Presas

Packstation Bergmann PS 1400

Gamybos metai: 1982, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: 14320, Baler / Paper Baler Iedpjiuky Ijfx Af Ijal

Gamybos metai: 2021, Sąlyga: beveik kaip naujas (parodų įrenginys), Overband Plate Magnet Design in stainless steel 1.4301, hermetically welded including cleaning drawer 800 x 500 x 180 mm Iajdpfx Aed Evl Djf Isl fully welded housing lifting eyes for suspension

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2012, veikimo valandos: 25 895 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 78 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 500 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 600 kg, bendras svoris: 24 000 kg, alyvos bako talpa: 1 000 l, galia: 55 kW (74,78 AG), tūrio srautas: 930 m³/val, Technical Data – Baler: Manufacturer: Presona AB Model: LP 80 VHK 1 Year of Manufacture: 2012 Total Operating Hours (Machine): 25,895 hours (as of July 2025) Effective Operating Hours (Pump): 14,135 hours (as of July 2025) Number of Bales Pressed: 235,597 (as of July 2025) Main Pressing Force: 78.5 t Specific Pressing Force: 95 N/cm² Pre-Press Force: 28 t Press Chamber Volume: 2.7 m³ Feed Opening Dimensions: 1,500 x 1,100 mm Theoretical Throughput: 930 m³/hour Throughput Under Operating Conditions: 410 m³/hour Bale Dimensions: 750 x 1,100 mm Drive Power: 55 kW Tying: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at Bulk Density of: - 30 kg/m³: approx. 9 to 12 t/hour (material dependent) - 50 kg/m³: approx. 14 to 17 t/hour (material dependent) - 100 kg/m³: approx. 16 to 25 t/hour (material dependent) Throughput at MSW (Municipal Solid Waste): approx. 20 to 27 t/hour (material dependent) Bale Weights: 450 to 600 kg (depending on material and bale length) Hydraulic Oil Tank Volume: 1,000 L Baler Dimensions (assembled with hopper): 10,985 x 3,750 x 4,310 mm (L x W x H) Transport Dimensions (baler only): 10,985 x 2,300 x 2,900 mm Machine Weight (baler): approx. 24 t Condition of the Baler: The machine was partially overhauled and serviced in our workshop and, upon completion of the work, tested in both manual and automatic modes during operation. The following overhaul work was carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank completely drained and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram dismantled and cleaned - All four running rollers removed from the press ram and replaced - Twisting wire station with lower wire deflection pulleys cleaned and made operational - Side guides of press ram removed, smoothed, re-installed, and re-adjusted - Main hydraulic cylinder dismantled and disassembled for inspection - Piston rod replaced, cylinder tube honed - Complete seal set replaced, pressure test carried out - Hydraulic hose of main hydraulic cylinder replaced - Vertical and horizontal needle systems for tying dismantled, cleaned, wire deflection pulleys made operational and serviced - Chain cleaned, lubricated, chain tension readjusted - Drillomat cleaned, wire cutters, twisting shafts, and twisting fingers checked, retightened with appropriate torque, and serviced - Door contact switch checked and partly replaced - Emergency stop switch checked - Complete electrical wiring checked and partly renewed - Bearings of the wire guide rollers under the press replaced Iasdpfx Afevwlqqj Iol - New safety guards for vertical and horizontal tying manufactured and installed - Machine inspected, general maintenance performed, and baler tested in manual and automatic mode Scope of Delivery: Only the baler is being sold. Remarks: Full documentation is available (operating manual, CE declaration, electrical/hydraulic circuit diagram). Inspection by appointment is possible. No liability is assumed for technical specifications or possible errors.

Sąlyga: naudotas, Gamybos metai: 2003, Technical Details: Pressure: 40 t Box opening: 1200 x 730 mm Material: Cardboard, plastic – cardboard bottles Voltage: 400 / 50 V / Hz Total power requirement: 16.4 kW Transport dimensions (machine): 6.5 x 6.2 x 2.7 m Fully automatic hydraulic CHANNEL BALER for recycling with feed unit/conveyor belt LxW: 4500x1000 mm, motor-driven with automatic 3-fold tying unit Bale counter/indicator Iajdpfx Aeu Nw Ezsf Iol Press chamber LxWxH: 1800x800x800 mm with 1.2 m³ volume Bale size LxWxH: 300–1500 x 800x800 mm Bale weight: 250 – 450 kg depending on material and bale length Filling opening LxW: 1200x730 mm, filling height 1200 mm Hopper size LxWxH: 1200x1200x1400 mm; filling height 2500 mm

Sąlyga: naujas, Gamybos metai: 2024, Hacker blades 40 x 40 concave Blades for Weima, Gross ... Suitable for almost all common chippers/shredders Available from stock in Bitburg Iaedpobxu Dhsfx Af Isl Subject to prior sale

Gamybos metai: 2006, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: 1452, Bedienpult mit Display Iaedpfok Izqtsx Af Iol

Sąlyga: naujas, - Motor power 9 kW - PLC-controlled operation, two-hand safety control - Cutting force 35 tons - Straight design splitting table - Cutting channel: - max. blade length L= 2000 mm Ijdpfx Afsd Hf Tdo Isal - max. opening H= 1200 mm - Machine weight approx. 4 tons - Hand protection guard in the operator panel area and on the opposite side - Forklift insertion shoes included (for easy transport of the machine by forklift) In stock – available immediately Price and further information on request

Sąlyga: naujas, Gamybos metai: 2024, Consisting of Large Bale Breaker Type MHB and Straw Shredder Type MHZ 1) Bale Breaker MHB: Special price from €22,975 net (Production time approx. 15 weeks) Suitable for round or square bales. Includes frequency converter (FU) – this controls the speed of the drag floor. Iajdpfjb Nulhsx Af Isl Bales are placed on the drag floor and the cutter head’s feed is activated. The tines on the cutter head tear the straw from the bale and throw it into the hopper. Ideally, a combination of bale breaker and straw shredder is recommended here. Technical Data – Bale Breaker: Capacity: 1–2 bales per hour Up to max. 600 kg per hour (depending on screen size used in the straw mill, kW of the straw mill). Without the straw mill, the bale breaker can even dissolve up to max. 900 kg/h of straw. Max. size of square bales: 2400 x 1200 x 800 mm (L x W x H) Cutter head motor: 5.5 kW, 380 Volt Drag floor feed: 0.75 kW, 380 Volt Dimensions: 3750 x 1730 x 2460 mm (L x W x H) Weight: 400 kg 2) Straw Shredder MHZ 600 – 11/15 kW; available immediately Special price from €6,995 net Extra charge for larger straw shredder (18.5 kW) + €3,940 net Technical Data, MHZ with Special Hopper: Motor: 15 kW, 380 Volt electric Diameter: 600 mm Hardened cutting blades Screen with interchangeable inserts (options: 10, 12, 15, 22, 30, 45 mm hole size) With star-delta switch, overload protection, and 8m supply cable ready to plug in Discharge spout: 160 mm Blowing distance approx. 12 m Dimensions: approx. 1600 x 1020 x 1360 mm (L x W x H) Weight: approx. 240 kg --- Options at Extra Cost: Feed auger + €970 net Cyclone (to be mounted by customer; should be max. 10 m away) + €2,970 net Simple filter €1,750 net --- Further Options: Industrial extraction system (demonstration unit) + from €9,950 net Optional with rotary valve (for pressureless material discharge) + €5,750 net Control system: from €1,620 net Special dissolver extension 3 m (other dimensions on request) + €9,750 net Briquetting press MPP 180 S; lightly used demo unit 70 mm briquette – up to max. 100 kg/h from €39,700 net * Larger machines available on request --- Description: The muetek bale breaker was developed for loosening round and square bales of hay and straw. The shredder attached to the bale breaker processes straw from all types of grain, hay, corn, and miscanthus. muetek machines of the MHZ/MHB series are characterized by a robust design and a heavy-duty construction. muetek bale breakers of the MHB series are equipped with a chain conveyor on which the straw bale is placed using a front loader. The support can be adjusted according to the type of bale. The chain conveyor feeds the bale against the milling rotor; the feed speed is adjustable. The milling rotor is equipped with several teeth that tear apart the straw bale. The separated straw is discharged. --- As a rule, the machines are suitable for dry input materials: - Straw - Hay --- The processing of hemp is only possible with a special dissolver. Extra cost approx. €9,720 net, depending on version. The shredder cannot process hemp with the straw mill. Requirements for the input material: Maximum moisture content 12%.

Sąlyga: naujas, Gamybos metai: 2025, Variklio galia 7,5 kW - Pjovimo jėga 30 t Pjovimo kanalas skirtas - maks. ritinio ilgis 1500 mm - maks. ritinio skersmuo 850 mm - Mašinos svoris apie 3500 kg - Bakelio talpa apie 110 litrų - Rankų apsauginė grotelė valdymo pulto zonoje ir priešais jį - Peilio užraktas Isdpfx Aegl Adzof Ijal - Skaldymo stalas tiesus - Dokumentacija vokiškai 2 egz. (1x tekstinė forma, 1x CD) - Dažymas RAL 5012 - šviesiai mėlyna Apsauginė grotelė/peilio sijos RAL 1028 melioninė geltona Mašina sandėlyje, galima nedelsiant Kaina ir daugiau informacijos pagal užklausą

Sąlyga: geras (naudotas), Gamybos metai: 1987, Manufacturer Type: PS 8100 Height: 2,200 mm Width: 1,200 mm Length: 1,625 mm Loading height: 1,900 mm Weight: 800 kilograms Rated current at 400 V: 4.8 A Transformer rated current at 230 V: 0.38 A Iasdpfx Afok E Hh Ss Iol Motor power: 2.2 kW Fuse: 10 A, slow-blow Rotation: 13 rpm Protection class: IP 54 Fire class: D, E Hydraulic oil: HLP 32 Bale weight (depending on material): 150–400 kg Bale volume: 1 m³