Paal juostinis konvejeris KES 1750

Paal KES 1750

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2007, veikimo valandos: 22 605 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 100 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 600 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 1 100 mm, balo svoris: 1 400 kg, bendras svoris: 36 000 kg, alyvos bako talpa: 1 300 l, paskutinio kapitalinio remonto metai: 2025, For sale is a refurbished baler with 100 t pressing force, large format 1100 x 1100 mm, 75 kW drive power, and a 10-fold cross-tying system. Technical Data – Baler: Lrjdpfx Ahjvf E Avj Ujl Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main press force: 100 t Prepress force: 50 t Operating hours: 22,605 h Feed opening dimensions: 1,600 x 1,100 mm Filling volume per press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale dimensions: 1,100 x 1,100 mm Drive power: 75 kW Connected load: 126 kW Total current consumption: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput rates at a Bulk density of 30 kg/m³: approx. 16 t/h Bulk density of 50 kg/m³: approx. 25 t/h Bulk density of 100 kg/m³: approx. 47 t/h Bale weights up to 1,400 kg, depending on material and bale length Oil tank capacity: approx. 1,300 l PLC: Telemecanique TSX Micro Operator panel: Schneider MAGELIS Touch Baler dimensions assembled with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions baler only: 11,765 x 2,500 x 3,450 mm (L x W x H) Machine weight baler: approx. 36 t Remarks: The baler has been partially refurbished, serviced in our workshop, tested after completion, and stored. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment works have been carried out: - Derusting and partial repainting of the baler - Complete draining of the hydraulic oil tank, replacement of oil and air filters - Refilled with new hydraulic oil - Replaced all hydraulic hoses - Disassembled, overhauled, and reassembled main hydraulic cylinder, two pre-press flap cylinders, and channel press cylinder: honed cylinder tubes, renewed all seal kits, and carried out final pressure test - Dismantled pre-press flap with bearings and bearing brackets. Removed and re-welded 1st and 3rd arc segment - Renewed both bearings on pre-press flap shaft - Renewed upper material retainer on pre-press flap frame - Dismantled the press ram, inspected and replaced both front running wheels - Removed and replaced material retainers and wear profiles on sides and bottom of the press ram - Dismantled, overhauled horizontal and vertical needle and tying units, replaced plastic sliding plates, bearings for twister shafts and wire guide pulleys on the needle heads - Replaced both bronze slide rails left and right in press ram frame cover - Renewed both wire redirect units left and right, incl. bale retention clamps - Fully renewed wire feeding unit incl. hydraulic cylinder under the needle passages - Welded and smoothed out wire grooves on the bottom and side walls of the press channel - General maintenance and service work according to manufacturer’s recommendations - Baler tested in both manual and automatic mode after completion of refurbishment, accepted and stored All technical information is provided without liability for errors or omissions.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: HBC 140 2x75kW 2001 (210-008-01), spaudimo jėga: 155 t, balo svoris: 1 500 kg, slėgis: 250 juosta, galia: 150 kW (203,94 AG), paskutinio kapitalinio remonto metai: 2024, Įranga: dokumentacija / vadovas, Verkocht door Bollegraaf Recycling Solutions, de originele fabrikant van deze Bollegraaf-pers en transportband: Bollegraaf HBC140s Pers (2x75kW) Pers: Gewicht: 47.100 kg Bouwjaar: 2001 Variabele kanaaldrukregeling Kunststofklep Anti-ratten bekabeling Urenstand 0 na volledige revisie Deze pers wordt volledig gereviseerd verkocht volgens de ‘Bollegraaf OEM Certified Refurbishment Standards’. Dit omvat 2 jaar garantie. Neem contact met ons op voor meer informatie of een offerte. Algemene principes van de revisie Reiniging & demontage Voorafgaand aan de daadwerkelijke revisie wordt de pers volledig gereinigd en in onze revisiewerkplaats gedemonteerd. Toleranties Na demontage worden de toleranties van alle stalen componenten gemeten en waar nodig opnieuw gelast. Dit geldt ten minste voor de volgende onderdelen: • Presschuif, Lredpfx Ahjtvau Ae Ujl • Frame, • Perskanaal, • Voorpersklep Na demontage en inspectie wordt de presschuif opnieuw opgelast en voorzien van nieuwe schuifwielen. De beschermroosters en de voorpersklep worden deukvrij gemaakt en waar nodig gerepareerd. Opnieuw gespoten Na het meten van de toleranties en eventuele reparatie- en laswerkzaamheden, worden alle componenten gestraald en opnieuw gecoat. Hydrauliek: De hydrauliektank wordt gereinigd. De hydrauliekleidingen en slangen worden vervangen. De hydraulische componenten worden opnieuw voorzien van pakkingen. De hydrauliekolie wordt ververst. Bekabeling: Alle bekabeling wordt gecontroleerd en indien nodig vervangen. Alle aansluitdozen worden vervangen en opnieuw op goed toegankelijke posities geplaatst. Slijtagedelen: Alle slijtdelen worden vervangen. De pennen en assen van de cilinders en het perskanaal worden vernieuwd. Alle slijtdelen van beide naaldinstallaties en knopers worden vervangen voor nieuwe. Cilinders: De cilinders worden opnieuw voorzien van pakkingen en indien nodig voorzien van een nieuwe chroomlaag of een nieuwe cilinderstang. MCC kast De schakelkast wordt gecontroleerd en gereinigd. Indien nodig worden elektronische componenten vervangen door nieuwe. De PLC en HMI (bedieningsinterface) worden vervangen door de nieuwste Schneider M340-versie inclusief de meest recente software.

Būklė: paruoštas naudoti (naudotas), DIXI 60SLD is a semi-automatic baling system with a pressing force of 60 tons, designed for the economical reduction of recyclable material volumes in industrial and commercial applications: - Cardboard boxes - Foams - PET bottles - Insulation mats - and other pressable materials. DIXI 60 SLD horizontal baler, waste baler with tilting device Technical specifications: Ledpfx Ahera A E Uo Uerl - Pressing force: 60 tons - Specific pressure: 6.81 kg/cm² - Power supply: 400V / 7.5kW - Bale dimensions: 800 x 1100 x 1200 mm - Number of bindings: 3 - Bale weight: approx. 370-410 kg - Binding: manual - Feed opening: 990 x 1110 mm - Machine weight: 5,420 kg - Average press cycle: 47 sec - Year of manufacture: 2011-2016 Dixi 80SLD Baler Technical data: - Make: Dixi - Model: 80 SLD - Pressing force: 80 tons - Drive power: 11 kW, 400 V / 32 A - Hopper opening (W x H): 1040 x 1110 mm - Press cycle: approx. 35 s - Throughput: approx. 1,000 kg/h - Bale size (W x H x L): 1120 x 1120 x 1200 mm - Bale weight: depending on material approx. 500–600 kg - Bale binding: triple, manual - Machine dimensions: - Length: 4,200 mm (+ cage 1,600 mm) - Width: 1,830 mm - Height: 2,620 mm - Machine weight: approx. 8,000 kg - Automatic bale ejection - Robust construction for long-term use - Year of manufacture: 2016-2020 - Weight: approx. 8.4 tons - Condition: Used

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2003, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: W230-028, spaudimo jėga: 80 t, garantijos trukmė: 24 mėnesiai, slėgis: 250 juosta, galia: 45 kW (61,18 AG), paskutinio kapitalinio remonto metai: 2024, Įranga: dokumentacija / vadovas, This fully refurbished baler is being sold by Bollegraaf Recycling Solutions. It concerns a HBC80 baler (45 kW) with vertical tying. This baler has already been completely overhauled in our refurbishment workshop. The refurbishment is carried out according to the very strict Bollegraaf OEM Refurbishment Guidelines. After refurbishment, this baler is sold including 2 years warranty. This press is supplied with the following options: * Mounting frames * Intermediate hopper * Bale outlet Lsdpfx Astvat Teh Usrl * Wire spool platforms

Būklė: labai geros būklės (naudotas), Gamybos metai: 2014, veikimo valandos: 37 656 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 85 t, pildymo angos plotis: 1 500 mm, pildymo angos ilgis: 1 100 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 650 kg, bendras svoris: 25 000 kg, alyvos bako talpa: 1 000 l, paskutinio kapitalinio remonto metai: 2024, tūrio srautas: 410 m³/val, transporto plotis: 2 400 mm, transporto ilgis: 9 300 mm, Good day, We hereby offer you, subject to prior sale, a used baler from the manufacturer Presona AB, type LP 85 VH1. The following technical data has been taken from the manufacturer’s operating manual and brochures, for which we cannot guarantee the accuracy or completeness. Manufacturer: Presona AB, Sweden Type: LP 85 VH1 Year of manufacture: 2014 Total operating hours: 37,565 hours (as of March 25) Main press force: 85 t Specific pressing force: 100 N/cm² Pre-press flap force: 28 t Lrodpsv T I Evjfx Ah Ujl Feed hopper dimensions: 1,500 x 1,100 mm Filling volume per cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Strapping: 5-fold vertical Hydraulic oil tank volume: 1,000 L Press dimensions: 10,350 x 2,400 x 3,150 mm (L x W x H) Press weight: approx. 25 t Note: The machine was used in a recycling facility for compacting paper, cardboard, foils, and plastics such as bottles, buckets, canisters, and drums. The baler is in good condition. Many wear parts and entire assemblies have already been renewed over the last three years. The machine has been serviced regularly. We would be pleased if this baler is of interest to you. Your Mertens & Frowein GmbH Service Team

Būklė: Defektas atsarginių dalių laikiklis (naudotas), Gamybos metai: 2013, Manufacturer: HSM Model: HL 4010 Li Year of manufacture: 2013 The equipment is incomplete and is being sold for parts. Defects: Hydraulic pump missing Lredpfx Aeur Raveh Uol Control unit missing Power supply missing

Gamybos metai: 2020, būklė: labai geros būklės (naudotas), buffer hopper with conveyor belt inside, equipped with a dosing auger at the front, length 9 meters, width 2 meters Lrsdpfx Aeilqfqjh Usl

Būklė: naujas, Roll splitter RGS20 Motor power: 7.5 kW Cutting force: 20 tons Cutting channel designed for: - max. roll length: 1100 mm - max. roll diameter: 900 mm Machine weight: approx. 2500 kg Lrjdpjq A Turefx Ah Uel Tank capacity: approx. 100 liters - Body color RAL as per customer request Protection grid/cutter beam RAL 1028 melon yellow Made to order Price and further information on request

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, Baler BTS-MF75 in stock and available for immediate delivery The BTS-MF75 is the ideal baler for compacting your loose cardboard and film waste into bales weighing up to 75 kg. With an additional pressing insert, it is also suitable for compressing individual metal and plastic containers as well as cans. The baler impresses with its simple and safe operation and large loading volume. By compacting these waste and recyclables, you achieve a volume reduction of up to 90%, significantly lower your disposal costs, and ensure proper return of the material to the recycling loop. Pressing force: 3.5 tons Bale weight: up to 75 kg (depending on material) Bale size: 1000 H (variable) x 700 W x 500 D mm Machine dimensions: 2335 H x 1040 W x 750 D mm Machine weight: 278 kg Transport height: 2335 / 1800 mm (if required) Loading opening: 700 W x 698 H mm Pressing cycle: 24 seconds Motor: 1.5 kW, 13 Amp Power supply: 230 V (single phase) Noise emission: 68 dB User-friendly lever operation Bale trolley for easy removal of bales Retainer to reduce material spring-back Strapping holder A quality product 'Made in Europe' Suitable for compacting: Cardboard Film Lrsdpfx Ajvah S Aoh Usl Cans and lightweight metal containers Canisters and lightweight plastic containers Textiles Lightweight recyclables Additional options: Annual maintenance with safety inspection (UVV) Machine colour selectable according to RAL Can pressing insert PLC control with automatic press cycle, bale-ready signal, and key-operated E-stop Belt bale ejector + PLC (instead of bale trolley) Strapping bands Power supply 380 – 400 V (three phase) Baler, paper baler, waste paper baler, cardboard baler, cardboard box baler, film baler, paper bale press, waste baler, waste press, recycler press, waste compactor, refuse press, residual waste press

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, The BTS-MF500LH is the ideal baler for compacting your loose cardboard and film waste into bales weighing up to 500 kg. Due to its compact design, it is particularly suitable for areas with limited ceiling height. The baler impresses with its user-friendly and safe operation as well as its large feed opening. By compacting these waste and recyclable materials, you achieve a volume reduction of up to 90%, significantly reduce your disposal costs, and ensure the material is properly returned to the recycling loop. Pressing force: 50 tonnes Bale weight: up to 500 kg (depending on material) Bale size: 1100 H (var.) x 1400 W x 800 D mm Machine dimensions: 2249 H x 2041 W x 1350 D mm Machine weight: 2100 kg Transport height: 2249 mm Filling opening: 1400 W x 680 H mm Pressing cycle time: 35 seconds Motor: 11 kW, 32 Amp Power supply: 380 - 400 V (3-phase) Noise level: 68 dB PLC control with automatic press cycle, bale-ready indicator, and emergency stop with key Strap bale ejector for easy removal of bales Retainer claws to minimize material spring-back Low overall height, perfect for low-clearance areas Operating hours counter Holder for 6 rolls of strapping tape A quality product “Made in Europe” Lrjdpfovugzfsx Ah Usl Suitable for compacting: Cardboard Film Big Bags Cans and PET bottles Light recyclables Additional options: Annual maintenance with UVV inspection Custom machine color according to RAL Strapping tapes Baler, paper baler, waste paper baler, cardboard baler, cardboard compactor, film baler, paper bale press, waste baler, waste compactor, recyclable press, refuse compactor, bin press, residual waste baler.