„Papro“ kėlimo stalai

Papro Heftafels

Sąlyga: naudotas, Gamybos metai: 2023, The machine is available for demonstration at our warehouse in Blomberg. Bdodpfxeumvnhs Admek Equipped with 1 HD pump Binks Maple 8/25 up to 175 bar and 4 units of Sames-Kremlin AVX Airmix spray guns. The machine features a changeover valve for rapid color changes, a lever switchable for up to 3 color circuits, and 1 cleaning agent pump (options available). The machine is supplied in ATEX (explosion-proof) specification. - Manufacturer: Ka-Ma - Model: KR BM 1000 B - Year of manufacture: 2023 - Working width: 1,200 mm (1,300 mm) - Spray gun drive: single version - Dry extraction - Belt conveyor system - Continuously variable feed speed: 2–8 m/min - With paint recovery system - Gun control: PLC, LS - Installed color circuits: 3 - Number of installed spray guns: 4 - Spray guns: Sames/Kremlin AVX, Airmix - Airmix spray system - Height-adjustable spray guns: 150 mm - Pumps manufacturer: Binks Maple 8/25, up to max. 175 bar - Including supply air filter ceiling - Suitable for both water-based and solvent-based paints - Exhaust air capacity: 12,000 m³/h - Length: 3,243 mm - Width: 3,482 mm - Height: 2,450 mm - Voltage/Frequency: 400 V / 50 Hz - Color: RAL 7035, light grey - Weight: 3,100 kg _____ Optionally, we can also offer installation and commissioning of the system, as well as operator training for your staff. On request, we also provide regular maintenance and servicing of the machine. For further information, please do not hesitate to contact us!

Gamybos metai: 2024, Sąlyga: naujas, Work area 1100 x 660 x 816 mm (W x D x H) Blasting chamber Dust-tight negative-pressure cabin in robust sheet steel construction Work gloves Special rubber, wear-resistant, inner lining cotton, securely attached to the cabin to prevent dust leakage Doors Blasting chamber W x D x H = 1100 x 660 x 816 mm Two side doors, dust-tight closure, double-walled, foam-filled for sound insulation, lockable, with electric safety cut-off Abrasive media recovery Via coordinated MHG recovery system Bdedsh Hxubspfx Admek Operation ON/OFF switch for extraction and lighting, pressure regulator, manometer, and foot switch Viewing windows

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2011, Wide-belt sander DMC USK 1350 M3 – Made in Italy – Cross-belt unit (so-called 'sergeant') – Year of manufacture: 2011 – Electric and pneumatic ionizer TECHNICAL SPECIFICATIONS: Sanding width: 1350 mm Sanding height: 4–170 mm Minimum workpiece length: 365 mm Vacuum table 1st unit: Cross-belt (so-called 'sergeant') Motor power: 12 kW 2nd unit: Rubber roller Hardness: 95 Shore Diameter: 240 mm Motor power: 18.5 kW 3rd unit: Rubber roller Hardness: 55 Shore Roller diameter: 300 mm Motor power: 15 kW Bdodpfxogr Er So Admek 4th unit: Pneumatic pad Motor power: 15 kW 5th unit – Cleaning brush – 2.2 kW 6th unit – Air blower Blower for the belt Pneumatic oscillation Feed speed: 2.5 – 18 m/min Pneumatic belt tensioning Electric height adjustment Extraction port diameters: 3 x 200 mm, 8 x 80 mm, 2 x 160 mm, 1 x 150 mm Transport dimensions (L/W/H): 370 / 250 / 250 cm Weight: 5000 kg

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, bendras ilgis: 2 000 mm, bendras plotis: 1 250 mm, bendras aukštis: 2 000 mm, įvesties srovės tipas: trifazis, įėjimo įtampa: 400 V, galia: 40 kW (54,38 AG), pjūklo disko skersmuo: 450 mm, ruošinio plotis (maks.): 300 mm, ruošinio aukštis (maks.): 30 mm, oro slėgis: 6 juosta, ištraukimo jungties skersmuo: 200 mm, honavimo skersmuo: 125 mm, ašies skaičius: 2, MARINUS PROMAX - Endenbearbeitungsmaschine und Fehlstellensäge. Die Maschine entspricht folgenden Spezifikationen: • Stabile und schwere Bauweise, Abmessungen LxBxH = 2080x1260x2000 mm. • Kontinuierliches Zuführsystem mit präziser Positionierung (Servoantrieb). • Pneumatische Seitenanschläge für garantiert rechtwinklige Ausrichtung. • SPS-Steuerung. • Bedienung über Terminal. • Modem zur Fernprogrammierung. • 2 Servomotoren für maximale Dynamik. • 2 Sägemotoren (3,0 kW). • 2 Hochgeschwindigkeits-Fräsmotoren mit Frequenzumrichter (je 7,5 kW / 200 Hz / n = 12.000). • 1 Getriebemotor mit Frequenzumrichter. • 2 Trommelmotoren. • 26 Pneumatikzylinder mit Ventilen. • 1 Lumineszenzsensor. • 6 Induktivsensoren. • Abfallbandförderer, Förderhöhe 1,3 m. • Maschine komplett durch Sicherheitstüren gekapselt. • Maschine entspricht CE-Vorschriften. Längenmesssystem: Ein Längenmesssystem zeigt während der Produktion die Gesamtlänge und die Quadratmeter der Bretter am Display an. Werkzeugausstattung: Wir bieten optional Werkzeuge (Nut- und Feder-Profilierung) mit Wendemessern und 2 Kappsägeblättern für die Maschine an. Standard-Programmierung: Bdsdoq Auhdspfx Admek Die Maschine ist mit 2 Hauptprogrammen ausgestattet: 1. Endenbearbeitung 2. Zuschnitt Beide Hauptprogramme verfügen über 2 Unterprogramme: 1. Variable Längen: Fehlstellen werden ausgeschnitten, Endprodukte haben variable Längen. 2. Fixlängen: Die Bretter werden auf eine feste Länge produziert, die Eingabelänge kann bis zu max. +200 mm übermaß betragen. Das Ausschneiden von Fehlstellen ist hierbei nicht möglich. • Min. Breite 60 mm • Max. Breite 300 mm • Min. Länge 500 mm • Max. Länge 6000 mm • Min. Stärke 10 mm • Max. Stärke 30 mm

Sąlyga: naujas, Load capacity: 30,000 kg Length: 8,000 mm Width: 2,500 mm Height: 790 mm Rear axle: steerable Bdjdefrzv Eepfx Admsk Front axle: steerable Tyre dimensions: 425 x 260 / twin configuration Machine weight: approx. 3.7 t Space requirement: approx. 9.9 x 2.5 x 0.8 m Heavy-duty trailer featuring: - Double steering - Tight turning radius - Tip-resistant due to steering angle limitation - Very robust, resulting in low maintenance requirements - Removable tow bar, length 1,320 mm - Impregnated wooden deck - Standard paint finish varies; custom RAL colours available on request. Other load capacities and dimensions available upon request. Please contact us.

Gamybos metai: 2024, Sąlyga: naujas, The world’s flattest timber frame assembly table = 3 cm! Delivered without timber boards. Text line break with the following specifications: Included components: - 1 double rail (zero stop) - 10 perforated rails - 10 rack-and-pinion clamps - 14 adjustable end stops - 14 interchangeable outside wall pressure plates - cordless impact driver - bit adapter - 50 dowels MMS 10x70/5 - hammer drill bit 8x165 Dimensions: Clamping length: 0 to 3,550 mm Hole grid: 140 mm With a board width of 1,250 mm = table length 12,350 mm Max. clamping force approx. 250 kg Clamp stroke: 340 mm End stop height: 100/160 mm Bjdjb Nrbnspfx Admsdk This assembly aid was developed to enable precise production of timber frame construction elements. Special attention was paid to space requirements and price. Thanks to the extremely flat design, the area can be repurposed for other uses simply by removing the clamps and stops. This is a significant advantage not just for small companies, but also for operations of all sizes. After creating a level surface, the clamping rails are aligned and anchored to the floor. The gaps are filled with a 30 mm thick timber board to be provided and installed by the customer. At the edges, approach ramps can be attached using the same boards. The resulting surface can be driven on by heavy vehicles or used as storage space. This means the area needed for timber framing is only activated when required. All steel parts are galvanised. Full assembly is carried out by the customer. After adjustment, the end stops must be pinned, otherwise they may be shifted by the force of the clamps. Packed in wooden crates, ready for EU shipping. Delivery free to your door within Germany. Made in Germany. For further technical data, please refer to the brochure.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2015, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: SK-K-24001, 1 optimized cross-cutting line with scanner Manufacturer: Dimter Model: OptiCut 450 Year of manufacture: 2015 Item no.: SK-K-24001 DIMTER cross-cutting system Bdedewya Syopfx Admjk with 1 x OptiCut 450 and feeding system F 100 featuring LuxScan CombiScan+ C 200 with curvature measurement The system was operational until 2024, has been professionally dismantled, and can be inspected in this condition.

Sąlyga: naudotas, Gamybos metai: 2007, No. 3177 Grecon Dimter OptiCut 200-1 Optimizing Cross-Cut System Used, year of manufacture: 2007 For cutting fixed lengths Wood dimensions to be processed: - Infeed lengths min./max. 3000 - 5000 mm - Infeed widths min./max. 80 - 200 mm - Infeed thicknesses min./max. 38 - 80 mm - Maximum wood cross-section: 200 x 50 mm - Final wood length min./max. 700 - 1000 mm - Average number of cuts per board: 5 - Types of wood: softwood or hardwood Machine performance: - Max. feed speed: 180 m/min, infinitely variable - Time per cutting operation incl. braking: 0.7 - 1.2 s Position overview: Pos. 1: Infeed conveyor belt, positioned before the saw - Length: 1.5 m, coupled with saw feed motor Pos. 2: Automatic cross-cut saw OptiCut 200-1, left-hand version - Equipped with integrated length measuring wheel and built-in waste air blast mechanism - Graphic input terminal, 1/4 VGA display, with numeric keypad and function keys, with OptiCom software package for system control - The machine is loaded from the left Pos. 3: Outfeed conveyor / sorting station - With drive unit, without ejector - Belt length approx. 1.5 m Machine already dismantled and stored - The infeed table was not used by the previous owner. Two feed rollers were mounted for material infeed. The feed table is available, only the rubber belt is missing. Bdedou Atmujpfx Admjk For sale on behalf of customer, ex-site Austria, without transport and assembly - Errors in description and price are reserved - Transport and loading by us optional To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended. Sale as-is Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer's brochure and previous owner, without guarantee - Subject to prior sale - For used machines, any guarantee/liability is excluded; 'sold as inspected' applies - Photos and videos are for reference only and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex location

Sąlyga: naujas, Gamybos metai: 2024, keliamoji galia: 1 500 kg, Perforated Table 1200 x 2400 x 200 mm Tabletop thickness: 20 mm, borehole diameter: 28 mm Swivel range: 360° Bdjdpfx Aer Uft Dsdmek Height adjustment: Hydraulic motor, 800 to 1200 mm Rotation speed: 0.5 rpm Motor power: 0.75 kW We offer tables in various sizes and load capacities: Load capacity 500 kg, dimensions 1000 mm x 1500 mm x 200 mm, 28 mm bores with manual or automatic height adjustment Load capacity 1000 kg, dimensions 1000 mm x 2000 mm x 200 mm, 28 mm bores with manual or automatic height adjustment Load capacity 1500 kg, dimensions 1200 mm x 2400 mm x 200 mm, 28 mm bores with manual or automatic height adjustment Load capacity 2000 kg, dimensions 1200 mm x 2400 mm x 200 mm, 28 mm bores with manual or automatic height adjustment Load capacity 3000 kg, dimensions 1200 mm x 2400 mm x 200 mm, 28 mm bores with manual or automatic height adjustment Load capacity 5000 kg, dimensions 1500 mm x 3000 mm x 200 mm, 28 mm bores with manual or automatic height adjustment

Sąlyga: nepatikrintas (naudotas), Maximum milling length: 400 mm Maximum milling width: 150 mm Maximum clamping thickness: 25 mm Hydraulic motor: 2.2 kW Bdedsk Tyrwjpfx Admjk 2 milling motors, each 2.2 kW Milling motor speed: 12,000 rpm Frequency converter: 8 kVA, 200 Hz Weight approx.: 1200 kg Output approx. 200 - 600 pcs/h, depending on shape and size