Sheet metal folder,bender,bending machin

PROD-MASZ Abkantbank Biegemaschine 1,25m/0.8 + Wulstmaschine+ Rollenschere

Būklė: naujas, Distance between spindle and table: 470 mm Total power requirement: 2.2 kW Weight approx.: 1.2 t Dimensions (LxWxH): Length 2400 mm, Width/Depth 2160 mm, Height 2300 mm, Weight 1200 kg Spindle speed: 60 – 4200 rpm - Heavy-duty design made from high-quality Meehanite cast iron - High concentricity accuracy due to tapered roller bearings, measured at less than 0.01 mm in the quill - Infinitely variable speed control - Clockwise/anti-clockwise rotation for thread cutting - X and Z axes with adjustable 55° dovetail guides - Y axis with flat guideway - Drilling-milling head tiltable ±45° - Coolant system - Clockwise and anti-clockwise rotation - Automatic quill feed, 3 steps, 0.04–0.15 mm/rev - Motorized feed on X, Y, and Z axes - Precision microfeed - Milling spindle with precision bearings - Mechanical spindle brake - Drilling depth scale and stop - Cross table with T-slots and coolant channel - Central lubrication - Height-adjustable safety shield with microswitch, protects against flying chips and parts for maximum operator safety - Robust and large dimensioned cross table, precision machined with T-slots MF 4-B: - Cross table load capacity: 300 kg - Large travel range: X / Y / Z axes 740 mm / 330 mm / 320 mm Dimensions and weights Length 2400 mm Width/Depth 2160 mm Height 2300 mm Weight 1200 kg Drilling and milling performance Max. face mill diameter: 76 mm Max. shank milling cutter diameter: 25 mm Drilling capacity in steel (S235JR): 24 mm Continuous drilling capacity in steel (S235JR): 20 mm Electrical connection Total connected load: 3 kW Supply voltage: 400 V Phase(s): 3 Ph Current type: AC Network frequency: 50 Hz Cedpfjd H Hhzjx Anlshd Horizontal milling table Length: 254 mm Width: 1370 mm Max. vertical spindle to milling table distance: 405 mm T-slot size: 16 mm T-slot number: 3 T-slot spacing: 63 mm Max. load capacity: 300 kg Horizontal spindle Overhang: 0 – 420 mm Coolant system Coolant pump(s) drive power: 90 W Motor(s) Vertical spindle normal operating power: 2.2 kW Standards and approvals Standard: DIN EN 55011 EMC category: C2 Travel X axis manual: 820 mm Y axis manual: 410 mm Z axis manual: 400 mm X axis automatic: 740 mm Y axis automatic: 330 mm Z axis automatic: 320 mm Vertical spindle Overhang: 0 – 420 mm Spindle taper: ISO 40 DIN 2080 Speed range: 60 – 4200 rpm Number of speed ranges: 2 Speed control: mechanical, stepless Milling head swivel range X-Y plane: 90° Milling head swivel range Z-X plane: 45° Quill diameter: 86 mm Quill stroke: 127 mm Quill feed: 0.04/0.08/0.15 mm/rev Milling head vertical travel Z axis: 470 mm Package unit: 1

Būklė: naujas, Gamybos metai: 2025, Manual segmented swing bending machine, 2-meter working width The SGR model is equipped with segmented bending tools on all three clamping elements: upper, lower, and bending beam. This allows sheet metal to be bent on all sides and, for example, the production of complex box shapes or workpieces with bends facing up and down. This is a versatile, high-performance, heavy, and extremely robust segmented box and pan brake—not your typical bending brake, but much stronger and more durable. A box and pan brake is characterized by full segmentation along the entire 2-meter working length. The upper and lower segments are easy and quick to remove, and the bending beam is also divided into segments. The bending angle is adjustable from 0 to 160 degrees. Clamping is performed via a foot pedal, leaving your hands free to easily position the sheet—open and close with your foot. The bending beam is connected to two gas pressure dampers, making operation of the bending beam extremely easy. On the rear of the machine, there are two practical toolboxes for segments or tools. Technical data: Chjdpfecntp Djx Anlod - Max. working width: 2050 mm - Max. bending angle: 160 degrees - Max. sheet thickness (steel): 1.2 mm - Weight: 600 kg - Segment jaw widths: 30, 40, 50, 60, 70, and 100 mm - All three clamping beams are equipped with segment jaws (fully segmented) - Back gauge for preset bending angles - Degree scale Clearance: 100 mm Including casters Delivery time: every week Cash payment upon delivery Delivery costs: 180 Euros We look forward to hearing from you! Invoices are issued either at 0% VAT for intra-community supplies or plus 19% VAT (German invoice).

Būklė: naudotas, Funkcionalumas: nepatikrintas, GENERATOR 200KW-250KVA DIMENSIONS WITHOUT MUFFLER: 440X350X210 (H) Csdpfsv R Enijx Anlohd

Būklė: geras (naudotas), Gamybos metai: 2009, WIG suvirinimo aparatas, inverterinis suvirinimo aparatas, WIG suvirinimo aparatas, inverterinis suvirinimo aparatas Chedpfoqw D Eijx Anljd -Gamintojas: Merkle, WIG suvirinimo aparatas su vandens aušinimu, su transportavimo vežimėliu -Tipas: TIG 240 DC -Suvirinimo galia: maks. 240 A -Aušinimas: Merkle WK 230 vandens cirkuliacinis aušintuvas -Priedai: įsk. masės kabelis, žarnų komplektas, žr. nuotraukas -Matmenys: 970/560/A1085 mm -Bendras svoris: 99 kg

Būklė: naujas, Gamybos metai: 2025, Delivery every Monday, Tuesday – RELIABLE! Folding machine / bending machine with cut-outs in the cheeks, allowing window sills to be bent on three sides in one operation. Cut-outs of 6 cm upwards and 6 cm downwards. This modern folding machine offers plenty of internal space and features a slim 15 mm bending beam. The offered bending machine Red 2700 / 1.0 is a cost-effective alternative to segmented folding machines for less complex applications. This is made possible by the special construction with dedicated cut-outs. The machine performs bending operations both upwards and downwards from the tip. Strengths of this bending machine include high performance combined with precision and repeatability in processing. Designed for processing steel, aluminum, and other sheet materials, this folding machine is extremely versatile. RED 2700/1.0mm incl. 2 levers right and left Technical data: - Maximum working width: 2580 mm - Bending capacity: up to 1.0 mm (steel sheet) - All non-ferrous metals: 30% higher bending capacity - Bending angle: max. 160 degrees - Cutting with roller shear across the entire working width - Bending beam thickness: 15 mm - Upper beam can be raised in three positions - Upper beam lift: 80 mm - Angle scale - Angle stop up to 90 degrees - Rear support frame for holding sheets - Front depth stops - Weight: approx. 490 kg Roller shear (max. capacity 0.8 mm / steel) available for an additional 350 euros The machine complies with CE guidelines and comes with a 12-month warranty. Shipping: 240 euros nationwide within Germany Delivery time: 2-4 days Cash on delivery possible We issue invoices with 0% VAT (intra-community delivery) as well as with 19% VAT. Chodsb H Ac Ispfx Anljd We look forward to your enquiry!

Būklė: naudotas, Gamybos metai: 1989, Sheet length: 3,100 mm Sheet thickness: 8.0 mm Cutting width: 3,100 mm Total power requirement: 11 kW Approx. weight: 7,500 kg Dimensions (LxWxH): 4,180 x 2,150 x 2,000 mm Codperu Un Hsfx Anljhd Technical data: Sheet thickness: 8 mm Cutting length: 3,100 mm Back gauge: motorized, 1,000 mm Blade gap adjustment 11 kW

Būklė: naudotas, Gamybos metai: 1996, Techninės specifikacijos: Chedszmyg Iepfx Anlsd Vardinė galia: 80 kVA elektrinė versija – įtampa/dažnis: 400/50 V/Hz Vardinė srovė: 92 kW Vardinė galia: 80 kVA Darbo valandos: 154 val. Vardinė generatoriaus srovė: 115 A Variklio sūkių skaičius: 1500 aps./min. Cilindrų skaičius: 6 cilindrai Mašinos svoris (apytiksliai): 1300 kg Įrenginį gamino įmonė „FIMAG Finsterwalder Maschinen und Anlagenbau GmbH“. Naudotas avarinis elektros generatorius su „IVECO AIFO“ 6 cilindrų eiliniu dyzeliniu varikliu ir „Stamford“ generatoriumi. Pagamintas 1996 m. Variklio galia – 73 kW esant 1500 aps./min., generatoriaus galia – 123 kVA arba 100 kW, 400/230 V, 50 Hz, vardinė srovė – 177 A. Dyzelinis variklis, atšaldomas vandeniu, su įprasta valdymo sistema. Generatorius dirbo nedaug, buvusio savininko teigimu, yra labai geros techninės būklės ir neveikia nuo 2022 m. kovo 17 d.

Būklė: naujas, Gamybos metai: 2025, Personal relationships with our partners and customers are our top priority. Only through close cooperation from the planning phase onwards can the desired goals be achieved. Folding Machine 1400/1.2 Technical Data: - Max. working length: 1400 mm - For steel sheet up to 1.2 mm - Weight: approx. 150 kg - Cutting with shears along the entire working length - Upper beam can be lifted in three positions - Max. clear opening between the beams: 80 mm - Warranty: 12 months Cedpfxocpn E Ae Anlehd - Delivery with our own van - CE certificate - Price: 1,050 Euro - Delivery to Germany: 180 Euro - Delivery time: every week - Cash payment upon delivery - Rotary shear (max. cutting capacity up to 0.8 mm [steel sheet]) + 350 Euro We look forward to hearing from you!

Būklė: naujas, Gamybos metai: 2025, Fester Klammernformer CF-25 wurde von unserem Unternehmen für die Produktion von festen Klammern für Stehfalzdächer mit einer Falzhöhe von 25 mm entwickelt. Die folgende Klammer ist das Hauptelement zur Befestigung, mit dem das fertige Dachelement auf der Dachunterkonstruktion fixiert wird. Eine feste Klammer bietet viele Vorteile wie eine einfache Konstruktion, geringe Produktionskosten und eine unkomplizierte Montage. Wir fertigen Klammernformer für 25, 27 oder 39 mm Klammerhöhen. Als Ausgangsmaterial können Metallbänder mit der erforderlichen Breite und einer Dicke bis zu 0,8 mm verwendet werden. Der Klammerformer stellt das Produkt in einem einzigen, einfachen Arbeitsgang her – dazu muss lediglich das Blech in die Presse eingelegt und der Pressvorgang manuell ausgelöst werden. Der Klammernformer biegt die Klammer und stanzt die erforderlichen Löcher in nur einem Schritt. Mit unserer Klammerpresse hat der Anwender die Möglichkeit, Festklammern in beliebiger Stückzahl selbst zu produzieren – entweder für den Eigenbedarf oder zum Verkauf an Dachdeckerbetriebe. Der feste Klammernformer ist leicht und dadurch mobil und einfach zu transportieren. Für einen produktiven Einsatz muss der Klammernformer sicher auf einer ebenen Fläche fixiert werden. Die von uns gefertigte Klammerpresse CF-25 spart Ihnen Zeit und Kosten für die Beschaffung von Stehfalz-Befestigungselementen, hilft Ihnen, Ihre eigene Fertigung effizient zu organisieren und erleichtert die Dachmontage. Cjdpsqxadbsfx Anlohd Wir produzieren ebenso Schiebe-Klammernformer. Optional können wir einen festen Klammernformer für Stehfalzelemente mit 25, 27 oder 39 mm Falzhöhe liefern, die Sie auf folgenden Maschinen fertigen können: - Stehfalz-Profiliermaschine F3 - Dachpaneel-Stehfalz-Rollformer F3-27 mit Klammerprägung - Stehfalz-Rollformer F3-39

Būklė: naujas, Gamybos metai: 2025, High-quality workmanship and meticulous attention to detail in every component ensure reliable and long-lasting operation of this modern sheet metal folding machine. Thanks to the foot pedal, the range of applications has been further expanded. This allows you to bend at any tool position without having to constantly reach for the clamping lever at the right end of the machine. This improves both the accuracy and speed when positioning the workpiece at the folding edge. With this foot-operated folding machine, you can bend sheet metal from three sides. The machine design includes a clearance for bent processing, with 6 cm of vertical movement. Chjdpscb H Exefx Anled Folding Machine RED PLUS 2200/0.8 including foot operation and transport rollers If you know us, you know that we are a reliable company :) RED PLUS 2200/0.8 Maximum working width of folding machine: 2200 mm Bending capacity: 0.8 mm (steel sheet) For all non-ferrous metals: 30% higher bending capacity Bending angle: max. 145 degrees Continuous cut with roller shear along the entire working width Bending rail thickness: 15 mm Upper beam can be raised to three positions Upper beam stroke: 80 mm Degree scale Angle stop up to 90 degrees Rear frame for supporting sheet metal Front depth stops Weight: approx. 230 kg Roller shear (max. cutting capacity 0.8 mm / steel) + €350 The machine complies with CE regulations and comes with a 12-month warranty. Transport €180 Delivery time: weekly We look forward to your enquiry!