S-60K (6)

Riko Ekos d.o.o S-60K (6)

Sąlyga: naudotas, Plant: Inclined Clarifier, Lamella Clarifier, Lamella Separator Condition: Used, up to 120 m³/h depending on the medium Design: Robust, high-performance construction Material: Stainless steel (VA) on container frame, 30' container, scraper plates: made of PP Dsdpfxjppyhto Admsla Dimensions (LxWxH): 7580 x 2435 x 3000 mm Weight: approx. 8,000 kg Operating Principle: The wastewater is fed to the inlet of the inclined clarifier and flows downward. Due to the arrangement of the lamella plates inside the clarifier, the water is redirected below the lamellas and then flows upwards through the plates. As a result, solids settle onto the lamellas and the clarified water is directed to the outlet. The solids gradually slide down along the lamella plates, where the sludge funnel is located. Rake Mechanism: Optionally, we offer the inclined clarifier equipped with a rake mechanism, which keeps the sludge in a flowable condition. Application: Separation of solids and liquids by sedimentation. Inclined clarifiers are often used as a pre-stage before filter presses or decanters for thickening. By pre-thickening thin sludge, the filter press can be designed with a smaller filter area. The plant is in good condition and is available for rental or purchase. An inspection at our facility can be arranged by appointment. We also offer new inclined clarifiers with a lead time of approx. 8 to 10 weeks!

Sąlyga: naujas, Bunker belt system suitable for feeding presses, shredders, etc. Delivery possible throughout Europe. Technical specifications: Dedpfx Aodxwlqsdmsla Item 1: Feed hopper Item 2: Infeed conveyor 1.5 kW, conveyor width: 1100 mm, axle distance: 3500 mm Item 3: Inclined conveyor 1.1 kW, conveyor width: 1100 mm, axle distance: 4700 mm Standard discharge height: 2800 mm (can be increased with spacer feet as shown in the illustration) Made to order Further information and data available on request.

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2005, veikimo valandos: 30 408 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 50 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 250 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 720 mm, balo svoris: 550 kg, bendras svoris: 16 000 kg, alyvos bako talpa: 600 l, paskutinio kapitalinio remonto metai: 2024, Technical Data – Baler: Manufacturer: Presona AB Model: LP 50 EH1 Year of manufacture: 2005 Operating hours: 30,408 hours (as of April) Number of bales pressed: 198,059 units (as of April) Main press ram force: 50 t Specific pressing force: 63 N/cm² Theoretical throughput: 530 m³/hour Throughput under operating conditions: 260 m³/hour Djdpsu Thhrjfx Admela Feed chute dimensions: 1,250 x 1,100 mm Press chamber volume: 2.2 m³ Bale dimensions: 1,100 x 720 mm, length variable Drive power: 22 kW Tying: 5-fold vertical, fully automatic Throughput rates at a bulk density of: - 30 kg/m³: 6 to 7 t/hour - 50 kg/m³: 7 to 9 t/hour - 100 kg/m³: 11 to 14 t/hour Bale density (paper/newspapers): 400 to 550 kg/m³ Hydraulic oil tank capacity: 600 L PLC: Telemecanique TSX Micro Operator panel: Schneider Magelis Effective transport dimensions excl. press: 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight (press only): approx. 16 t Condition of the baler: The machine underwent partial refurbishment and general maintenance in our workshop. After completion of the refurbishment, the baler was tested in operational mode and is now available for immediate sale. The following refurbishments were carried out: General work: - Machine cleaned, derusted, primed, and partially repainted - Wire entry marks in the press channel openings welded and smoothed Hydraulic unit: - Hydraulic oil tank fully drained, cleaned, and refilled with new oil - Oil and air filters replaced - Leaking oil sight glass on the hydraulic tank replaced - All hydraulic hoses replaced Electrical system: - Program menu language set to English - Two key switches on the operator panel replaced - Control cabinet replaced - Signal lamp on the control cabinet replaced - Flap limit switch replaced - Wirthulator electrics renewed, connected, and tested Press ram: - All four guide rollers on the press ram removed and replaced - Main hydraulic cylinder disassembled, overhauled (cylinder tube honed, complete seal kit replaced), leak test performed - All wear-resistant plastic blocks on the press ram replaced Pre-press flap: - Both bearings on the pre-press shaft replaced - Both hydraulic cylinders disassembled, overhauled (cylinder tubes honed, complete seal kits replaced), leak test performed - Scraper flap on the pre-press replaced Tying unit: - Two complete needles with wire guide pulleys replaced - Needles adjusted and set - All wire guide pulleys in needle heads replaced - Twisting fingers replaced - Two twister shafts replaced - All eight wear plates on the twister unit, under the twisting fingers, replaced Scope of delivery: Only the baler is sold. Documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagrams) is complete and available. Inspection by appointment possible. We do not accept liability for the technical data or possible errors.

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2012, veikimo valandos: 25 895 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 78 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 500 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 600 kg, bendras svoris: 24 000 kg, alyvos bako talpa: 1 000 l, galia: 55 kW (74,78 AG), tūrio srautas: 930 m³/val, Technical Data – Baler: Manufacturer: Presona AB Model: LP 80 VHK 1 Year of Manufacture: 2012 Total Operating Hours (Machine): 25,895 hours (as of July 2025) Effective Operating Hours (Pump): 14,135 hours (as of July 2025) Number of Bales Pressed: 235,597 (as of July 2025) Main Pressing Force: 78.5 t Specific Pressing Force: 95 N/cm² Dodpfevwlqqex Admjla Pre-Press Force: 28 t Press Chamber Volume: 2.7 m³ Feed Opening Dimensions: 1,500 x 1,100 mm Theoretical Throughput: 930 m³/hour Throughput Under Operating Conditions: 410 m³/hour Bale Dimensions: 750 x 1,100 mm Drive Power: 55 kW Tying: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at Bulk Density of: - 30 kg/m³: approx. 9 to 12 t/hour (material dependent) - 50 kg/m³: approx. 14 to 17 t/hour (material dependent) - 100 kg/m³: approx. 16 to 25 t/hour (material dependent) Throughput at MSW (Municipal Solid Waste): approx. 20 to 27 t/hour (material dependent) Bale Weights: 450 to 600 kg (depending on material and bale length) Hydraulic Oil Tank Volume: 1,000 L Baler Dimensions (assembled with hopper): 10,985 x 3,750 x 4,310 mm (L x W x H) Transport Dimensions (baler only): 10,985 x 2,300 x 2,900 mm Machine Weight (baler): approx. 24 t Condition of the Baler: The machine was partially overhauled and serviced in our workshop and, upon completion of the work, tested in both manual and automatic modes during operation. The following overhaul work was carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank completely drained and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram dismantled and cleaned - All four running rollers removed from the press ram and replaced - Twisting wire station with lower wire deflection pulleys cleaned and made operational - Side guides of press ram removed, smoothed, re-installed, and re-adjusted - Main hydraulic cylinder dismantled and disassembled for inspection - Piston rod replaced, cylinder tube honed - Complete seal set replaced, pressure test carried out - Hydraulic hose of main hydraulic cylinder replaced - Vertical and horizontal needle systems for tying dismantled, cleaned, wire deflection pulleys made operational and serviced - Chain cleaned, lubricated, chain tension readjusted - Drillomat cleaned, wire cutters, twisting shafts, and twisting fingers checked, retightened with appropriate torque, and serviced - Door contact switch checked and partly replaced - Emergency stop switch checked - Complete electrical wiring checked and partly renewed - Bearings of the wire guide rollers under the press replaced - New safety guards for vertical and horizontal tying manufactured and installed - Machine inspected, general maintenance performed, and baler tested in manual and automatic mode Scope of Delivery: Only the baler is being sold. Remarks: Full documentation is available (operating manual, CE declaration, electrical/hydraulic circuit diagram). Inspection by appointment is possible. No liability is assumed for technical specifications or possible errors.

Sąlyga: paruoštas naudoti (naudotas), Presavimoji Hsm HL 4809 LI - Didelė užpildymo anga, idealiai tinka didelėms dėžėms - Konteinerio vartymo įtaisas patogiam užpildymui Jėga kN: 480 - Įtampa/dažnis: 3 x 400 V / 50 Hz - Balo svoris kg (priklausomai nuo medžiagos): iki 400 kg - Balo matmenys ilgis x plotis x aukštis mm: 1200 x 1100 x 750 Djdora Dddjpfx Admjla - Įrenginio matmenys ilgis x plotis x aukštis mm: 5648 x 1849 x 2515 Tuščios eigos ciklo laikas sekundėmis: 53 - Rankinis surišimas: 4 kartus viela

Gamybos metai: 2003, veikimo valandos: 43 000 h, Sąlyga: reikia remonto (naudotas), mašinos/transporto priemonės numeris: HBC 140 2x75kW 2003 (W230-005), Verkocht door Bollegraaf Recycling Solutions, de originele fabrikant van deze Bollegraaf-pers en -transportband: Bollegraaf HBC140s Balenpers (2x75kW) Pers: Gewicht: 47.100 kg Bouwjaar: 2003 Uitsluitend Hardox bodemplaat Kunststof ventiel Anti-ratten bekabeling Draaiuren: 43.000 Deze balenpers kan ook volledig gereviseerd worden verkocht, conform de 'Bollegraaf OEM Gecertificeerde Revisiestandaarden'. Dit omvat 2 jaar garantie. Neem contact met ons op voor meer informatie of een offerte. Algemene uitgangspunten revisie Reiniging & demontage Voor de daadwerkelijke revisie wordt de pers volledig gereinigd en gedemonteerd in onze revisiewerkplaats. Toleranties Dlsdpfekcgynex Admea Na demontage worden de toleranties van alle stalen componenten gemeten en waar nodig opnieuw gelast. Dit geldt ten minste voor de volgende onderdelen: • Aandrijfram, • Frame, • Kanaal, • Voorpersklep Na demontage en inspectie wordt de ram opnieuw opgelast en voorzien van nieuwe ramwielen. De beschermroosters en de voorpersklep worden uitgedeukt en waar nodig gerepareerd. Overschilderd Na het meten van de toleranties en het uitvoeren van eventuele herstel- en laswerkzaamheden, worden alle onderdelen gestraald en opnieuw gecoat. Hydrauliek: De hydrauliektank wordt gereinigd. De hydraulische leidingen & slangen worden vervangen. De hydraulische componenten worden opnieuw afgedicht. De hydraulische olie wordt ververst. Bekabeling: Alle bekabeling wordt gecontroleerd en indien nodig vervangen. Alle lasdozen worden vervangen en teruggeplaatst op goed toegankelijke posities. Slijtdelen: Alle slijtdelen worden vervangen. De pennen en assen van de cilinders en het kanaal worden vernieuwd. Alle slijtdelen van de beide naaldeninstallaties en knopers worden vernieuwd. Cilinders: De cilinders worden opnieuw afgedicht en, indien nodig, voorzien van een nieuwe chroomlaag of een nieuwe cilinderstang. MCC-kast De schakelkast wordt gecontroleerd en gereinigd. Indien nodig worden elektronische componenten vernieuwd. De PLC en HMI (bedieningsinterface) worden vervangen door de nieuwste Schneider M340-versie inclusief de nieuwste software.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2002, Speed: 4500 rpm, max. drum diameter: 300mm/167mm, solids: 2.6kg/dm³, material temperature min./max.: 5°C/100°C, bowl dimensions X/Y: 300mm/1200mm, machine material: stainless steel, operating hours: 62,293 h. Spare parts included. On-site inspection possible. Dedpfx Asu Av H Dodmjla

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2006, veikimo valandos: 2 632 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 29.381, spaudimo jėga: 35 t, pildymo angos plotis: 620 mm, pildymo angos ilgis: 1 000 mm, bendras plotis: 2 380 mm, bendras aukštis: 2 500 mm, bendras ilgis: 6 625 mm, Įskaitant padavimo juostą. Mašina iš karto paruošta darbui. Dedpfevaw T Aex Admela

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2006, Balemaster Dodpfx Asrdwlksdmela Year: 2006 Model: CMG 268 Waste baler

Gamybos metai: 2004, Sąlyga: geras (naudotas),