Suoliukas gręžimo staklės

WMW Saalfeld BT 12

Sąlyga: naudotas, Gamybos metai: 2014, Technical details: Swing diameter over bed: 356 mm Swing diameter over support: 220 mm Turning length: 1000 mm Centre height: 180 mm Lodpfxow D Dcqo Abrjhc Centre distance: 1000 mm Spindle bore: 38 mm Speed range: 45 - 1800 rpm Longitudinal feeds: 0.043 - 0.653 mm/rev, 42 steps Tailstock quill taper: MT3 Tailstock quill travel: 95 mm Total power requirement: 4 kW Machine weight approx.: 0.85 t Machine dimensions (LxWxH) approx.: 1.92 x 0.8 x 1.49 m including display unit Various accessories

Gamybos metai: 2023, veikimo valandos: 0 h, Sąlyga: naujas, HB12X6 (optional 12X3) is suitable for bending your reinforcing steel meshes into the desired shape. Product information: - Motor power: 7.5 kW (5.5 kW) - Voltage: 380 V - Length: 6400 mm (3400 mm) - Width: 1000 mm - Height: 1090 mm - Hydraulic oil capacity: 36 l Ledpfx Absm Tmddjrohc - 6 m (3 m optional) - 3 stops - Bending angle: 45°-90°-135° - Weight: 1250 kg (710 kg) Shipping: Europe-wide (self-collection also possible) If you have any questions, we are happy to assist you!

Sąlyga: naujas, Variable speed, ISO 40. Power-driven cross table on all axes. 3-axis digital readout included. Base with chip tray. Cooling system. LED lamp. Mechanical speed indicator. Variable speed, power-driven axes with rapid traverse. Guideway lubrication system with manual pump. Milling capacity with insert cutter: 100 mm. Milling capacity: 35 mm. Drilling capacity in cast iron (pre-drill): 60 mm. Maximum drilling capacity in steel (S235JR, pre-drilled): 24 mm. Spindle taper: ISO40 DIN2080. Quill diameter: 86 mm. Spindle travel: 120 mm. Head tilt: +/- 45°. Vertical head rotation: +/- 90°. Head body rotation: +/- 180°. Ljdpsh Im H Sjfx Abrohc Vertical spindle speeds: (2) 60 – 500 | 500 – 3600 rpm. Motor: 400 V, 50 Hz, 2.25 kW. Distance between spindle nose and table: 45 – 395 mm. Distance between spindle axis and column: 215 – 450 mm. Table size: 1246 x 230 mm. Longitudinal table travel: 850 mm. Cross table travel: 310 mm. Max load capacity: 400 kg. Dimensions: 1680 x 1500 x 2100 h mm. Net weight: 1,000 kg.

Sąlyga: visiškai atnaujintas (naudotas), SCHLATTER MG24 Welded Mesh Production Line Completely Refurbished WORKING RANGE Panel width: max. 2,500 mm Weft wire length: min. 900 mm Weft wire length with QF5 distributor: min. 300 – 1,600 mm Maximum spacing between outer warp wires: 2,400 mm Mesh length (warp wire length): max. 2,500 – 6,000 mm Minimum spacing between warp wires: 100 mm Spacing between weft wires: 25 – 250 mm Adjustable by cutting device (0-1) Warp wire diameter: 4.0 – 12.0 mm Weft wire diameter: 4.0 – 12.0 mm Number of warp wires: max. 24 MG 24.1/8C MESH WELDING MACHINE, Standard Equipment Includes: - 1 Machine base frame - 1 Upper support for press reception, continuously adjustable via handwheel - 1 Magnet holders with holding magnets and monitoring of weft wires - 1 Row of pneumatic solenoid valves for press actuation - 1 Air and water system - 2 Pneumatic rotary drives with oil damping - Static torque with 5 bar compressed air: 480 Nm - Continuously adjustable front from 25 – 250 mm, adjustable by cutting device (0-1) - 1 Advance carriage with panel lifting device - 1 Set of tools for machine adjustment WELDING SECTION Includes: - 8 C-type transformers - Rated power per transformer: 100 kVA - Secondary open-circuit voltage: 7.1 V - Secondary rated current: 14 kA - 8 ES 130 thyristor contactors - 12 Welding presses: 5.0 kN - 12 Warp wire current bridges for 50–100 mm warp wire spacing - 12 Warp wire current bridges for 100 mm stepped warp wire spacing - 10 Warp wire current bridges for 100–150 mm warp wire spacing - 8 Warp wire current bridges for 150 mm stepped warp wire spacing - 6 Warp wire current bridges for 150–200 mm warp wire spacing - 6 Warp wire current bridges for 200 mm stepped warp wire spacing - 24 Lower copper electrode holders with standard angular electrodes, each with a water-cooled current cable, width: 58 mm - 24 Wire holding clamps Panel width: max. 2,500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 – 1,600 mm Spacing between extreme warp wires: max. 2,400 mm Mesh length (warp wire length): max. 2,500 – 6,000 mm Spacing between warp wires: min. 100 mm Weft wire spacing: 25–250 mm Warp wire diameter: 4.0 – 12.0 mm Weft wire diameter: 4.0 – 12.0 mm Number of warp wires: max. 24 Ljdpfx Aowu Tu Dsbrshc

Sąlyga: naudotas, Gamybos metai: 2003, x-travel: 930 mm y-travel: 400 mm z-travel: 406 mm Spindle speed: 9–6750 rpm Table: 1370 x 254 mm Quill stroke: 127 mm Quill feed: (3) 0.04; 0.08; 0.15 mm/rev Drilling capacity in steel: 32 mm Feed range: 19–890 (x) mm/min Spindle taper: SK 40 Column overhang: 200–680 mm Total power requirement: 4 kVA Machine weight approx.: 1.15 t Space requirement approx.: 1.5 x 1.45 x 2.2 m Product information "Multifunction Milling Machine Optimill MF 4 Vario – Tool Milling Machine with Variable Speed" Optimill MF 4 Vario – Multifunctional drilling and milling machines for professional use. Electronically infinitely variable drive with frequency inverter "Made in Germany" and digital 3-axis position indicator DPA 21. Heavy, robust construction made from high-quality Meehanite cast iron. High concentricity accuracy due to tapered roller bearings, less than 0.01 mm measured in the quill. Automatic quill feed. Forward/reverse rotation for thread cutting. X and Y axes with adjustable dovetail guideways. Coolant device. Y-axis with flat guideway. Large Y-axis travel of 400 mm. Motorized table height adjustment with rapid traverse (Z-axis). Equipment details: - Frequency inverter quality Made in EU - Drilling/Milling head tilt ±45˚ - Overhang 200–680 mm - Spindle speeds - Infinitely variable speed regulation - Particularly wide speed range - Drilling depth stop, adjustable with millimetre scale, front-reading - Safety screen, height adjustable and generously sized - Cross table, solid, generously sized, precisely surface machined - Motorized table height adjustment Z-axis - Adjustable end stops - OPTI control panel, integrated switch panel - Integrated digital position display DPA 21 with speed display - X-axis: motorized table feed, stepless speed regulation, rapid traverse, forward/reverse rotation Technical data: Product length: 1,500 mm Product width/depth: 1,450 mm Product height: 2,200 mm Net weight: 1,150 kg Total connected load: 4 kW Electrical voltage: 400 V Phase(s): 3 Ph AC power supply, supply frequency: 50 Hz Maximum face mill size: 100 mm Maximum end mill size: 20 mm Vertical spindle overhang: 200–680 mm Vertical spindle taper: ISO 40 DIN 2080 Vertical spindle speed range Number of speed ranges vertical spindle: 8 Vertical spindle speed control: electronically adjustable Horizontal milling table length: 1,370 mm Horizontal milling table width: 254 mm Distance vertical spindle to horizontal milling table, min.: 40 mm Distance vertical spindle to horizontal milling table, max.: 446 mm Horizontal table T-slot size: 16 mm Horizontal table T-slots: number 3 Horizontal table T-slot spacing: 63 mm Horizontal table max. load: 275 kg Vertical spindle drive motor (normal operation): 3 kW Coolant pump(s) drive motor: 100 W X-axis travel (manual): 930 mm Y-axis travel (manual): 400 mm Z-axis travel (manual): 406 mm X-axis travel (automatic): 850 mm Z-axis travel (automatic): 350 mm Lhsdpfx Abst U Rm Ijrjc Drilling capacity steel (S235JR): 32 mm Permanent drilling capacity steel (S235JR): 28 mm Vertical spindle swing range, milling head Z-X plane: +/- 45 degrees Vertical spindle quill stroke: 127 mm Vertical spindle quill feed: 0.04/0.08/0.15 mm/rev

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, We offer for sale a complete multi-point automatic steel wire welding line by SCHLATTER. We have three fully operational production lines available. Automatic machines for the production of cross wires (so-called straighteners with cut-off units) are also available. Additionally, we have a wide range of individual spot welders for steel wire. Ljdpotvpilefx Abrohc

Sąlyga: naudotas, Gamybos metai: 1975, Technical details: Lsdpfsu Ix E Hox Abrehc Swing diameter over bed: 400 mm Swing diameter over support: 220 mm Turning length: 1,100 mm Centre height: 180 mm Spindle bore: Ø 45 mm Speed range: 31.5 - 1,400 rpm / 12 steps Feed range x-axis (longitudinal): 0.08 - 1.10 m/min Feed range y-axis (cross): 0.028 - 0.40 m/min Tailstock quill taper: MK4 Tailstock quill travel: 200 mm Total power requirement: 4.0 kW Machine weight approx.: 1.7 t Machine dimensions approx. LxWxH: 2.5 x 1.1 x 1.4 m Equipment: - Three-jaw chuck Ø 250 mm by Forkardt with reversible jaws - Multifix tool holder - Coolant system with pump - Chuck guard - Chip tray - Chip guard Accessories: - Chuck key - Tool holder - 2 gears

Sąlyga: geras (naudotas), Gamybos metai: 1979, Model making milling machine, universal model milling machine, milling machine, universal milling machine, tool milling machine, drill and milling machine, model making mill Lodpfx Absnzpx Rorohc - Manufacturer: Zimmermann, Universal Milling Machine Type FZ 1 with extensive accessories - Rotatable cross table: 490 x 400 mm - Travel (X/Y/Z): 320/385/430 mm - Spindle taper: SK30 - Drive: 1.1 kW - Speeds: 560 to 14,000 rpm, 8 steps - Accessories: included, see photos - Dimensions: 1000/680/H1970 mm - Weight: 477 kg

Sąlyga: labai geros būklės (naudotas), Knuth UFM 2 universalioji frezavimo staklė Techniniai duomenys X ašies eiga (rankinė) 800 mm X ašies eiga 750 mm Y ašies eiga 300 mm Z ašies eiga 400 mm Stalo dydis 1320x320 mm T formos grioveliai 5x14x63 mm Pavaros Y ašies eiga (8) 20 - 360 mm/min Z ašies eiga 600 mm/min Lhodpfsnfu Risx Abroc Veleno apsukos (12) 58 - 1800 min-1 Vertikalaus veleno konusas SK 40 Atstumas tarp veleno galo ir stalo 0 - 400 mm Galvos pasukimas 45° Horizontalaus veleno konusas SK 50 Pavaros Pagrindinio variklio galia 4 kW Z ašies variklio galia 0,75 kW Pavaros variklio galia 0,55 kW Aušinimo siurblio variklis 0,09 kW Aušinimo skysčio siurblio našumas 25 l/min Matmenys ir svoris Matmenys 1900x1720x1750 mm Svoris 2100 kg Galimas finansavimas per mūsų banką. komplett-konzept.leasingo.de Daugiau naujų ir naudotų prekių rasite mūsų parduotuvėje! Tarptautinio pristatymo kaina – pagal užklausą!

Sąlyga: naudotas, CNC Oxy-Fuel Cutting System BACH Type ACW 2500 Oxy-Fuel Cutting Machine with CNC Controller NBS 400 Lhsdpfxef Ncade Abrec Machine No. 14 561-06 Year of Manufacture: 2006 Cutting Area: 2500 x 6500 mm Track Length: 8000 mm Track Gauge: 3345 mm Track Height: 650 mm 2x Machine Cutting Torches with Burn Table