Universali frezavimo mašina

Panak FV-2

Sąlyga: naujas, Gamybos metai: 2025, Center height: 250 mm Spindle bore: 82 mm Distance between centers: 2000 mm Swing over bed: 500 mm Swing over gap: 710 mm Swing over cross slide: 300 mm Speed range: 9 - 1,600 rpm (24 steps) Spindle nose: DIN 55029 Camlock D1-8 Longitudinal feed range: 0.028 - 6.43 mm/rev; 93 steps Cross feed range: 0.012 - 2.73 mm/rev; 93 steps Metric threads: 0.5 - 224 mm; 48 steps Inch threads: 72 - 1/8 TPI; 49 steps Module threads: 0.5 - 112 mm; 42 steps Ppedpfed I A Aujx Ah Hol Diametral threads: 56 - 1/4 DP; 42 steps Quill diameter: 75 mm Quill stroke: 150 mm Quill taper: Morse taper 5 Motor power: 7.5 kW Weight: 2,950.00 kg Dimensions: 3,132 x 975 x 1,270 mm

Sąlyga: naudotas, Techniniai duomenys: Sukimosi skersmuo virš lovos: 560 mm Ppodpfx Ahowa I She Hsl Sukimosi skersmuo virš stumdomos dalies: 280 mm Sukimo ilgis: 2000 mm Centru aukštis: 280 mm Centru atstumas: 1600 mm Darbinio veleno skylė: 65 mm Sūkių diapazonas: 9...1800 / 24 žingsniai aps./min Išilginiai padavimai: 0,025-0,09 mm/apl Skersinis padavimas: 0,012-0,045 mm/apl Grąžto movos eiga: 225 mm Grąžto movos kūgis: MK5 Bendras energijos poreikis: 18 kW Apytikslis įrenginio svoris: 3,8 t Apytiksliai matmenys (IxPxA): 3,7 x 1,6 x 2,05 m Trijų žandikaulių griebtuvas D=320mm Viršutinė slankiojanti dalis pasukama 45° į dešinę ir į kairę

Sąlyga: labai geros būklės (naudotas), Workpiece diameter - max. 600 mm Thread length: 7000 mm Module - max. 8 / 12 Module - min. 1 Swivel range: ° Cutter diameter: 63 - 140 mm Spindle speeds - stepless: 45 - 450 rpm Machine weight approx. 12.5 t Space requirement approx. 9.0 x 2.0 x 2.2 m Condition: Well maintained, checked and partially overhauled by a specialist workshop. The existing milling head was replaced with an overhauled universal milling head. Equipment: Differential for oblique machining Automatic indexing device (indexing plates interchangeable!) for multi-keyed, multiple-start parts, plus extensive bushings, support rollers, and about 70 change gears. Conversion of milling head speed to a frequency converter with a correspondingly powerful motor is a great feature and saves a lot of setup time. Accessories: Ppedpewgizdjfx Ah Hjl About 70 change gears, 3 bushing setting tools of various sizes, about 20 bushings, 2 roller holders, 2 centers for direct mounting on the clamping spindle, 350 mm chuck, 2 spare index plates.

Sąlyga: naudotas, Funkcionalumas: neveikiantis, Frezarka Adcock-Shipley. NIEFUNKCJONUJĄCA jednostka!!! Dobra kondycja mechaniczna, brak elektroniki. Możemy przeprowadzić remont urządzenia za dodatkową opłatą. Prosimy również o zapoznanie się z naszymi pozostałymi ogłoszeniami. Ppodpfx Aher Dvqpj Hel

Sąlyga: naudotas, Gamybos metai: 1970, Stūmoklio eiga – maks. 250 mm Podpfx Aexu Nq Sjh Hspl Išsikišimas: 250 mm Stalo skersmuo: 350 mm Stalo išilginis eigas: 200 mm Stalo skersinis eigas: 500 mm Atstumas stalviršis – apatinė stūmoklio dalis: 300 mm Dvigubų taktų/min: 15–160 /min Bendras galios poreikis: 1,7 kW Mašinos svoris apie 1,7 t Su priedais!

Sąlyga: geras (naudotas), Used hydraulic shear SCHIAVI, model GH540A Maximum cutting length: 4040 mm Cutting thickness: 5 mm Motorized backgauge travel: 1000 mm Side throat: 500 mm Strokes per minute: 20–55 Cutting angle adjustment: 0° 29” – 1° 14” Manual blade clearance adjustment Three-phase voltage: 380V Main motor power: 9 kW Overall dimensions: 4570 mm (L) x 2310 mm (W) x 1705 mm (H) Psdoqfc Imspfx Ah Hepl Approximate weight: 11,000 kg In good condition, available for inspection

Sąlyga: naudotas, Gamybos metai: 2006, Parduodamas: LBL Brente medienos transportavimo vežimėlis su žieve staklėmis – pagaminimo metai 2006 Psdpfsx Ndpbsx Ah Hspl Parduosime visą seriją įrenginių iš medienos pjovimo cecho. Tai yra pirmasis šios serijos įrenginys – stebėkite mūsų svetainę dėl kitų pasiūlymų. Matmenis ir techninius duomenis rasite PDF dokumentuose.

Sąlyga: naujas, Gamybos metai: 2025, Our ZX7045 B1 milling-drilling machine is designed for drilling, tapping, reaming, boring, and enlarging holes up to 45/40 mm in cast iron, and tapping up to M12 mm. The ZX7045 B1 version is equipped as standard with an automatic spindle feed and an efficient cooling system, providing not only excellent performance but also optimal working conditions. With a milling capacity up to 80 mm in width, keyway milling up to 22 mm, as well as the ability to perform end and face milling operations, this milling-drilling machine becomes an indispensable tool for a wide range of applications. Product features: - HEAVY DUTY STABLE CAST IRON BODY - AUTOMATIC SPINDLE FEED - MILLING HEAD HEIGHT ADJUSTABLE ON THE SUPPORT, NOT THE COLUMN - ADDITIONAL LIQUID COOLING - ROBUST CROSS TABLE WITH PRECISION-GROUND SURFACE - DOVETAIL GUIDES - QUIET OPERATION THANKS TO GROUND GEARS - LEFT AND RIGHT ROTATION - SWIVEL HEAD +/- 90° - ADJUSTABLE HEAD HEIGHT - Machine base available as an optional accessory TECHNICAL DATA: DRILLING CAPACITY IN STEEL: 32 mm DRILLING CAPACITY IN CAST IRON: 45 mm FACE MILLING CUTTER DIAMETER: 80 mm END MILL CUTTER DIAMETER: 28 mm SPINDLE SPEEDS: 50, 95, 100, 180, 190, 355, 360, 655, 710, 1260, 1310, 2520 rpm (6/12) SPINDLE TAPER: MT 4 SPINDLE TRAVEL: 125 mm (AUTOMATIC FEED) WORKTABLE DIMENSIONS: 820 mm x 240 mm BASE DIMENSIONS: 580 x 600 mm MAX. DISTANCE SPINDLE TO TABLE: 445 mm DISTANCE SPINDLE TO COLUMN SURFACE: 260 mm TRAVEL X/Y/Z: 515/175/430 mm QUILL FEED RATE: 0.12; 0.18; 0.25 mm/rev HEAD SWIVEL RANGE LEFT/RIGHT: 90° Ppjdpfjvxth Hox Ah Hel MOTOR POWER: 1.8kW / 2.5HP POWER SUPPLY: 400 V WEIGHT: 350 kg

Sąlyga: labai geros būklės (naudotas), X-axis travel 450 mm Y-axis travel 175 mm Z-axis travel 400 mm Spindle speeds 60 – 2800 rpm Ppedpfxsvwgn De Ah Hel Machine weight approx. 1 t Space requirements approx. 1.1 x 1 x 1.5 m The milling machine is in very good, well-maintained condition.

Gamybos metai: 1964, Sąlyga: naudotas, FREZAVIMO STAKLĖS Pedpfx Ahox Dzbbo Hspl