Pialle

Primultini

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2012, veikimo valandos: 7 792 h, keliamoji galia: 4 000 kg, kėlimo aukštis: 5 650 mm, apkrovos centras: 500 mm, kuro tipas: dujos, Sertifikuota DGUV iki: 11/2025, šakių ilgis: 1 600 mm, padang padangų: 95 procentas, tuščias svoris: 7 183 kg, spalva: geltonas, We are offering an absolutely top condition forklift from Jungheinrich. It underwent a comprehensive 5-star refurbishment by Jungheinrich in 2021 and has only run 45 hours since then. The paint is original and has not been resprayed or touched up. The forklift has always been stored indoors and is in excellent condition. Maintenance and UVV (accident prevention inspection) are up to date. Manual and keys are, of course, included. Last major service: October 2024 UVV valid until 10/2025 Operating hours: 7,792 (since refurbishment: 7,744) Model: TFG 540s SP G+E 120-565 DZ Type: LPG Forklift Year of manufacture: 2012 / 5-star full refurbishment 03/2021 including Kaup fork positioner T466 Load capacity: 4,000 kg Lift height: 5,650 mm Dlodpfxjw N Iz Hs Admoa Overall height: 2,640 mm Fork length: 1,600 mm Load center: 500 mm Mast: Triplex with free lift Features: Solo-Pilot, road lighting (in accordance with StVZO), LED lighting with 2 work lights at the front and rear, front, cabin roof and rear windows, steel doors, leather seat, rearview mirror, armrest, auxiliary hydraulics with 2 functions Kaup Fork Positioner NEW 4.8T 466B Since refurbishment, the truck has only run 45 hours. All UVV and maintenance services have been carried out.

Sąlyga: naudotas, Gamybos metai: 1971, Peilių velenas Z = 2, juostiniai obliaus peiliai, obliavimo plotis 520 mm Laikymo vieta: Nattheim Djdpev I Eatefx Admela

Sąlyga: geras (naudotas), Four-side planer Weinig Unimat 23 Lamella Machine 9 spindles, grooved bed Working width: 230 mm, Working height: 170 mm, Spindle diameter: 40 mm, Feed: 5.5 kW / 6 – 36 m/min, Spindle configuration: 1-Bottom (5.5 kW) 2-Right (5.5 kW) 3-Left (5.5 kW) Djdopq T Rbspfx Admjla 4-Right (5.5 kW) 5-Top (11 kW) 6-Bottom (5.5 kW) 7-Top (7.5 kW) 8-Bottom (37 kW) 9-Universal (11 kW) 5 powered feed rollers in table

Sąlyga: naudotas, Gamybos metai: 1986, from model making shop used, top condition, low running hours Make: Panhans Model: 325 Year of manufacture: 1986 GS-tested Motor: 4.0 kW Control panel on top Planing width approx. 510 mm Infeed table length approx. 1600 mm Outfeed table length approx. 1150 mm Auxiliary fence Slotted/low-noise table lips Number of knives: 4 Knife system: strip planing knives Chip thickness indicator Dsdpfx Adjwhqw Nsmela Hollow-chamfer joint Automatic brake Hollow-chamfer joint adjustment Extraction port D 140 mm Space requirement approx. 2800 mm x 800 mm x 1200 mm Weight approx. 800 kg Location: 97447 Gerolzhofen, free loaded onto truck, unpacked Delivery as is, as inspected, without guarantee or warranty

Sąlyga: naujas, Gamybos metai: 2025, Cut-Off and Mitre Saw Type: ZS 200 N – 5 kW Motor with machine stand, Saw tiltable via handwheel and worm gear (back side) Saw blade diameter: 520 mm, saw blade bore: 50 mm Blade speed: 2800 rpm 400 volts / 5 kW (S6/40%) motor with brake and automatic star-delta switch g Cutting width at 90 degrees: 420 mm Cutting width at 45 degrees (swiveled): 295 mm Cutting height at 90 degrees: 200 mm Cutting height at 45 degrees tilted: 140 mm Saw can swivel to one side to approx. 25 degrees for acute angles and tilt left up to 30 degrees for flat angles TCT circular saw blade 520x4.0/2.8x50 mm 60 teeth WZ neg. for wood RLH-ST60 6.0 meter measuring length, mounting side: left Length stop / roller conveyor, heavy-duty design, Stop slider adjustable from operator position via handwheel, electronic-digital measurement display, stop slider pneumatically clamped, flip-away stop flap to the rear, with steel rollers 60 mm diameter, roller spacing 200 mm, 400 mm roller width, with 4 support feet and connection piece: overall length: 6.7 m Surcharge for digital electronic display unit Type: FIAMA EP6 for 230 V mains operation, with electrical on/off switch and socket. Powerful dark red LED display. Higher accuracy compared to battery-powered crystal display Dedpfx Adsk H Ic Uemela RO-ST60 4.0 meter infeed roller conveyor Mounting side: right Heavy-duty design, steel rollers: 60 mm diameter, roller spacing: 200 mm, 400 mm roller width, 3 support feet and connection piece Location: Ex stock 54634 Bitburg - immediately available - Image: similar. Machine is still in its original packaging

Sąlyga: naudotas, Kompresorius Gardner Denver SKG-275.2V.02 (60) Šoninių kanalų pūstuvas Pagaminimo metai 2007 - Serijos Nr. 2750748 Oro srautas / Pajėgumas 100 m3/h Galia 1,5/1,8 kW / 2800/3400 min Kapitalinis remontas 2014 m. Dedpfx Adjw Nbikjmela Internetinė vaizdo apžiūra per WhatsApp - MS Zoom - Telegram Sandėlyje Emskirchen/Nuernberg - Iš karto prieinama - Galima išbandyti

Sąlyga: naudotas, Slotting spindle 1 pc. Number of milling units 5 pcs. Spindle diameter 50 mm Control: Weinig, PC-Nexus #2774 Weinig Unicontrol 6 with NC spindles Machine will be cleaned and fully inspected before delivery ----- Technical Data Summary (For any additional included accessories, please inquire) Item 1: Cross-Cut Saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Maximum tool diameter: 400 mm > Motor power: 3 kW > Radial travel, pneumatically controlled, 8 positions, e.g. for edge rounding from above > Laser guide light for cut section identification Item 2: Rounding Unit, Horizontal Lower Position ----- > Position: horizontal, bottom > Motor power: 1.5 kW > Spindle diameter: 20 mm > Clamping length: 25 mm > Spindle speed: 9,000 rpm > Max. tool diameter: 130 mm > Axial movement mechanically linked with cross-cut saw > Radial travel, pneumatically controlled (on/off) NC-Controlled Length Stop ----- > Length: 3,500 mm > Electronic length stop Item 3: Tenoning and Slotting Spindle ----- > Number of tools: variable, stepless adjustment, NC > Tool clamping length: 320 mm > Vertical stroke: variable 254 mm, stepless adjustment, NC-controlled > Spindle speed: 3,500 rpm > Max. tool circle diameter: 320 mm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Item 4: 1st Profiling Spindle (Climb/Counter-Climb Cutting) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool circle diameter: 232 mm > Motor power: 7.5 kW Dsdpfx Aovu Hghsdmjla Item 5: 2nd Profiling Spindle ----- > Position: vertical right > Number of tools: variable, stepless adjustment, NC > Tool clamping length: 320 mm > Vertical stroke: variable 254 mm, stepless adjustment, NC-controlled > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool circle diameter: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions Sash guide consisting of: Guide fence on the stop (area of climb-cut spindle), Sash support rail from above in the area of the vertical right profiling unit and profiling spindle. Item 6: Horizontal Upper Profile Milling Unit ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 9,000 rpm > Max. tool circle diameter: 130 mm > Axial travel: 30 mm, 8 positions > Radial travel: 125 mm, 8 positions Item 7: 3rd Profiling Spindle (Hardware Spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial travel: 115 mm, 8 positions > Radial travel: 110 mm, 8-position turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool circle diameter: 210 mm > Motor power: 3.0 kW Item 8: Bottom Profile Milling/Grooving Unit ----- > Motor power: 3.0 kW > Tool clamping length: 125 mm > ...

Gamybos metai: 1977, Sąlyga: visiškai atnaujintas (naudotas), I am selling a Rapid DGS double mitre saw, year 1977. Swivelling heads. Drilling heads on each side at the front included. In very good condition. Available immediately. Dlodpfxsd N Rb Do Admoa

Sąlyga: naudotas, Gamybos metai: 1985, Working width: 500 mm Djdpfx Asm H Uxrsdmsla Cutterhead: Strip knives Number of knives: 4 Surface table length: 2700 mm Surface table adjustment: Lever Chip removal display: Scale Surface fence angle adjustable: Yes Motor power: 4 kW Motor brake: Yes, automatic Machine length: 2800 mm Machine width: 1000 mm Weight: 1050 kg

Sąlyga: labai geros būklės (naudotas), pjovimo plotis (maks.): 700 mm, pjovimo aukštis (maks.): 120 mm, Right-hand machine, machine no. 188 hydraulic width adjustment, electrically adjustable Infinitely variable feed rate adjustment 0 - 80 m/min Drive motor 37 kW with V-belt pulley and motor tensioning rail Various saw heads, spacer rings, and saw blades Infeed table with individual stands Fixed outfeed table Dlsdpov Raqxefx Admsa The machine has been completely refurbished and is in top condition.