Stalo frezavimo staklės

Rex F-59

Sąlyga: geras (naudotas), Table milling machine type 59F Ljdpfx Afjxzinkj Ishb Milling fence with fine adjustment Left/right rotation Good condition, cast iron machine 30 mm spindle

Sąlyga: naujas, AGRE ALUP ALLEGRO 14+ 13 270 Variable speed. Space-saving. Cost-effective. Efficient 1:1 direct drive. Simple operation. Low energy consumption. High performance. Suitable for a wide range of applications. Superior compressed air quality. Cyclone separator and refrigerated dryer integrated. Detailed equipment: Compression concept: Oil-lubricated screw compressor Cooling: Air-cooled design Drive: High-frequency motor, with 1:1 direct drive Control: Variable speed control with frequency inverter Controller: Graphic controller C55DD Refrigerated dryer: Integrated, refrigerant R513A Filtration: including cyclone separator Lsdpfx Aeixt I Hof Ishb Tank: horizontal, painted Performance data: Free air delivery at operating pressure 7.0 bar = 0.26–2.26 m³/min Operating pressure min. / max.: 5.0 / 12.5 bar Total power consumption at 10.0 bar / full load: 16.2 kW Motor rated power: 15 kW Oil quantity: 5.2 l Dimensions and weight: L x W x H = 1655 x 655 x 1550 mm Weight: 400 kg Compressed air outlet: G 3/4'' Compressed air receiver capacity: 270 l

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, 4 spindle speeds: 3000/6000/4500/9000 rpm. Right/left rotation Spindle lock via foot pedal Milling fence with fine adjustment Spindle diameter: 30 mm Extraction ports above and below, each 120 mm Spindle spanner Open-ended spanner 41 mm Cable and plug 16 amp. Lhodpfxoittnzj Af Ijb

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1962, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 7867/162, Power connection: 400V, 4.0 kW Extraction port: 1x Ø 100 mm, 1x rectangular 300x140 mm Spindle diameter: 30 mm Height adjustable via handwheel Lhsdoh Ux Rwjpfx Af Isb Spindle brake by cable pull Spindle lock by detent pin Forward/reverse operation 2 speeds Spindle non-tilting Dimensions (LxWxH): 1060 x 960 x 1100 mm Weight approx. 650 kg Unfortunately, we cannot respond to inquiries without complete contact details.

Sąlyga: naudotas, Working width: 1350 mm Number of sanding units: 2 pcs. Max. workpiece thickness: 160 mm Abrasive belt dimensions: 1370 x 2150 mm Feed motor: 0.75 HP Unitek Excel LC 1370 2N RKRT MODEL: Excel 2NRKRT 2-BELT MACHINE 1st BELT: ROLLER 2nd BELT: COMBINATION UNIT ROLLER/PAD FOR SOLID WOOD, VENEER, AND INTERMEDIATE LACQUER SANDING - Usable WORKING WIDTH mm: 1350 - SANDING BELT LENGTH mm: 1370 x 2150 - MAX. WORKPIECE THICKNESS mm: 160 - STEEL CALIBRATION ROLLER mm: 180 - Rubber-coated SANDING ROLLER mm: 180 - SANDING PAD WIDTH mm: 50 - BELT MOTOR POWER kW: 14.7 - BELT SPEED m/s: 18/16 - FEED MOTOR POWER HP: 0.75 - Variable speed drive for feed carpet, continuously adjustable SPEED m/min: 4/20 - HEIGHT ADJUSTMENT MOTOR HP: 0.33 - Mechanical BELT OSCILLATION “ECO GEAR PATENT SYSTEM” - 1 pc. DRUM BRAKE for belt braking - Pivoting ROLLER for belt tensioning - 3 pcs. PRESSURE ROLLERS; rubber-coated - EMERGENCY STOP STRIP at infeed - ELECTRONIC DISPLAY of workpiece thickness - 2 pcs. ROLLER TABLES with 2 rollers each at infeed and outfeed - AUTOMATIC CENTERING OF FEED CARPET - 1 EXTRACTION PORT with 160 mm diameter - AUTOMATIC TABLE POSITIONING PLEASE NOTE: New patented belt oscillation system: 1. Without valves 2. Without photoelectric barrier 3. Not sensitive to dust 4. Energy-saving, environmentally friendly system Since 2008, the machine model with this system operates continuously without lateral belt run-off! - Unitek steel calibration roller (same for all models) - Unitek flexible pressure pad before and after the roller (same for all machines with 1 roller) - Unitek grit compensation with mechanical grid-set with 6 positions (per piece – same for all models) - Unitek electronically segmented sanding pad with 24 segments (sanding width 1350) - Unitek belt motor power up to 18.4 kW instead of 14.7 kW (per motor) - Unitek surcharge for 2nd motor 14.7 kW (only for Excel 2-belt) - Unitek automatic table lowering in emergency stop (same for all models) - Unitek surcharge for frequency-controlled feed speed - Unitek surcharge for infeed/outfeed roller table with 4 rollers (same for all models) - Price per roller table - Unitek electronic control of machine functions with 12" touchscreen (same for all models) Automatic workpiece scanning with feed control --- Machine price in above configuration upon request! --- Options at additional cost: Surcharge for 3-belt machine Roller-Roller-Pad (Mod. 049): €8,390.00 Freight costs: €1,300.00 Lhedpfx Afermucxs Isb Assembly and instruction: €1,300.00 --- All prices stated are net prices plus statutory VAT (19%) --- (Technical data as per manufacturer – subject to change and errors excluded!)

Sąlyga: naudotas, Planer and moulder Weinig Hydromat 2000 for four-sided planing and profiling of timber with groove bed, without soundproof cabin. Spindles: 5 Spindle 1: Bottom / 7.5 kW Spindle 2: Right / 7.5 kW Spindle 3: Left / 11 kW Spindle 4: Bottom / 11 kW Spindle 5: Top / 15 kW Working width: 230 mm Lhsdpormvhfsfx Af Isb Working height: 160 mm Spindle diameter: 50 mm

Sąlyga: geras (naudotas), Tilting spindle moulder, table router, table milling machine - Spindle adjustment: height and angle - Tilting range: -3° to 45° Lhodpfxjh Nvyzo Af Ieb - Drive: 4.5/5.5 kW - Speeds: 3000/4500/6000/9000/12000 rpm - Power feed unit Holz-Her with 3 rollers - Useful spindle length: 100 mm - Spindle diameter: Ø 30 mm - Max. cutter diameter: Ø 220 mm - Dimensions: 1540/1100/H1520 mm - Weight: 962 kg

Sąlyga: naudotas, Ratų skersmuo: 500 mm Lsdpjwl D S Usfx Af Ijhb Sandėlio vieta: Nattheim

Sąlyga: geras (naudotas), Gamybos metai: 1990, pjovimo plotis (maks.): 1 000 mm, pjovimo aukštis (maks.): 140 mm, stalo ilgis: 1 400 mm, galia: 5,5 kW (7,48 AG), Types: F 45, Machine no.: 90-8-86 Lhodpfxstxh Nie Af Iob

Gamybos metai: 2022, Sąlyga: naujas, Thickness Planer KD410 Weight: 205 kg Voltage: 400 V – 3 phase, power (S6) 4.4 kW / 6.6 HP Ljdpfx Afjgx T Hhe Iehb Chip and dust extraction port diameter: 100 mm Planer table dimensions: 600 x 410 mm Maximum planing height: 230 mm Cutterhead diameter: 70 mm Number of knives: 3 Maximum cutting depth per pass: 4 mm Rotational speed: 5,500 rpm Feed speed: 6 m/min Accessories: - Handwheel with height indicator for thickness planer - Tersa cutterhead system Location: Ex stock 54634 Bitburg - immediately available -