Kietumo matavimo prietaisas, kietumomatis

Reicherter | Wolpert Briro VA II | Dia Testor 2n

Būklė: naudotas, Technical details: x-axis: 120 mm z-axis: 610 mm diameter: - mm measuring range Y-axis (height): 0 - 610 mm weight: 19 kg interfaces: 2x RS-232C, 2x USB-A/B total height: 950 mm measuring system resolution: 0.0001 mm power consumption: 43 watts installation space (W x D x H): 320 x 330 x 950 mm TWO-COORDINATE HEIGHT GAUGE Iedewa A Hmopfx Alreau with two probe holders: 0–872 mm manual adjustment speed air bearing interfaces: 2x RS232C and 2x USB (A+B) setting standard 25 mm

Būklė: geras (naudotas), Gamybos metai: 2006, 1 used 4-axis horizontal machining center Manufacturer: Haas Model: EC 1600 Year of manufacture: 2006 Travel distances X-axis: 1626 mm Y-axis: 1270 mm Z-axis: 813 mm Spindle centerline to table: 304 mm Spindle SK 50 Max. rated power: 22.4 kW Max. speed: 7,500 rpm Max. torque: 460.0 Nm at 700 rpm Table dimensions Length: 1626 mm Width: 914 mm Width of T-slots: 16.00 mm T-slot center distance: 125 mm Number of standard T-slots: 7 Max. load capacity on table (evenly distributed): 4,536 kg Integrated 4th axis (B axis) Table: 1626 mm x 813 mm Clamping surface diameter: 762 mm Adjustment range: 360° Max. swing diameter of workpiece: 1,270 mm Table load: 4,536.0 kg Max. rated power: 3.7 kW Rotational torque (continuous): 2,712 Nm Backlash: 30 arc-sec Iaodpfov N Di Ajx Alrou Transmission ratio: 500:1 Braking torque: 5,423 Nm Minimum resolution: 0.001° Indexing accuracy: ±30 arc-sec Repeatability: 15 arc-sec Rapid traverse on B: 36°/sec Max. feed rate for machining (B axis): 36°/sec Spindle centerline to table: 146 mm Max. feed rate for machining in X, Y, Z axis: 12.7 m/min Rapid traverse on X: 15.2 m/min Rapid traverse on Y: 15.2 m/min Rapid traverse on Z: 15.2 m/min Axis motors Tool changer: 30 stations Max. tool diameter (full): 102 mm Max. tool diameter (adjacent pockets empty): 254 mm Max. tool length: 508 mm Max. tool weight: 13.6 kg Tool-to-tool (average): 8.00 s Chip-to-chip (average): 12.60 s General information Coolant tank capacity: 360 L Dimensions Domestic pallet: 488 cm x 366 cm x 346 cm Export crate: 488 cm x 366 cm x 348 cm Weight: 13,608.0 kg

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2000, veikimo valandos: 25 000 h, X ašies eiga: 10 300 mm, Y ašies eiga: 2 000 mm, Z ašies eigos atstumas: 1 800 mm, X ašies padavimo greitis: 10 m/min, Y ašies padavimo greitis: 10 m/min, padavimo greitis Z ašis: 10 m/min, frezos galvos padėtis: 2.5 x 2.5 °, veleno greitis (maks.): 3 000 aps./min, veleno greitis (min.): 60 aps./min, stalo plotis: 3 300 mm, stalo ilgis: 12 000 mm, tvirtinimo skersmuo: 50 mm, bendras aukštis: 48 750 mm, bendras plotis: 100 000 mm, bendras ilgis: 212 000 mm, bendras svoris: 100 000 kg, Duplexfräsen bestehen aus zwei Maschinen, die einander gegenüber angeordnet sind und entweder separat oder als eine Einheit betrieben werden können. Das Werkstück kann mit zwei Spindeln gleichzeitig bearbeitet werden. Produktionssteigerung von bis zu 50 % im Vergleich zu konventionellen Lösungen, also Einzel-Fräsmaschinen Steigerung der Teilegenauigkeit, da die Bearbeitung des Werkstücks in den meisten Fällen in nur einer Aufspannung erfolgen kann Bedienung durch nur einen einzigen Maschinenführer möglich Reduzierter Platz- und Investitionsbedarf im Vergleich zu zwei Einzelmaschinen Schnelle Amortisation durch hohe Produktivität Duplex-Lösungen ermöglichen unterschiedliche Konfigurationen: einzelner Arbeitsbereich oder Pendelbearbeitung Geeignet zur Bearbeitung von Baggerarmen/-auslegern folgender Hersteller: CAT, Caterpillar, Komatsu, Hitachi, Hyundai, Doosan, Case, Bobcat, JCB, Kobelco, Liebherr, Kubota, Takeuchi, Volvo Technische Daten: X-Achse: 10.300 mm Y-Achse: 2.000 mm Z-Achse: 1.800 mm Tischlänge: 12.000 mm Tischbreite: 3.300 mm Tischbelastung: 100.000 kg Spindelleistung: 22/30 kW Spindeldrehzahlen: 60 – 3.000 U/min Spindelaufnahme: 50 ISO/BT/MK Vorschub X-Achse: 10.000 mm/min Iasdpfx Aorx Rxtolrju Vorschub Y-Achse: 10.000 mm/min Vorschub Z-Achse: 10.000 mm/min Fräskopf mit automatischer Indexierung: 2,5 x 2,5° Betriebsstunden: 25.000 h Länge: 21.200 mm Breite: 10.000 mm Höhe: 4.875 mm Gewicht: 100.000 kg

Būklė: labai geros būklės (naudotas), X ašies eiga: 10 000 mm, Y ašies eiga: 2 100 mm, Z ašies eigos atstumas: 1 300 mm, greitas poslinkis X ašimi: 30 m/min, greitas poslinkis Y ašis: 30 m/min, greitasis eiga Z ašyje: 30 m/min, X ašies padavimo greitis: 30 m/min, Y ašies padavimo greitis: 30 m/min, padavimo greitis Z ašis: 30 m/min, veleno greitis (maks.): 6 000 aps./min, veleno greitis (min.): 36 aps./min, pasukimo diapazonas: 360 °, SHW PowerSpeed 5 Travel Distances • X-axis (bed): 10,000 mm • Y-axis (vertical): 2,100 mm • Z-axis (spindle horizontal): 1,300 mm Control System • CNC Control: Heidenhain iTNC 530 Feed Rate • X, Y, and Z axes: 2 – 30,000 mm/min • Acceleration: 3.5 m/s² Universal Milling Head in Orthogonal Design • Swivel Range Head Mount: 360 x 1 degree • Swivel Range Milling Head: 180 x 1 degree • Tool Holder: SK 50 DIN 69871 • Speed Range: 36 – 4,000 rpm o Intermittently 36 – 6,000 rpm Automatic Tool Changer • Tool magazine for 48 tools Coolant System • Tank Capacity: 500 l About MBM MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is on tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls, and control system upgrades. Services: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control system modernization Ijdpjxgq Ayjfx Alrjau ----- Used machine – used milling machine – used travelling column milling machine – orthogonal milling head – metalworking – tool milling machine – milling head – SHW machine – SHW spare parts – used milling machine – used cnc milling machine – used drilling-milling machine – used metal milling machine – used metal mill – used metal milling machine – used cnc mill – cnc milling machines – cnc milling – milling machine – large-part machining – cnc large-part machining – milling – shw – PS5 – PS 5 – Powerspeed – SHW PSZ 5 – SHW Powerspeed – SHW Powerspeed 5 – PSZ 5 – PSZ 5 – Heidenhain – MBM milling machine – MBM machine – column type milling machine

Būklė: geras (naudotas), Gamybos metai: 1995, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 10 000 mm, Y ašies eiga: 1 500 mm, Z ašies eigos atstumas: 3 000 mm, - CNC control Heidenhain TNC 415B - Controlled 2-axis NC milling head 2.5° - Coolant system Isdpfx Aowrzkzjlroau The machine is sold without the clamping plate table. Accessories: Approx. 20 pcs. tool holders DIN2080 with pull studs DIN69872 Various spare parts such as bevel gears for the milling head and a ball screw for the X-axis. Technical data / details: X-axis travel (longitudinal): 10,000 mm Y-axis travel (cross): 1,500 mm Z-axis travel (vertical): 3,000 mm Spindle taper: SK50 Spindle speed range (2-step): 35–3,000 rpm Feed rate: 6–10,000 mm/min Rapid traverse X, Y, Z: 10, 15, 10 m/min Main drive motor capacity (100% duty cycle): 37 kW Approx. machine weight: 39,300 kg Technical data, accessories and description of the machine are non-binding.

Būklė: geras (naudotas), Gamybos metai: 2003, tekėjimo ilgis: 1 505 mm, Turning-milling center GILDEMEISTER GMX 400 linear Year of manufacture: 2003 Control: Sinumerik Power line Technical data: Main spindle drive power ISM 90: 36/45 kW (100/40%) Main spindle speed: Main spindle torque: Iaodowzbq Tspfx Alrsu Bar capacity: 90 mm Number of tool magazine positions: 120 pcs. Tool interface milling spindle: HSK 63 Counter spindle drive power ISM 90: 36/45 kW (100/40%) Counter spindle speed: Counter spindle torque: Bar capacity: 90 mm B-axis / Milling spindle: Drive power: Speed: Torque: Tool interface: HSK 63 Lower turret: X-axis: Z-axis: Speed driven tools: Number of turret stations: 12 pcs. Tool interface: VDI 40 Accessories: - Chip conveyor - High-pressure system 20 bar - Preparation for 3D measuring probe - Tailstock function on counter spindle - Automatic sliding doors

Būklė: naudotas, Gamybos metai: 2013, mašinos/transporto priemonės numeris: 5279, X ašies eiga: 8 000 mm, Y ašies eiga: 1 600 mm, Z ašies eigos atstumas: 1 300 mm, veleno greitis (maks.): 4 000 aps./min, veleno greitis (min.): 22 aps./min, Year of manufacture: 2013 Control system: SIEMENS Sinumerik 840D pl Tool holder: HSK 100-A TRAVEL PATHS Horizontal, longitudinal (X-axis): 8,000 mm Spindle stock slide, vertical (Y-axis): 1,600 mm Spindle stock, horizontal traverse (Z-axis): 1,300 mm RADIO MEASURING PROBE: m&h HSK 100 SIEMENS HANDHELD OPERATOR PANEL B-MPI RIDING OPERATOR PLATFORM 3-SIDED SPLASH AND CHIP GUARD CHIP CONVEYOR CLAMPING PLATE Dimensions: Length: 10,000 mm, Width: 2,500 mm WASHDOWN GUN IN THE WORK AREA REINFORCED COOLANT SYSTEM Pump capacity: 32 l/min at max. 20 bar Coolant tank: 2,000 L 2-CHANNEL COLLISION MONITORING SYSTEM 2 monitoring channels: – 1. Collision monitoring orthogonal milling head (Channel 1) – 2. Collision monitoring fork head (Channel 2) Iaedpfju Sppwsx Alrsu PENDULUM MACHINING IN 3 WORK AREAS MULTI-AXIS INTERPOLATION FOR FREEFORM SURFACES (TRAORI, 3D tool radius correction, spline interpolation) ROTATED AXIS COORDINATE SYSTEM 2 PICK-UP STATIONS For fork head, arranged on clamping plate Storage spaces: 10 Max. tool weight: 12.5 kg Max. tool length: 200 mm Max. tool diameter: 63 mm Max. tool diameter with free neighbouring slot: 250 mm Tool holder: HSK 6 AUTOMATIC TOOL CHANGER Number of tools in chain magazine: 48 Max. tool diameter with full magazine: 125 mm Max. tool diameter with free neighbouring slots: 250 mm Max. tool length: 500 mm Max. tool weight: 25 kg Max. tool load moment: 40 Nm Tool holder: HSK 100-A HEAD CHANGE MAGAZINE 1 FORK HEAD WITH HIGH-FREQUENCY SPINDLE AUTOMATIC FORK HEAD WITH INTEGRATED HIGH-FREQUENCY SPINDLE – High-frequency milling spindle: – Built-in high-frequency spindle – Tool holder: HSK – A 63 DIN 69893 – Main drive power: 20 kW at 100% duty cycle or 25 kW at 40% duty cycle – Speed range up to 20,000 rpm – Motor spindle bearings with lifetime grease lubrication – Sealing air protection – Torque: 40 Nm at 100% duty cycle, 50 Nm at 40% duty cycle – Automatic tool clamping – Power transmission according to speed/power diagram GMN HCS 170 – Technical data per data sheet E 745.1467.00 UNIVERSAL MILLING HEAD, ORTHOGONAL DESIGN – Liquid-cooled milling head – Cast construction GGG 60 – Milling head swivelable 180 x 1 degree, automatic – The resulting positions can be not only approached but also programmed and processed by CNC control – Repeatability at the spindle nose ±0.002 mm, indexing accuracy ±3 arcseconds – Tool holder: HSK 100-A – Milling spindle equipped with hydromechanical quick tool clamping – Tool retention force: 45 kN – Internal coolant supply, Form A-D – External coolant supply via shower ring – Speed range: 22–4,000 rpm MAIN DRIVE Via a frequency-controlled, liquid-cooled AC motor with – 32 kW drive power at 100% duty cycle; 46 kW at 40% duty cycle – Direct power transmission WITHOUT gearbox, thus no heat generation or wear of a gearbox – 637 Nm torque at 100% duty cycle, 875 Nm at 40% duty cycle

Būklė: naudotas, Gamybos metai: 2006, Funkcionalumas: nepatikrintas, Siūlome jums Parkson prekės ženklo sukamąjį stalą. Modelis: PAR-251 R Iedpfx Aextu Efslrsau Sukamojo stalo skersmuo yra beveik 250 mm. Susisiekite su mumis dėl neįpareigojančio pasiūlymo.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2000, Parduodami du Hermle C 800 V apdirbimo centrai. Hermle C 800 V Metai: 2000 Valdymas: Heidenhain TNC 430 Techniniai duomenys: X ašis: 800 mm Y ašis: 600 mm Z ašis: 500 mm Stalo tvirtinimo paviršius: 1000 x 560 mm Maks. stalo apkrova: 1000 kg Isdpfoylkzzsx Alrjau Atstumas tarp galvutės ir stalo: 100–500 mm Veleno apsisukimų dažnis: 8000 aps./min. SK40 30 įrankių keitimo vietų

Gamybos metai: 1999, būklė: naudotas, Frequency: 230 Hz Workpiece length: 150 mm Workpiece width: 150 mm Maximum temperature: ° Muffle size (length): Muffle size (width): Muffle size (depth): mm Total power requirement: 210 kW Machine weight approx. 5 t Space requirement approx. m FRITZ DÜSSELDORF FREIBURG CNC-controlled HF Hardening and Tempering System (Indexing Table Machine) Model: SM-710.8x2.2 Year of manufacture: 1999 This hardening system is used for inductive tempering and surface hardening of shaft-shaped workpieces approx. 40 mm Ø x approx. 150 mm high, consisting of: 1 hardening unit with HF transistor converter FCM 115 kW, 170 – 230 kHz Twin inductor, vertical stroke approx. 400 mm, horizontally adjustable, current inductor diameter approx. 60 mm, with quenching spray and pneumatic twin tailstock as a rotating workpiece counter support 1 tempering station with transistor converter FCI-30/50 kW, 10-25 Hz Twin inductor, vertical stroke approx. 400 mm, horizontally adjustable, current inductor diameter approx. 60 mm, with quenching spray and pneumatic twin tailstock as a rotating workpiece counter support, in combination with: double re-spray/cooling station and hardness testing station, make EDDYLINER PL by IGB, with pneumatic workpiece lifting device, testing performed with multi-frequency Isdpfxot Hw Ddj Alreau Rotary indexing table with 2x workpiece holders, powered and 8-position selectable for the respective processing station; workpieces are loaded and unloaded automatically by a gantry loader, make FELSOMAT Type FAZ 300; raw and finished parts placed on stack pallets for further workpiece transport. Electrical check whether a workpiece is present. 1 control cabinet with SIEMENS CNC control Type 840 D attached to the machine, with water-cooled main converter as well as separate converters for hardening and tempering stations, each with ampere/volt/kW displays, separate power cabinet and cooling water/quenching agent recooling system Type RA 200.350 with intermediate tank Total drive approx. 210 kVA – 400 V – 50 Hz Total weight approx. 5,000 kg Condition: good – as typical for hardening machines, not in demonstration-ready condition (no power connection) Delivery: ex stock – as inspected Payment: strictly net – after receipt of invoice Should you have any further questions, please do not hesitate to contact us. If you require other used machines, feel free to inquire with us.