Pusiau automatinis padėklų prikalimo stalas

Pneumatico PT-2800

Sąlyga: naudotas, Gamybos metai: 2001, Wood dimensions to be processed: Incoming lengths min/max: 500 – 6500 mm; Full optimization up to max. 1500 mm. Incoming widths min/max: 40 – 300 mm. Incoming thicknesses min/max: 15 – 120 mm. Maximum wood cross-sections: 300 x 40 mm, max. 200 x 120 mm. Fixed lengths after saw: min. 510 – 2800 mm. Special application: Cutting of blocks, length min/max: 100 – 200 mm (Note: multiple block length during sorting, blocks are transported to the end of the sorting line and drop into customer-side mesh boxes). Cut/trimming tolerance: +/- 0.8 – 1.5 mm (for wood with minimum resin content and even surface. Tolerance up to 1 m fixed length, max. tolerance for longer parts up to 2.5 m). Thickness tolerance: +/- 3 mm. Curvature of wood in all directions: max. 10 mm per meter length. Types of wood: Softwood or hardwood. Machine performance: Feed speed continuously adjustable up to max. 230 m/min; cutting cycle 0.6 – 1 s. To determine the practical daily output, an effectiveness factor dependent on the customer’s production conditions must be considered. Infeed and saw working height: 900 mm (install required on customer-side platform, saw requires concrete base). Sorting working height: 2000 mm. Connection values: Total electrical connection load approx. 18 kW. Operating voltage: 380 Volt / 50 Hz. Voltage fluctuations max. 5 %. Air consumption approx. 1200 NL/min. Operating pressure approx. 8 bar. Extraction velocity approx. 30 m/s. Paint finish: pebble grey RAL 7032 and blue NCS 5030-R 80 B. Bledpfx Aajw Sy T Hohed POSITION OVERVIEW: Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge. Pos. 2: Support roller without drive, at the end before steel table for easier feeding. Pos. 3: Length measuring station with built-in fluorescence camera for detecting defect markings. Pos. 4: Automatic non-contact width measurement. Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version with built-in waste chute incl. equipment package for large wood cross-sections. Graphic-capable input terminal (16 x 40 characters, numeric keypad) with software package for optimization and plant control. The following are available for processing: - max. 16 product groups - max. 8 qualities per product group - max. 200 fixed lengths per product group. Pos. 6: Discharge conveyor belt as sorting station with drive unit, length 7500 mm. Pos. 7: 2 ejectors mounted on discharge conveyor belt. Location: Nattheim

Gamybos metai: 2011, Sąlyga: beveik kaip naujas (naudotas), For sale is 1 roller conveyor including one geared motor each: Technical data: Year of manufacture: 2011 Length: 12.75 m Width: 1.40 m Height: 1.00 m Load capacity: up to 4 tons Geared motor per conveyor: SEW-EURODRIVE R87 DREE90L4 (for more details, please refer to the type plate in the photo) Bjdpfxoihpn Nj Aahold Three out of four roller conveyors are equipped with a continuous wooden side wall along the entire length, while one conveyor features a lateral wooden wall over a length of 5.20 m. Two out of the four conveyors are each fitted with 3 lateral removal systems. (see pictures)

Sąlyga: naudotas, Gamybos metai: 2002, veikimo valandos: 37 000 h, mašinos/transporto priemonės numeris: 1651, rankos pasiekiamumas: 15 200 mm, keliamoji galia: 1 900 kg, vėžės plotis: 3 000 mm, Įranga: kabina, kranas, Year of manufacture: 2002 Machine number: 1651 Track width, m: 3.0 Crane type: OBX II (year of manufacture 1997) Reach: 15.2 m Lifting capacity without grab: 1,900 kg / 15.0 m Grab: included Crane position: behind the cab Bedpsv Hwk Uefx Aahsld Cab position: center !! Sale on behalf of a customer !!

Sąlyga: geras (naudotas), The debarker is ideally suited for debarking both hardwood and softwood logs. Carriage made of heavy-duty steel construction 5 pairs of drive wheels Milling arm made from heavy-duty steel construction Hydraulic milling head 22 kW motor Bledpfjtuyr Iox Aahsd The log feeder shown in the photos is not included in the offer and is available at an additional cost of 25,000 PLN / 5,500 EUR.

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2015, Used injection moulding machine direct from the manufacturer! As the manufacturer KraussMaffei, we offer one of our pre-owned injection moulding machines for sale here. CONTROL SYSTEM - MC4 TECHNICAL DATA CLAMPING UNIT - Clamping force: 5000 kN - Distance between tie bars (h x v): 900 x 800 mm - Maximum mould opening distance: 1170 mm - Minimum mould installation height: 480 mm - Opening stroke of platen: 1650 mm - Ejector stroke: 250 mm - Ejector force: 95 kN (reverse: 48 kN) INJECTION UNIT - Screw diameter: 90 mm - L/D ratio: 20 - Injection pressure: 1742 bar - Injection volume: 1953 cm³ - Shot weight for PS: 1777 g - Injection rate: 649 cm³/s - Nozzle contact force: 115 kN Electrical parameters Bledpfxenh Rnue Aahod - Pump connected load: 90 kW - Heating capacity: 44 kW Weight & Dimensions - Net weight: 25.8 t - Machine dimensions (L x W x H): 7.65 x 2.33 x 2.55 m As standard, we supply this machine in fully functional, basic condition. Additionally, as the original manufacturer, we can provide various options depending on individual requirements, such as: - Energy optimisation upgrades - Possible integration with KraussMaffei digital products - Plasticising unit conversions - Optional: organisation and handling of delivery (not included in the price) - Optional: setup and commissioning (not included in the price) With us, you benefit from first-class service and also have the option to purchase desired spare part packages for wear parts—ensuring seamless production with your newly acquired used machine. Don’t hesitate to get in touch with your enquiry today!

Sąlyga: naujas, New hydraulic high-speed presses from min. 300t up to max. 2500t. We provide new mechanical and hydraulic presses for various applications, tailored to your specific requirements. Simply let us know your needs and we will prepare an attractive offer including installation and service. ISGEC has delivered to more than 26 countries in recent years, including Thailand, Indonesia, Vietnam, USA, Germany, Spain, France, Brazil, Hungary, Mexico, Bangladesh and over 200 presses to 40 Japanese customers. We are proud to be an official distribution partner since 2020 and look forward to your inquiry. Bledsf Rt Irepfx Aahsd

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, pjūklo disko skersmuo: 600 mm, darbinio aukščio: 900 mm, pjūklo pavara: 7 500 W, 45° tilt-able chainsaw Blodpfx Ajwzg E Neahed Equipped with a 6-meter pusher Drop deck with 6-strand loading chains for faster loading Machine overhauled and fitted with a new digital touchscreen

Sąlyga: labai geros būklės (naudotas), Storti RM 500 Edger - Italian manufacture - Year of manufacture: 1993 - Electrically adjustable saw blade spacing TECHNICAL SPECIFICATIONS: - Maximum cutting width: 435 mm Bjdpfxek Talpj Aahsld - Maximum cutting height: 170 mm - Motor power: 2 x 22 kW - Maximum workpiece width: 600 mm - Minimum material length: 800 mm - Maximum blade diameter: 600 mm - Spindle diameter: 40 mm - Two upper feed rolls - One upper pressure roll - Feed roll motor power: 2 x 1.1 kW - Feed rolls with automatic pressure adjustment - Seven lower driven toothed rollers - Electric adjustment of saw blades - Two lasers - Feed speed: 25 and 50 m/min - Infeed table: 2950 mm - Outfeed table: 3000 mm - Drive roller diameter: 100 mm - Feed drive motor power: 2 x 1.5 kW Transport dimensions: 500 x 240 x 180 cm Weight: 3500 kg

Sąlyga: labai geros būklės (naudotas), 3-axis (X-Y-Z) CNC machining center – Cantilever design Movable horizontal plate (workpiece), static machining head Control system (BiesseWorks software), with separate electrical and control panels Machining head safety enclosure, safety tread mats Infeed table (workpiece support) at entry No. 2 workpiece clamping vices positioned within the working area Outfeed table (with conveyor belt) Minimum workpiece dimensions (X-Y-Z) mm 90 x 70 x 8 (approx.) Bledpfxswb Alls Aahsd Maximum workpiece dimensions (X-Y-Z) mm 3000 x 1300 x 60 (approx.) Total connected load (kW) 24 WORKING UNITS (TOP): Independent vertical drilling spindles: 29 pcs. Independent horizontal drilling spindles: 10 pcs. (8 X + 2 Y) Grooving saw unit (for X-axis machining), diameter 160 mm (1 pc. x approx. 3.5 kW) Vertical main spindle (milling unit) ISO 30 (1 pc. x approx. 4.5 kW) WORKING UNITS (BOTTOM): Independent vertical drilling spindles: 29 pcs. Independent horizontal drilling spindles: 10 pcs. (8 X + 2 Y) Grooving saw unit (for X-axis machining), diameter 160 mm (1 pc. x approx. 3.5 kW) Vertical main spindle (milling unit) ISO 30 (1 pc. x approx. 4.5 kW)

Sąlyga: naujas, Table length: 2200 mm Table width: 1500 mm Lifting height: 1850 mm Blodpsupxwksfx Aahsd Load capacity: 2000 kg Minimum lifting height: 260 mm Total power requirement: 1.5 kW Lifting speed upwards (unloaded): 40 sec. Lifting speed downwards (unloaded): 30 sec. Connection voltage: 400 V Machine weight approx.: 0.45 t Space requirements approx.: 2.2 x 1.5 x 0.26 m The hydraulic lift tables are electrically powered and operated. They are equipped with a safety contact strip for secure lowering operation. Widely applicable for workshops, assembly departments, loading bays, etc.