Stalo pjūklas

Rapid PK 100

Sąlyga: geras (naudotas), Under-table pull circular saw, cross-cut saw, pull saw, chop saw, panel saw, table saw, circular saw, precision circular saw - Manufacturer: Rapid, table saw saw unit: 45° tiltable - Model: PK 100 Kodpfxsm Hd Sfe Af Isdg - Motor power: 2.5 kW / 2850 rpm - Saw blade: Ø 250 mm (max. Ø 300 mm) - Cutting height: 55 mm (max. approx. 100 mm) - Cutting width: 350 mm - Mitre cut: up to 45° - Dimensions: 1000/840/H1240 mm - Weight: 162 kg

Sąlyga: geras (naudotas), Gamybos metai: 2001, šlifavimo ilgis: 650 mm, šlifavimo plotis: 525 mm, bendras aukštis: 350 mm, stalo ilgis: 600 mm, stalo plotis: 350 mm, Manufacturer: Geibel & Hotz Model: FS 635-Z SA Control: Digital readout Year of manufacture: 2001 Magnetic table 600 x 350 mm Enclosed housing for CE compliance Vertical automatic feed (SA) Automatic lubrication Coolant tank Specifications Metric / US Standard X-axis travel: 650 mm Y-axis travel: 525 mm Z-axis travel: 350 mm Table length: 600 mm Table width: 350 mm Table load capacity: 400 kg X-axis feed rate: 35,000 mm/min Z-axis feed rate: 1,000 mm/min Grinding wheel dimensions: 300 x 50 x 76.2 mm Power: 3.7 kW Speed: 2,800 rpm Dimensions (approximate) Length: 3,200 mm Width: 2,000 mm Ksdpfjvdal Aex Af Ijdg Height: 2,870 mm Weight: 2,300 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. As such, this does not constitute representation or contractual terms. We recommend verifying all critical details.

Sąlyga: naudotas, Underfloor cross-cut saw, crosscut saw, pull saw, chop saw, panel saw, table saw, circular saw, precision circular saw -Manufacturer: Rapid, table saw unit: 45° tiltable -Type: PK 100 -Motor power: 2.5 kW / 2850 rpm -Saw blade: Ø 175 mm (max. Ø 300 mm) -Cutting height: 37 mm with saw blade Ø 175 mm (max. approx. 100 mm) Kjdjm Sk H Iepfx Af Ijdg -Cutting width: 350 mm -Mitre cut: up to 45° -Dimensions: 940/860/H1390 mm -Weight: 162 kg

Sąlyga: geras (naudotas), Sub-floor pull circular saw, cross-cut saw, pull saw, mitre saw, panel saw, table circular saw, circular saw, precision circular saw - Manufacturer: Rapid, Table circular saw saw unit: tiltable 45° Ksdpfom Sk Hyex Af Ijdg - Model: Pk 100 - Motor power: 2.5 kW / 2850 rpm - Saw blade: Ø 250 mm (max. Ø 300 mm) - Cutting height: 70 mm (max. approx. 100 mm) - Cutting width: 345 mm - Mitre cut: up to 45° - Chip extraction: with shut-off slide valve for connection to central extraction system - Dimensions: 1020/850/H1300 mm - Weight: 188 kg

Gamybos metai: 1999, Sąlyga: labai geros būklės (naudotas), Manufacturer: VANGROENWEGHE Model/Type: M-300 Year of Manufacture: 1999 Machine Category: Through-Feed Sander Location: Gorzów Wlkp. Delivery Terms: Self-collection Delivery Costs: Borne by the Customer Commissioning Type: To be agreed Description: Notes: Manufacturer: VANGROENWEGHE Model/Type: TYPE F-300-COMBI/CE Year of Manufacture: 1998 Machine Category: Through-Feed Sander Location: Gorzów Wlkp. Delivery Terms: Delivery costs borne by the customer Commissioning Type: To be agreed Through-feed Sander VG TYPE F-300-COMBI-CE / 1998 Kdjdpfxod Nmdke Af Isg High-performance Combi unit machine Contact roller and pad sanding Pneumatic oscillation and mechanical belt tensioning Motors: 7.5 + 1 HP / 380 V Abrasive belt dimensions: 300 x 1,900 mm

Sąlyga: naudotas, Gamybos metai: 1995, veikimo valandos: 1 589 h, mašinos/transporto priemonės numeris: 558B, Įranga: visų varančiųjų ratų pavara, - Beautiful Liebherr wheel loader in truly excellent condition, direct from the military (Swiss Army). Well maintained and serviced. - The 508 is a really solidly built wheel loader, true military-grade quality. - No oil leaks – it does NOT leave oil stains, almost like new. - The cab is fully glazed, providing excellent all-round visibility! - The Liebherr L508 is equipped with: quick coupler, 0.8 m³ bucket, pallet forks with side shift, additional hydraulic connections for attachments, all-wheel drive, 40° articulated steering – highly manoeuvrable with a small turning radius. - Tyre size 12.5 R 20 off-road profile; tyres are foam-filled (cannot run flat); snow chains included, hydrostatic drive, max speed 25 km/h, engine displacement 2732 cm³, 4-cylinder inline Deutz BF4L1011 T turbo, 24-volt electrical system. Kedpeqx S Alsfx Af Isdg - TÜV certificate can be renewed upon request and at additional cost!!! - All my vehicles are displayed on my homepage. - Why run all over from Flensburg to Berchtesgaden to see different vehicles when you’ll find over 150 models here, including: - Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-model, Mowag, Daimler-Benz, etc., most also available with TÜV certificate. - Also available: an unimaginable selection of spare parts and accessories. - Why settle for less? - Just give me a call at 0049 (0)2248 Greetings Your Philipp from Hanfbachtal

Sąlyga: naujas, Format circular saw ALTENDORF WA 6 - Exhibition machine - manual height adjustment, double roller carriage, scoring unit, tiltable, extension table, mitre fence, automatic brake, lowerable below table height ----- Technical data ----- Tilting range: 0 - 45°, cutting length: 2,500 mm, cutting width at rip fence: 1,000 mm, max. cutting height: 100 mm, max. saw blade Ø: 315 mm, tilting range of mitre fence: up to 49°, speeds: 4,200 rpm, motor power main motor: 5.5 HP / 4.0 kW, Kdsdpfx Aou R Sx Eef Ieg motor power scoring motor: 0.5 HP / 0.37 kW, table height: 910 mm, extraction port Ø: each 1 x 100 / 50 mm, weight: 450 kg - new exhibition machine -

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1984, Mašina modernizuota 2015 m. Maks. gręžimo pajėgumas: 20 mm Įrankio kūgis: 2 MK Sukimosi greitis: 355/710/1400/2800 aps./min Veleno eiga: 100 mm Veleno išsikišimas: 210 mm Kjdpsgqukfjfx Af Iedg Veleno galvutės poslinkis: 250 mm Maks. atstumas velenas-stalas: 445 mm Stalo paviršius: 340x280 mm Prisijungimo galia: 1,1 kW Svoris: 0,165 t Reikalinga vieta IxPxA: 0,6 x 0,5 x 1,3 m

Sąlyga: naudotas, Vollmer CAB 42 U juostinių pjūklų ašmenų galandinimo staklės -Juostiniams pjūklams: -Geležtės plotis 60–210 mm -Geležtės ilgis 6000–11000 mm -Dantukų žingsnis 6–60 mm -Dantukų aukštis 4–25 mm -Pjovimo kampas -5 iki +35° -Darbo greitis 30 ir 45 dantukai/min -su centriniu aukščio reguliavimu Ksdpsxxn Tajfx Af Iedg -Padavimas iš dešinės į kairę -su juostinių pjūklų geležčių tvirtinimo įrenginiu

Sąlyga: geras (naudotas), Gamybos metai: 1999, veikimo valandos: 16 000 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 650341, Year 1999 with Fanuc 18 TB – 3 axes XZB Marposs E30/E20 Country of manufacture: CH Voltage: 400V/50Hz/3ph Dimensions: 410 x 220 x 190 cm Net machine weight: 5000 kg TECHNICAL SPECIFICATIONS CNC: Fanuc 18TB Intermediate section Fixed intermediate section: Grinding head R Swiveling section with manual indexing 2.5°: R / RS / UR / URS -210° to +30° Swiveling section with automatic indexing 2.5°: R / RS / UR / URS -210° to +30° B axis, resolution 0.1'': R / RS / UR / URS -210° to +30° Standard workhead Swivel range: -10° (+100° Spindle speed (continuous): 6 – 600 min⁻¹ Internal taper mount: MT5 Reduction sleeve: MT5/MT4 Short taper external mount: DIN 55026 / Size 5 Admissible load: 160 Nm Guaranteed roundness for chucking operations Standard: 0.5 µm Option: 0.2 µm Workpiece weight between centers: 150 kg Tailstock Taper mount: MT4 Quill stroke: 50 mm / 2° Option: micrometric movement with correction (Ø +/- 150 µm) Grinding wheel data Diameter 300 mm: 27 m/s Diameter 400 mm: 35 m/s Diameter 500 mm: 45 m/s UR grinding head Power: 9.2 kW / 12.5 HP Left wheel mount, max.: Ø 500 x 80 mm Additional right wheel, max.: Ø 400 x 63 mm Internal grinding device: HJN 828 spindle Lower table (Z axis) Kdsdpfx Asw T Tb Hjf Isg Distance between centers: 1000 mm Max travel: 1150 mm Max speed: 15 m/min Max resolution: 0.1 µm Upper table Distance between centers: 1000 mm, swiveling 0 to 9° Grinding slide (X axis) Max travel: 320 mm Max speed: 7.5 m/min Max resolution: 0.1 µm Pneumatics Minimum connection: 6 bar Air consumption: approx. 0.6 m³/h Coolant Max pressure connection: 3 bar Required space (version 1000): 3600 x 2000 mm All technical information is provided without obligation and subject to errors and omissions.