Balių presas 22 kW, su 50 t presavimo galia

Presona LP 50 EH 1

For sale is a partially overhauled Presona baler with a pressing force of 50 t and a 22 kW drive motor, year of manufacture 2005.

Technical data - baler:
Manufacturer: Presona AB
Model: LP 50 EH1
Year of manufacture: 2005
Operating hours: 30,408 (as of April)
Number of bales pressed: 198,059 (as of April)
Main press force: 50 t
Specific pressing force: 63 N/cm²
Theoretical throughput: 530 m³/hour
Throughput under working conditions: 260 m³/hour
Feed opening: 1,250 x 1,100 mm
Press chamber volume: 2.2 m³
Bale dimensions: 1,100 x 720 mm, variable length
Drive power: 22 kW
Tying: 5-fold vertical, fully automatic
Throughput rates at bulk density:
- 30 kg/m³: 6 to 7 t/h
- 50 kg/m³: 7 to 9 t/h
- 100 kg/m³: 11 to 14 t/h
Bale density (paper/newspapers): 400 to 550 kg/m³
Hydraulic tank volume: 600 L
PLC: Telemecanique TSX Micro
Operator panel: Schneider Magelis
Effective transport dimensions (excluding press): 8,125 x 2,300 x 3,000 mm (L x W x H)
Transport weight (press): approx. 16 t

Condition of the baler:
The machine was partially overhauled in our workshop and general maintenance was carried out. After completion of the overhaul, the baler was tested under live operation and is now available for short-term sale.

The following overhaul work was carried out:
General works:
- Machine cleaned, derusted, primed, and partially repainted
- Wire grooves in the feed-throughs of the press channel welded shut and smoothed

Hydraulic unit:
- Hydraulic oil tank completely drained, tank cleaned, refilled with new oil
- Oil filter and air filter replaced
- Faulty oil sight glass on hydraulic oil tank replaced
- All hydraulic hoses replaced

Electrics:
- English language installed in the program menu
- Two key switches on the operator panel replaced
- Control cabinet replaced
- Signal lamp on the control cabinet replaced
- Flap limit switch replaced
- Wiring of the wirbulator renewed, connected and tested

Press ram:
- All four running rollers on the press plunger removed and replaced
- Main hydraulic cylinder dismantled, disassembled, and partially overhauled; cylinder tube honed, all seals replaced, leak test performed
- All plastic wear blocks on the press ram replaced

Pre-press flap:
- Both bearings on the pre-press shaft replaced
- Both hydraulic cylinders dismantled, disassembled, and partially overhauled; both cylinder tubes honed, all seals replaced, leak test performed
- Scraper flap on the pre-press replaced

Tying unit:
- Two complete needles with wire deflection rollers replaced
- Needles aligned and adjusted
Dsdpfx Aezbxxaon Hech
- All wire deflection rollers in the needle heads replaced
- Twister finger replaced
- Two twister shafts replaced
- All 8 wear plates on the Drillomat, under the twister fingers, replaced

Scope of delivery:
Only the baler is being sold.

Documentation (operator’s manual, CE declaration, electrical/hydraulic circuit diagram) is complete. Viewing by appointment possible. No liability accepted for technical details or possible errors.

Skelbimas buvo automatiškai išverstas. Galimos vertimo klaidos.