Derinimo presas

Reis Tus 130-200

Sąlyga: geras (naudotas), Gamybos metai: 1998, Manufacturer: REIS Model: TUS 130 - 200 Control: Siemens SIMATIC OP7 Year of manufacture: 1998 Specifications Metric US Standard Distance between uprights: 1360 mm Installation height: 1700 mm Table length: 1600 mm Ram stroke: 1800 mm Approach speed: 200 mm/min Working speed: 50 mm/min Return speed: 180 mm/min Table travel distance: 1700 mm Lhedpfou U Nb Asx Af Isb Approximate dimensions Length: 4900 mm Width: 2800 mm Height: 5600 mm Weight: 18,800 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, sourced from the manufacturer. All information is supplied in good faith but its accuracy cannot be guaranteed. Therefore, this does not constitute a representation or contractual condition. We recommend verifying all critical details.

Gamybos metai: 1994, Sąlyga: labai geros būklės (naudotas), mašinos/transporto priemonės numeris: 04.2398, Manufacturer: Arthur Klink Model: RIW 10 x 1500 x 500 Machine No.: 04.2398 Year of Manufacture: completely overhauled by the manufacturer in 1994 Weight: 3,700 kg Pulling Force: 10,000 kg (100 kN) Lsdpfxsgyd T Ej Af Ishb Maximum Stroke: 1,500 mm Maximum Workpiece Diameter: Ø 500 mm Broaching Speeds: infinitely variable from 1 m/min to 6 m/min Return Speed: infinitely variable up to 20 m/min Power Supply: 400V / 50Hz

Gamybos metai: 1999, Sąlyga: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Manufacturer: Arthur Klink Year of manufacture: 1999 Type: Horizontal Broaching Machine Model: RIW 10x1600x400 Weight: 2,700 kg General / Technical Data: Horizontal hydraulic internal broaching machine in near-new condition, equipped with a tool lift system, ideal for the use of flat broaching tools. Broaching stroke: 1,600 mm Tensile force: 10,000 kg (100 kN) Tool holder in drawbridge: Ø 85 mm cylindrical Through-hole in clamping table: Ø 100 mm Workpiece diameter: max. 400 mm (limited by the machine body of the tool tray) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Machine dimensions (W x D x H): approx. 6,400 mm x 1,450 mm x 1,600 mm (without working area) Power supply: 400 Volt, 50 Hz Connected load: 9 kW Lsdpfx Afjr A Hcbe Ijhb Equipment: • The machine has an electric control for the broaching stroke movement with both manual and automatic operation. • Integrated coolant/lubrication system • Tool lift system for flat broaching tools (no automatic feed) • The broaching slide with pull head holder is equipped with flat guides on both sides Accessories: • 1 universal pull head for flat shanks from 3 mm up to max. 25 mm width and a maximum tensile force of 10 kN (10,000 kg) • Complete machine documentation, including CE declaration of conformity Remarks: The machine is ideal for manufacturing keyway slots. Thanks to its robust machine bed and the integrated tool lift system, it is especially well-suited for quick and easy use of flat broaching tools. The machine has had very limited use and is in near-new condition. The machine is available for inspection at our warehouse and can be demonstrated under power. Our direct contact details and further information about the machine can be found in the attached PDF document.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2019, veikimo valandos: 11 832 h, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 850 mm, Y ašies eiga: 700 mm, Z ašies eigos atstumas: 500 mm, sukimosi greitis (maks.): 15 000 aps./min, įrankių magazino lizdų skaičius: 38, A ašies pasukimo kampas (min.): −139 °, A ašies pasukimo kampas (maks.): 91 °, C ašies pasukimo kampas (maks.): 360 °, TECHNICAL DETAILS Travel X-axis: 850 mm Travel Y-axis: 700 mm Travel Z-axis: 500 mm Control type: Heidenhain TNC 640 Rapid traverse linear X-Y-Z: 35 – 35 – 35 m/min Linear acceleration X-Y-Z: 6 m/s² Feed force linear X-Y-Z: 7,000 N Max. jaw opening: 625 mm Workpiece dimensions Max. diameter: Ø 650 mm Max. height: 500 mm Interference circle (A-axis) in 0° position: Ø 885 mm Spindle data Lhodpfxevw Sdqo Af Isb Speed: 15,000 rpm Power/torque: 20% duty cycle, 20 kW / 173 Nm Tool holder: SK 40 Tool interface Type: SK 40 Magazine positions: 38 slots Chip-to-chip time: approx. 6 s Max. tool length: 300 mm Tool diameter with adjacent slots occupied: Ø 80 mm Tool diameter without adjacent slots occupied: Ø 125 mm Max. tool weight: 8 kg Max. magazine loading: 152 kg Swivel rotary table Clamping surface: Ø 650 x 540 mm Swivel range: +91° / -139° C-axis drive type: worm gear A-axis swivel speed: 25 rpm C-axis rotational speed: 30 rpm Table load, one-side drive: 600 kg Accuracy according to ISO 230-2 Deviation (A in X-Y-Z axes): ≤ 0.006 mm Cooling system (IKZ) Standard tank capacity: 122 l Coolant tank capacity: max. 570 l at 40 bar Pressure: max. 40 bar Delivery rate: 11/27 l/min Power connection (IKZ): 400 V / 50/60 Hz Power consumption (IKZ): up to 20 kVA Filter: pre-filter, paper band filter Operating pressure Hydraulic pressure: 120 bar Compressed air: 6 bar Lubrication system: Minimum quantity grease lubrication MACHINE DETAILS Control operating hours: 20,178 h Machine operating hours: 19,094 h Spindle hours: 11,832 h Weight: approx. 9.5 t Power connection Voltage: 400 V / 50/60 Hz Power demand: up to 30 kVA EQUIPMENT – BLUM touch probe – BLUM tool laser measurement – Pull-out chip drawer – Swivel rotary table – Chip flushing gun – Emulsion mist extractor – Scraper-type chip conveyor – Blow-off device – Air blast through spindle center – Manual cabin door – Manual cabin roof – Polycarbonate safety windows – Heidenhain electronic thermal compensation – Heidenhain electronic handwheel

Gamybos metai: 1990, Sąlyga: paruoštas naudoti (naudotas), A CNC universal milling and drilling center from SHW is available. Travel distances X/Y/Z: 6000mm/2100mm/1500mm, swivel angle of milling head: 180°, rapid traverse X/Y/Z: 8 m/min, spindle speed: 4500 rpm, spindle power: 31.5 kW, machine dimensions (X/Y/Z): approx. 11000mm/9000mm/6000mm, weight: approx. 44,000 kg. Documentation is available. An on-site inspection is possible. Lhsdpfx Afsuh Azis Ijb

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, DOOSAN PUMA 400LMA FANUC 32i (Metai 2011) PAGRINDINĖS SPECIFIKACIJOS: - CNC FANUC 32i su 10,4” LCD spalvotu ekranu ir Manual Guide - Suvystymo skersmuo virš lovos: 770 mm - Suvystymo skersmuo virš skersinio stalo: 590 mm - Maks. tekinimo skersmuo: 560 mm - Maks. tekinimo ilgis: 2 064 mm - X/Z ašių eiga: 357 mm / 2 155 mm - Strypo pralaidumas: 90 mm - Hidraulinio griebtuvo skersmuo: 400 mm - Velenas: 22 kW / 3 000 aps/min (ASA A2-8) - BMT 75P revolveris su 12 pozicijų ir gyvomis priemonėmis - Gyvų įrankių galia: 7,5 kW, 3 000 aps/min Lhjdpfxeyb Sqpe Af Iob ĮTRAUKTA ĮRANGA: - S-HS-12 hidraulinis griebtuvas, 305 mm skersmens, su žandikaulių rinkiniu - C ašis 360º (0,001º) - Automatinis įrankių matuoklis - Programuojamas užpakalinis centras - Aukšto slėgio pompa 14,6 bar - Drožlių transporteris - Hidraulinės atramos paruošimas (bazė, logika, hidraulika) - SMW SLU X-4-ZS hidraulinė atrama, 30–245 mm skersmens - Pilnas įrankių laikiklių komplektas: 4 vidiniai, 4 išoriniai, 4 rotaciniai (2 kampiniai, 2 tiesūs)* - Dokumentacija ir vadovai BŪKLĖ: Staklės puikios būklės, įjungtos, galima apžiūra Barselonoje

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, pjovimo skersmuo: 560 mm, DOOSAN PUMA 400 LMB FANUC 21i valdymo sistema Maksimalus tekinimo skersmuo: 560 mm Maksimalus darbinis ilgis: 2000 mm Maksimalus sūpavimas virš staklių: 770 mm Ljdpfx Afjyciq Ae Iohb Sūpavimas virš skersinio: 590 mm X, Z ir C ašys – 360 laipsnių, 0,001 laipsnių tikslumas Hidraulinis griebtuvas, 380 mm skersmens Hidraulinis atramas (SMW blokas) Veleno skylės skersmuo: 132 mm 12 padėčių revolverinė galva Drožlių transporteris Quill skersmuo: 120 mm Morsės kūgis: 6 Quill eiga: 120 mm Maitinimo poreikis: 60 kVA Užimamas plotas: 4220 x 2180 mm Svoris: 10 t