Lakštinio metalo lenkimo staklės - 3 ritinėliai

PEKRUN 2000 / 6

Būklė: naudotas, Max. bending length: 2000 mm Max. sheet thickness: 8 mm steel Right and left rotation Guodpfxjmhm Els Al Nsi Motorized rear roller adjustment Safety emergency stop switch Conical rolling possible

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, The EVO is the latest innovation in sheet metal processing. It is equipped with numerous innovative and patented features that increase your production capacity and productivity while maintaining the lowest total operating costs. The high-quality components used in this machine, along with the latest version of the BENDtronic® control system—installed as standard on all EVO machines—are particular highlights. Available from stock: HAEUSLER EVO 31031 4-Roll Plate Bending Machine / Plate Rolling Machine Manufacturer: Haeusler Model: EVO 31031 4-Roll Plate Bending Machine / Plate Rolling Machine Origin: Germany / Switzerland Year of manufacture: 2024 Condition: NEW, demonstration machine Availability: immediately Specifications: Working width: 3,100 mm Rolling capacity: 14 mm Pre-bending capacity: 12 mm Not the right machine? As a representative of Haeusler, we can configure your desired machine according to your needs and provide you with an offer. Gjdpfxexwmb Hj Al Njui Do not hesitate to contact us.

Būklė: naudotas, Gamybos metai: 1986, Lakšto plotis: 2040 mm Lakšto storis: 4,0 mm Stovo plotis: 2100 mm Veleno diametras: 150 mm Bendras galios poreikis: 7,0 kW Staklių svoris apie 2,2 t Užimama vieta apie 2,95 x 1,0 x 1,75 m 3 velenų lakštų lankstymo staklės - 2 varomi velenai - Galinis velenas elektriškai reguliuojamas - Kūginis lenkimas Gusdpfsy Ezzyjx Al Nsi - Kojinis jungiklis - Avarinio sustojimo įrenginys

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, bendras aukštis: 5 600 mm, bendras ilgis: 11 200 mm, bendras plotis: 5 100 mm, įvesties srovės tipas: trifazis, garantijos trukmė: 24 mėnesiai, vidinis aukštis: 4 970 mm, vidinis ilgis: 11 000 mm, temperatūra: 80 °C, vidinis plotis: 5 000 mm, oro poreikis: 52 000 m³/val, įėjimo įtampa: 380 V, šildymo galia: 250 kW (339,91 AG), galia: 45 kW (61,18 AG), kuras: suskystintos naftos dujos (LPG), įėjimo dažnis: 50 Hz, energijos suvartojimas: 45 kWh, izoliacijos storis: 50 mm, nominali galia: 250 kW (339,91 AG), plieno lakšto storis (maks.): 2 mm, Įranga: apšvietimas, * Air Treatment Unit: The air treatment unit is a recirculation system that supplies the cabin with filtered fresh air and expels used air during the painting process. It heats the air to 60°C, mixes 10% fresh air with recirculated air via an automatic multi-damper system, and reheats the air before it is fed back into the cabin. Air is heated using a burner and heat exchanger, both made from high-grade 304 stainless steel and housed in the fresh air unit. During painting, the air passes through two stages of filtration (front and ceiling filters) before entering the cabin. The contaminated air is also filtered twice (inlet and outlet filters) before leaving through the extraction unit. Air treatment units are insulated like the side walls to minimize heat loss and are equipped with rubber seals on the covers to protect against possible vibrations and noise. The exhaust air is regulated by a damper in the exhaust air duct, which helps control the cabin’s internal pressure. * PRINCIPLE OF OPERATION FOR THE CABIN: Processes inside the cabin are controlled via an operator panel that manages the following steps: * PAINTING PROCESS: During painting, 100% fresh air is drawn in from outside and passes through front filters before entering the distribution chamber at ambient temperature. The air is then extracted through the exhaust unit. Floor filters (paint stop) capture paint particles, and the air passes through final exhaust filters before being released. * FLASH-OFF PROCESS: After painting, the cabin continues to operate for about 15 minutes to expel residual solvents and thinners. During this process, fresh air from outside circulates in the cabin. * DRYING PROCESS: In this phase, 80% of the air circulating through the cabin is heated to 60°C and supplied to the cabin via the distributor. Since 20% of the solvents are released during drying, they are expelled along with this air. Industrial paints are generally dried at 60°C, though the cabin temperature can be adjusted via the operator panel as needed. * COOLING PROCESS: Gjdpfxewzl Hxo Al Noui After the 30-minute drying phase, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system is restarted. During the 5-minute cooling phase, fresh air from outside circulates in the cabin, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT: These control panels manage the functions and operation of all machinery and devices integrated into the cabin. The panel is constructed from robust galvanized sheet metal and steel profiles, and is fully enclosed for protection from dust and moisture. Electrical Components and Switching Panels: • The switching panel includes all necessary components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for control and command connections between the control panel and motors or other electrical devices. • Wiring is designed to allow for cabin relocation, if required. • Operating equipment is powered at 380 V 50 Hz, while control devices run at 220 V.

Būklė: naujas, Lakštinio metalo plotis: 3100 mm Lakštinio metalo storis: 13 mm Lenkimas: 10 mm Viršutinio volo skersmuo: 300 mm Apatinio volo skersmuo: 270 mm Šoninio volo skersmuo: 210 mm Bendras galios poreikis: 11 kW Staklių matmenys: 5600 x 1800 x 1500 mm Staklių svoris: apie 8.800 kg Priedai/įranga: Gsdpfx Aoyv Nh Nol Noui - Kūginio lenkimo įtaisas - Indukciškai grūdinti volai - Skaitmeninis šoninių volų indikatorius - Mašina iš plieninės konstrukcijos - Atskiras valdymo pultas - Dviejų greičių režimas - Visi volai su rutuliniais guoliais - Viršutinio volo atlenkiamą ir atraminį guolį galima valdyti iš valdymo pulto. Atidarius atlenkiamą guolį, volas automatiškai pakeliamas aukštyn. - Kūginis volų reguliavimas per valdymo pultą - Centriniai volai varomi hidraulinio variklio ir planetinio reduktoriaus (viršutinis ir apatinis volai) - Kalibravimas

Būklė: naudotas, Skardos plotis 3000 mm Skardos storis 6 mm Lenkimo kampas 4° Valco skersmuo 205 mm Bendrasis galios poreikis 5 kW Mašinos svoris apie 3,7 t Reikalingas plotas apie 4,0 x 1,4 x 1,5 m Guedpfxj Ahkino Al Nsi „Roundo“ hidraulinė skardos lenkimo mašina su 3 valcais: - Hidraulinis, lankstomas guolis ir nuotolinio valdymo pultas - Kūginis lenkimo įrenginys: įrenginys, skirtas valcuoti kūgius ir trichtelius.