM / 1 m

Sąlyga: geras (naudotas), VLM Type: V.745.672.120 Model CC 1000-FL HL Corrosion Test Chamber for Salt Spray Tests Specifications: Test Chamber Volume: approx. 1000 L Test Chamber Dimensions (W x D x H1/H2): 1400 x 800 x 800/1020 mm Door Opening Dimensions (W x H): 1300 x 680 mm External Housing Dimensions (WxDxH): 2162 x 995 x 2080 mm Operating Temperature Range: 5°C above ambient up to +80°C High-load version for a maximum load capacity up to 350 kg Process Control: Beckhoff PLC, Color Touchscreen Display, 50 memory slots for test procedures, 50 memory slots for test segments, Ramps: humidity-temperature across the entire working range, Duodpfx Aot Igc Ssb Ssl Ethernet interface Electrical Connection: 400 V, 50 Hz, 5700 W Tap water: min. 2.5 bar, 3/4" tap connection, external thread for connection of an ion exchange cartridge Compressed Air: 7-8 bar Waste Water: Siphon / 30 mm ID hose nozzle Exhaust Air: pipe end OD 75 mm Operating modes: Salt spray (fog) Condensed water (CWC) Ambient air ventilation Hot air Controlled humidity

Sąlyga: labai geros būklės (naudotas), VLM Climate Corrosion Test Chamber We are offering you a climate-corrosion test chamber from VLM Name: Condensation Water Test Device (Corrosion Test Cabinet) Manufacturer: VLM Korrosions-Prüftechnik GmbH Description: The chamber is designed for testing the corrosion resistance of metallic materials and surface treatments via salt spray corrosion tests (NSS) according to: DIN 50021 SS, ASTM B 117-73, ISO 9227, and other methods, as well as condensation tests. Chamber volume: 400 liters Front door material: Safety glass, clear shield coating on the inside Dujdek H Akgjpfx Ab Sjl Weight: 140 kg External dimensions (W x D x H): 1100 x 670 x 1090 mm Internal chamber dimensions (W x D x H): 800 x 605 x 920/733 mm Chamber volume: 400 l Door opening (W x H): 740 x 600 mm Maximum sample rod load per rod: 20 kg Operating voltage: 230 Volts Frequency: 50-60 Hertz Power input: 1,850 W Chamber temperature range: Max. 55°C Temperature controller: Microprocessor controller PID Temperature stability: ±0.2 K LED display resolution: 0.1°C Deionized water quality: max. 20 µS/cm Humidifier water consumption: approx. 0.5 l/24 h Test water consumption: approx. 0.4 l/h Water supply pressure: 3/4" 2-4 bar Compressed air requirement: approx. 16 m³/h Type: Salt Chamber SAL 400 V.713.062.000 Condition: used Scope of delivery: (see picture) (Subject to technical changes and errors in data and specifications!) For further questions, feel free to contact us by phone.

Sąlyga: labai geros būklės (naudotas), Here we offer a Vötsch climatic test chamber. Model: VC³ 4100, air-cooled With a temperature change rate of 3 K/min Test chamber dimensions: Height 950 mm x Width 1100 mm x Depth 950 mm Unit dimensions: Height 2000 mm x Width 1300 mm x Depth 1916 mm Dedpjqwim Eefx Ab Seul Volume: 990 liters Feed-throughs: Ø 125 mm, Ø 50 mm Data for temperature tests: Temperature range: -42°C to +180°C Temporal temperature deviation: ± 0.1 to ± 0.5 K Spatial temperature uniformity: ± 0.5 to ± 1.5 K Temperature change rate: Heating: 4.0 K/min Cooling: 3.0 K/min Max. heat compensation at +20°C: 4500 Watts Data for climate tests: Temperature range: +10°C to +95°C Dew point range: -3°C to +94°C Humidity range: 10 to 98% RH Temporal temperature deviation: ± 0.1 to ± 0.3 K Spatial temperature uniformity: ± 0.5 to ± 1.0 K Temporal humidity deviation: ± 1 to ± 3% RH Heat compensation max.: 500 W Voltage: 3/N/PE AC 400V ± 10% 50Hz Nominal power: 11.5 kW Nominal current: 22.0 A Refrigerant: R-404A Weight: approx. 840 kg Type: VC³ 4100 For your security as a buyer, please note the following information! The following measures are performed on all of our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Upon completion of testing, the chambers undergo documented trial operation. Condition: used Scope of delivery: (see picture) (Technical specifications subject to change and errors excepted!) We are happy to answer any further questions by phone.