Presas

Bollegraaf HBC 50A

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2012, veikimo valandos: 25 895 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 78 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 500 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 600 kg, bendras svoris: 24 000 kg, alyvos bako talpa: 1 000 l, galia: 55 kW (74,78 AG), tūrio srautas: 930 m³/val, Technical Data – Baler: Manufacturer: Presona AB Model: LP 80 VHK 1 Year of Manufacture: 2012 Total Operating Hours (Machine): 25,895 hours (as of July 2025) Effective Operating Hours (Pump): 14,135 hours (as of July 2025) Number of Bales Pressed: 235,597 (as of July 2025) Main Pressing Force: 78.5 t Specific Pressing Force: 95 N/cm² Pre-Press Force: 28 t Press Chamber Volume: 2.7 m³ Feed Opening Dimensions: 1,500 x 1,100 mm Theoretical Throughput: 930 m³/hour Throughput Under Operating Conditions: 410 m³/hour Bale Dimensions: 750 x 1,100 mm Drive Power: 55 kW Tying: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at Bulk Density of: - 30 kg/m³: approx. 9 to 12 t/hour (material dependent) - 50 kg/m³: approx. 14 to 17 t/hour (material dependent) - 100 kg/m³: approx. 16 to 25 t/hour (material dependent) Throughput at MSW (Municipal Solid Waste): approx. 20 to 27 t/hour (material dependent) Bale Weights: 450 to 600 kg (depending on material and bale length) Hydraulic Oil Tank Volume: 1,000 L Baler Dimensions (assembled with hopper): 10,985 x 3,750 x 4,310 mm (L x W x H) Transport Dimensions (baler only): 10,985 x 2,300 x 2,900 mm Machine Weight (baler): approx. 24 t Condition of the Baler: The machine was partially overhauled and serviced in our workshop and, upon completion of the work, tested in both manual and automatic modes during operation. The following overhaul work was carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank completely drained and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram dismantled and cleaned - All four running rollers removed from the press ram and replaced - Twisting wire station with lower wire deflection pulleys cleaned and made operational - Side guides of press ram removed, smoothed, re-installed, and re-adjusted - Main hydraulic cylinder dismantled and disassembled for inspection - Piston rod replaced, cylinder tube honed - Complete seal set replaced, pressure test carried out - Hydraulic hose of main hydraulic cylinder replaced - Vertical and horizontal needle systems for tying dismantled, cleaned, wire deflection pulleys made operational and serviced - Chain cleaned, lubricated, chain tension readjusted - Drillomat cleaned, wire cutters, twisting shafts, and twisting fingers checked, retightened with appropriate torque, and serviced - Door contact switch checked and partly replaced - Emergency stop switch checked - Complete electrical wiring checked and partly renewed - Bearings of the wire guide rollers under the press replaced - New safety guards for vertical and horizontal tying manufactured and installed Hfodpfxsvwlqqe Af Ijb - Machine inspected, general maintenance performed, and baler tested in manual and automatic mode Scope of Delivery: Only the baler is being sold. Remarks: Full documentation is available (operating manual, CE declaration, electrical/hydraulic circuit diagram). Inspection by appointment is possible. No liability is assumed for technical specifications or possible errors.

Sąlyga: naudotas, Gamybos metai: 2003, Technical Details: Hfsdpfxju Nw Eze Af Ijb Pressure: 40 t Box opening: 1200 x 730 mm Material: Cardboard, plastic – cardboard bottles Voltage: 400 / 50 V / Hz Total power requirement: 16.4 kW Transport dimensions (machine): 6.5 x 6.2 x 2.7 m Fully automatic hydraulic CHANNEL BALER for recycling with feed unit/conveyor belt LxW: 4500x1000 mm, motor-driven with automatic 3-fold tying unit Bale counter/indicator Press chamber LxWxH: 1800x800x800 mm with 1.2 m³ volume Bale size LxWxH: 300–1500 x 800x800 mm Bale weight: 250 – 450 kg depending on material and bale length Filling opening LxW: 1200x730 mm, filling height 1200 mm Hopper size LxWxH: 1200x1200x1400 mm; filling height 2500 mm

Sąlyga: naudotas, Gamybos metai: 2011, Trijų peilių kirptuvas Wohlenberg Trim-Tec 45i Pagaminimo metai: 2011 Aprašymas: Hodpfewpfv Ajx Af Isfb - Skaitmeninis ekranas - Įvedimas iš dešinės pusės - Automatinis žurnalas darbui linijoje - Keičiamos pjovimo kasetės (standartinis komplektas) - Peilių išankstinio reguliavimo įrenginys - Peilių laikiklių komplektai: 2 - Iš viso peilių komplektų: 2 (be atliekų išvežimo transporterio)

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2007, veikimo valandos: 21 676 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 78 t, pildymo angos plotis: 750 mm, pildymo angos ilgis: 1 500 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 600 kg, bendras svoris: 25 000 kg, transporto aukštis: 3 000 mm, alyvos bako talpa: 1 000 l, galia: 55 kW (74,78 AG), tuščias svoris: 25 000 kg, tūrio srautas: 930 m³/val, darbinis slėgis: 250 juosta, Good day, We hereby offer you, subject to prior sale, a used baler from manufacturer Presona AB, type LP 80 VH1. The following technical data has been taken from the operator’s manual and manufacturer brochures. We cannot accept any liability for the accuracy or completeness of this information. Manufacturer: Presona AB, Sweden Type: LP 80 VH1 Year of manufacture: 2007 Total operating hours: 21,676 hours, as of November 2024 Main press force: 78 t Specific press force: 95 N/cm² Pre-press flap force: 28 t Feed hopper dimensions: 1,500 x 1,100 mm Filling volume / press cycle: 2.7 m³ Throughput capacity under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying: 5-fold vertical Hydraulic oil tank volume: 1,000 L Press dimensions when assembled with hopper: 10,985 x 3,750 x 4,310 mm (L x W x H) Machine weight (press only): approx. 25 t Note: Hedpjvgrh Uefx Af Iofb The machine was used in a recycling operation for compacting paper, cardboard, and film. The baler is in good condition, will remain in operation until January 2025, and can be inspected by appointment. We would be pleased if this machine is of interest to you. Your service team at Mertens & Frowein GmbH

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, The BTS-MF200MK is the ideal multi-chamber baler for compacting your loose cardboard and film waste into a bale weighing up to 200 kg. Different materials can be collected in two or more press chambers arranged side by side. Once a chamber is filled, the mobile press head is rolled over and the material is compressed. By compacting these waste/recyclable materials, you achieve a volume reduction of up to 90%, significantly reduce your disposal costs, and properly return the material to the recycling cycle. Pressing force: 16 tons Bale weight: up to 200 kg (depending on material) Hjdpfx Asvugz Ejf Ijfb Bale size: 1000 H (var.) x 1100 W x 800 D mm Machine dimensions: 2506 H x 3260 W x 1269 D mm Machine weight: 1,400 kg Transport height: 2506 mm Feed opening: 1100 W x 800 H mm Pressing time: 34 seconds Motor: 2.2 kW 16 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB User-friendly lever operation Bale ejector for removing the bales Return retainers to minimize material spring-back Short handling time as one chamber is always free for loading Holder for strapping bands A quality product “Made in Europe” Suitable for compacting: Cardboard Films Big bags Textiles Light recyclables Additional options: Annual maintenance with UVV inspection Machine color according to RAL PLC control with automatic press cycle, bale-ready indicator and E-stop with key Additional press chamber (up to 6 chambers total) Strapping bands Power supply 380 - 400 V (3 phases) Twin-chamber baler, baler, paper baler, waste paper baler, cardboard baler, cardboard box baler, film baler, paper bale press, waste baler, refuse press, recycling press, waste compactor, waste press, residual waste press

Gamybos metai: 2003, veikimo valandos: 43 000 h, Sąlyga: reikia remonto (naudotas), mašinos/transporto priemonės numeris: HBC 140 2x75kW 2003 (W230-005), Verkocht door Bollegraaf Recycling Solutions, de originele fabrikant van deze Bollegraaf-pers en -transportband: Bollegraaf HBC140s Balenpers (2x75kW) Pers: Gewicht: 47.100 kg Bouwjaar: 2003 Uitsluitend Hardox bodemplaat Kunststof ventiel Anti-ratten bekabeling Draaiuren: 43.000 Deze balenpers kan ook volledig gereviseerd worden verkocht, conform de 'Bollegraaf OEM Gecertificeerde Revisiestandaarden'. Dit omvat 2 jaar garantie. Neem contact met ons op voor meer informatie of een offerte. Algemene uitgangspunten revisie Reiniging & demontage Voor de daadwerkelijke revisie wordt de pers volledig gereinigd en gedemonteerd in onze revisiewerkplaats. Toleranties Na demontage worden de toleranties van alle stalen componenten gemeten en waar nodig opnieuw gelast. Dit geldt ten minste voor de volgende onderdelen: • Aandrijfram, • Frame, • Kanaal, • Voorpersklep Na demontage en inspectie wordt de ram opnieuw opgelast en voorzien van nieuwe ramwielen. De beschermroosters en de voorpersklep worden uitgedeukt en waar nodig gerepareerd. Overschilderd Na het meten van de toleranties en het uitvoeren van eventuele herstel- en laswerkzaamheden, worden alle onderdelen gestraald en opnieuw gecoat. Hfsdpfx Afokcgynj Ieb Hydrauliek: De hydrauliektank wordt gereinigd. De hydraulische leidingen & slangen worden vervangen. De hydraulische componenten worden opnieuw afgedicht. De hydraulische olie wordt ververst. Bekabeling: Alle bekabeling wordt gecontroleerd en indien nodig vervangen. Alle lasdozen worden vervangen en teruggeplaatst op goed toegankelijke posities. Slijtdelen: Alle slijtdelen worden vervangen. De pennen en assen van de cilinders en het kanaal worden vernieuwd. Alle slijtdelen van de beide naaldeninstallaties en knopers worden vernieuwd. Cilinders: De cilinders worden opnieuw afgedicht en, indien nodig, voorzien van een nieuwe chroomlaag of een nieuwe cilinderstang. MCC-kast De schakelkast wordt gecontroleerd en gereinigd. Indien nodig worden elektronische componenten vernieuwd. De PLC en HMI (bedieningsinterface) worden vervangen door de nieuwste Schneider M340-versie inclusief de nieuwste software.

Gamybos metai: 2008, Sąlyga: naudotas, Naudojimas: Krovinių pervežimas Tinkama naudoti: Mašinoms pakrovimui ir iškrovimui Norėdami gauti daugiau informacijos, susisiekite su ATS Norway. Prašome užklausai nurodyti nuorodos numerį: 20081 Specifikacijos: • Gamybos metai: 2008 • Svoris: 750 kg • Hidraulinė siurblys • Ilgis: 12 metrų • Paruošta pristatymui Hodpfjw Ia Ngjx Af Iefb Aprašymas: Palfinger PK 14080 C kranas, pagamintas 2008 m., su hidrauline siurbliu. Kranas buvo kapitališkai suremontuotas, kai savininkas jį įsigijo. Paruoštas pristatymui. Savaiminis svoris: 750 Modelis: PK 14080 C kranas su hidrauline siurbliu

Sąlyga: naudotas, Gamybos metai: 2012, galia: 264 kW (358,94 AG), Stationary Shredding Plant M & J 4000S. Electric drive: 2x 132 kW 400 V AC, 50 Hz Hedpju Dkf Dsfx Af Iofb Including base frame, hydraulic unit, control cabinet.

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Technical data for the document shredding plant: Manufacturer: HSM GmbH + Co KG General data for the two-stage shredder system: Model: Duo Shredder 5750 Year of manufacture: 2015 Operating hours: 3,093 hours Throughput capacity: up to 800 kg/hour, depending on material Rated power: 30 kW Rated current: 62 A Particle size: 6 x 40 – 53 mm Fuse: 63 A gG/gL/C/K Shredder weight: approx. 2,500 kg Pre-shredder data: Shredder type: V 570 Cutting unit working width: 500 mm Particle cut size: 20 x 155 mm (W x L) Pre-shredder rated power: 2 x 5.5 kW Pre-shredder rated current: 2 x 11.5 A Post-shredder data: Shredder type: P 500.2 Cutting unit working width: 500 mm Particle cut size: 6 x 40 – 53 mm (W x L) Post-shredder rated power: 9.2 kW Post-shredder rated current: 18 A Security level according to DIN 66399: P-3, O-2, T-3, E-2 Baler data: Model: KP 100.1 Hfodpfxjwrybrj Af Ieb Year of manufacture: 2015 Operating hours: 2,377 hours Pressing force: 9 – 12 t Bale weight: 40 – 150 kg/bale, depending on material Cycle time: 7 – 16 seconds Filling chute dimensions: 450 x 580 mm Bale size: 630 x 500 x 400–1000 mm (W x H x L) Binding: triple, horizontal Baler dimensions: 3990 x 2225 x 1735 mm (L x W x H) Baler weight: approx. 1,000 kg Dimensions of the complete system (conveyor, shredder, and baler): 9560 x 2071 x 3550 mm (L x W x H) Functional description: This is a complete installation consisting of a feed conveyor, a two-stage shredding system, and a horizontal baler. Material is fed via the conveyor, shredded in two stages, and then pressed into stackable bales. A second cutting unit and various motors are available as spare parts with the system. Comments: Full documentation (operating manual, electrical/hydraulic diagrams) is available. Inspection possible by appointment. We assume no liability for technical data or possible errors.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2006, Balemaster Year: 2006 Model: CMG 268 Hsdpfx Afsrdwlks Iofb Waste baler